Page 14 of 17

Re: Тестируем поддержку USB - 2

Posted: Sat Mar 29, 2014 11:51 pm
by Mario_r4
buyerninety wrote:It is not seen in the picture, so the stoopid question must be asked,
The power connection to provide power to the Привод внеш. 3Q DVD±RW 3QODD-T105 -
you tested with?
I did not put the second connector USB, because it is necessary only to record. Drive tray extends and retracts when push the button, so that enough power. USB ATAPI device is not supported by the kernel code, I just know it. I put the log only to have to start with something for future.

Re: Тестируем поддержку USB - 2

Posted: Mon Apr 14, 2014 11:40 pm
by yogev_ezra
SVN #4830
Ноутбук Toshiba Portege R600
Имеется встроенный DVD-RW, подключенный к шине USB. В него был вставлен CD-диск ещё до начала загрузки.
Колибри видит само устройство как 08/05/50 (если я правильно понял лог), но в списке дисков он не отображается.
Логи board + pcidev прилагаю.

Re: Тестируем поддержку USB - 2

Posted: Mon Apr 14, 2014 11:51 pm
by Mario_r4
yogev_ezra wrote:SVN #4830
Ноутбук Toshiba Portege R600
Имеется встроенный DVD-RW, подключенный к шине USB. В него был вставлен CD-диск ещё до начала загрузки.
Колибри видит само устройство как 08/05/50 (если я правильно понял лог), но в списке дисков он не отображается.
Логи board + pcidev прилагаю.
Драйвер ATAPI устройств поддержан только для ATA.

Re: Тестируем поддержку USB - 2

Posted: Tue Apr 15, 2014 12:43 am
by yogev_ezra
Mario_r4 wrote:Драйвер ATAPI устройств поддержан только для ATA.
В моём случае, ИМХО, проблема случается ещё раньше, чем может понадобиться драйвер ATAPI:

Code: Select all

K : device descriptor: 12 01 00 02 00 00 00 40 30 09 05 0C 00 00 01 02 00 01
K : found USB device with ID 0930:0C05, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 C0 01 09 04 00 00 02 08 05 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00
K : USB interface class/subclass/protocol = 08/05/50
K : USB mass storage device detected
K : 1 logical unit(s)
[...]
K : Command 03 failed
K : media is ready
K : 1 attempts, 69 ticks
K : peripheral device type is 05
CleverMouse обрабатывает только Peripheral Device Type 00h - Direct-access block device (e.g., magnetic disk), а у меня здесь 05h.

Re: Тестируем поддержку USB - 2

Posted: Tue Apr 15, 2014 12:58 am
by Mario_r4
yogev_ezra wrote:
Mario_r4 wrote:Драйвер ATAPI устройств поддержан только для ATA.
В моём случае, ИМХО, проблема случается ещё раньше, чем может понадобиться драйвер ATAPI:

Code: Select all

K : device descriptor: 12 01 00 02 00 00 00 40 30 09 05 0C 00 00 01 02 00 01
K : found USB device with ID 0930:0C05, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 C0 01 09 04 00 00 02 08 05 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00
K : USB interface class/subclass/protocol = 08/05/50
K : USB mass storage device detected
K : 1 logical unit(s)
[...]
K : Command 03 failed
K : media is ready
K : 1 attempts, 69 ticks
K : peripheral device type is 05
CleverMouse обрабатывает только Peripheral Device Type 00h - Direct-access block device (e.g., magnetic disk), а у меня здесь 05h.
На предыдущей странице темы я написал тоже самое.

Re: Тестируем поддержку USB - 2

Posted: Tue Apr 15, 2014 1:06 am
by yogev_ezra
Mario_r4 wrote:
yogev_ezra wrote:
Mario_r4 wrote:Драйвер ATAPI устройств поддержан только для ATA.
В моём случае, ИМХО, проблема случается ещё раньше, чем может понадобиться драйвер ATAPI.
CleverMouse обрабатывает только Peripheral Device Type 00h - Direct-access block device (e.g., magnetic disk), а у меня здесь 05h.
На предыдущей странице темы я написал тоже самое.
Да, но у тебя проблема другая - у тебя устройство видится вообще как класс 08/02/50, которое драйвер CleverMouse не поддерживает даже на уровне класса.
А у меня 08/05/50 - этот класс поддерживается, и проблема уже в Peripheral Device Type 05h.

Re: Тестируем поддержку USB - 2

Posted: Mon Apr 21, 2014 6:01 pm
by CleverMouse
Mario_r4 wrote:но похоже еще на низком уровне устройство игнорируется.

Code: Select all

K : USB interface class/subclass/protocol = 08/02/50
K : unknown mass storage device
Странное устройство, в SCSI-интерфейсе 08/06/50 тоже есть подкласс ATAPI, обычно используется именно SCSI-интерфейс.

Re: Тестируем поддержку USB - 2

Posted: Fri Apr 25, 2014 3:58 pm
by Leency
Ноутбук 2005 года Compaq nc6120
USB не работает ни мышки, ни флешки.

