Board.KolibriOS.org

Хотел записать Колибри ОС на SD-карту, но т.к. объём карты 32МБ, она не форматируется в FAT32 (только FAT или NTFS), а inst.exe требует только FAT32.

Подскажите, через dd что надо в MBR записать для FAT?

If I understand correctly, instructions from /programs/hd_load/usb_boot won't work for FAT16 because the loader MTLD_F32 can read only FAT32. I mean it's not enough to change just MBR as you suggested.

But you can boot KolibriOS via syslinux loader. First follow instructions here and then write MBR as described here.

Note that not all computers can boot from SD-cards.

There is an app "MS-SYS" http://ms-sys.sourceforge.net/ (Thanks Freeman for link)
It claims about KolibriOS support. Did anyone tried it?