BOARDLOG на скринах.
У пользователя Devin memberlist.php?mode=viewprofile&u=6273
Spoiler:
Photo 25-04-14 04 36 39 pm.png
Photo 25-04-14 04 36 39 pm.png (1.09 MiB)
Viewed 12316 times
Spoiler:
Photo 25-04-14 04 36 26 pm.png
Photo 25-04-14 04 36 26 pm.png (818.19 KiB)
Viewed 12316 times

Re: Тестируем поддержку USB - 2

Posted: Fri Apr 25, 2014 5:26 pm
by Devin
Еще добавлю то что usb работают со старой версией колибри-н 2013 года

Что я хочу увидеть в Колибри завтра....

Posted: Fri May 16, 2014 1:07 pm
by eurol
Поддержку US15W хотя бы в части работы USB (если я правильно понял, из-за ее отсутствия у меня ни мышь, ни клава не работают).
И мышь COM-портовая тоже не работает - это у всех или только у меня на моем отдельно взятом чипсете?

Re: Что я хочу увидеть в Колибри завтра....

Posted: Fri May 16, 2014 7:11 pm
by yogev_ezra
EDIT by yogev_ezra: Сообщение перенёс в соответствующую тему.
eurol wrote:Поддержку US15W хотя бы в части работы USB (если я правильно понял, из-за ее отсутствия у меня ни мышь, ни клава не работают).
У меня на Fit-PC2 с US15W всё работало: viewtopic.php?f=30&t=1785&p=48305#p48305
Поэтому нужна полная информация - что за устройство, какая сборка Колибри запускалась, вывод boardlog.txt + pcidev.txt
eurol wrote:И мышь COM-портовая тоже не работает - это у всех или только у меня на моем отдельно взятом чипсете?
Запуск драйвера для мыши COM-портовой нужно включить в AUTORUN.DAT, иначе она не будет работать: viewtopic.php?f=4&t=2344&p=50040#p50040

Re: Что я хочу увидеть в Колибри завтра....

Posted: Fri May 16, 2014 7:57 pm
by hidnplayr
yogev_ezra wrote:
eurol wrote:И мышь COM-портовая тоже не работает - это у всех или только у меня на моем отдельно взятом чипсете?
Запуск драйвера для мыши COM-портовой нужно включить в AUTORUN.DAT, иначе она не будет работать: viewtopic.php?f=4&t=2344&p=50040#p50040
It seems the program commouse has been removed from the distro, but the following line should work:

Code: Select all

/SYS/LOADDRV  "COMMOUSE"	   1	# COM mice detector

Re: Тестируем поддержку USB - 2

Posted: Fri Aug 29, 2014 2:31 pm
by hidnplayr
USB mouse (tablet mode) does not work in virtualbox after the machine has been reset.

After reset, usb information on board log ends with:
K : port_after_reset, status of port 0 is 00000103
And does not continue with .. as normal:
K : device descriptor: 12 01 10 01 00 00 00 08 EE 80 21 00 00 01 01 03 00 01
K : found USB device with ID 80EE:0021, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 80 32 09 04 00 00 01 03 00 00 00 09 21 10 01 00 01 22 55 00 07 05 81 03 08 00 0A
K : USB interface class/subclass/protocol = 03/00/00
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 09 01 A1 00 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 38 15 81 25 7F 75 08 95 01 81 06 05 0C 0A 38 02 95 01 81 06 75 08 95 01 81 03 05 01 09 30 09 31 15 00 26 FF 7F 35 00 46 FF 7F 75 10 95 02 81 02 C0 C0
All other messages on the board are exactly the same.

Re: Тестируем поддержку USB - 2

Posted: Fri Nov 21, 2014 4:26 pm
by hidnplayr
USB does not work on DELL PowerEdge 2400
Controller: 0x1166:0x0220 (USB Open HC)
Spoiler:K : Attach Interrupt 5 Handler 8098C6C3
K : OHCI controller at 00:7A with 4 ports initialized
...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : error 16 in SET_ADDRESS, USB device disabled
K : USB device disconnected
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : error 17 in SET_ADDRESS, USB device disabled
K : USB device disconnected
K : port_after_reset, status of port 1 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 1 is 00000303
K : error 16 in SET_ADDRESS, USB device disabled
K : USB device disconnected
K : port_after_reset, status of port 1 is 00000303
K : error 16 in SET_ADDRESS, USB device disabled
K : USB device disconnected
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : Timeout in USB device initialization, trying to reset...
K : port_after_reset, status of port 0 is 00000303
K : error 17 in SET_ADDRESS, USB device disabled

Re: Тестируем поддержку USB - 2

Posted: Mon Dec 08, 2014 2:52 pm
by hidnplayr
hidnplayr wrote:USB mouse (tablet mode) does not work in virtualbox after the machine has been reset.
Has been fixed in virtualbox 4.3.18.