Встроенные видеокарты Intel

Tue Feb 02, 2016 9:24 pm

Лог c опцией --rc6 1 при выводе изображения на внешний монитор

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6127
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295055000 Hz
K : Attach Interrupt 1 Handler 80039DFC
K : IRQ1 return code 80062E24
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: RTL8106e
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ ãª § , 10% á¢®¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
K : final: hub 80827E50 port 1 status 0101 change 01
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : driver /sys/drivers/usbhid.sys mapped to 8FFFF000
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 00824002 08085002 41010000 008251E0
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 90001000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : final: hub 80827E50 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : Attach Interrupt 11 Handler 80AE8D28
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
DHCP failed
IP address 169.254.93.107 assigned to network interface 1 through Link-Local
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 9022D000

i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 16 bytes
os_mmap 90113000 131072 bytes
cmdline --rc6 1
i915.rc6 = 1

LOG: i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902FC560
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 9011a1a8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,749)@ 129.711056 -> 129.695330 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 9011a1a8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 9011ba78 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 9011d290 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90126cb0
<6>[drm] 90126c20: FB ID: 50 (1)
<6>[drm] main_fb_obj 90126cb0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90137000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90126c20: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] Sink OUI: 00e04c
<6>[drm] Branch OUI: 00e04c
<6>[drm] 90120790: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] looking for preferred mode on connector 41 0
<6>[drm] found mode 1920x1080
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1920x1080 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90126cb0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
enter init_display_kms
enter choose_config
<6>[drm] check_connector connector: 9011e8e0 encode: 9011e2d8 crtc: 901199d8
choose_config connector: 9011e8e0 crtc: 901199d8
leave choose_config
connector: 9011e8e0 crtc: 901199d8
<6>[drm] init_display_kms allocate fb name 1
connector: 9011e8e0 crtc: 901199d8
leave init_cursor
leave init_cursor
init_display_kms line 534
connector: 9011e8e0 crtc: 901199d8
connector: 9011e8e0 crtc: 901199d8
init_display_kms line 549
init_display_kms line 551
init_display_kms line 554
init_display_kms line 556
init_display_kms line 562
init_display_kms line 581
<6>[drm] Manufacturer: SDC Model 5441 Serial Number 0
<6>[drm] set mode 1366 768: crtc 21 connector eDP-1
fb:90126c20 1366x768x pitch 5632 format 34325258
<6>[drm] Allocated atomic state 90146f18
<6>[drm] 90126bb0: blob ID: 49 (1)
<6>[drm] Added [CRTC:21] 90147048 state to 90146f18
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] Added [PLANE:18] 90147318 state to 90146f18
<6>[drm] 90126bb0: blob ID: 49 (2)
<6>[drm] Set [MODE:1366x768] for CRTC state 90147048
<6>[drm] Link plane state 90147318 to [CRTC:21]
<6>[drm] 90126c20: FB ID: 50 (4)
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] Set [FB:50] for plane state 90147318
<6>[drm] Added [CONNECTOR:32] 90147410 state to 90146f18
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] Link connector state 90147410 to [NOCRTC]
<6>[drm] Link connector state 90147410 to [CRTC:21]
<6>[drm] checking 90146f18
<6>[drm] [CRTC:21] mode changed
<6>[drm] Updating routing for [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1] keeps [ENCODER:31:TMDS-31], now on [CRTC:21]
<6>[drm] [CRTC:21] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] State 90146f18 has 1 connectors for [CRTC:21]
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
<6>[drm] clamping display bpp (was 36) to EDID reported max of 18
<6>[drm] DP link computation with max lane count 2 max bw 270000 pixel clock 76300KHz
<6>[drm] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
<6>[drm] DP link bw required 137340 available 432000
<6>[drm] hw max bpp: 36, pipe bpp: 18, dithering: 1
<6>[drm] mismatch in dp_m_n (expected tu 64 gmch 2673519/8388608 link 148528/524288, found tu 64, gmch 2666878/8388608 link 148159/524288)
<6>[drm] mismatch in ips_enabled (expected 0, found 1)
<6>[drm] mismatch in ddi_pll_sel (expected 0x80000000, found 0x20000000)
<6>[drm] mismatch in dpll_hw_state.wrpll (expected 0x90280202, found 0x00000000)
<6>[drm] [CRTC:21][modeset] config 90147048 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 1
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2666878, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] crtc timings: 76300 1366 1430 1478 1606 768 770 775 792, type: 0x48 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 1
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1366x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] Added [CRTC:25] 90147428 state to 90146f18
<6>[drm] Added [CRTC:29] 901476f8 state to 90146f18
<6>[drm] [CRTC:21] has [PLANE:18] with fb 50
<6>[drm] [PLANE:18] visible 1 -> 1, off 1, on 1, ms 1
<6>[drm] commiting 90146f18
<6>[drm]
<6>[drm] set backlight PWM = 0
<6>[drm] cpu backlight was enabled, disabling
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x5 p(0,341)@ 130.390890 -> 130.383730 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=131, hw=8498 hw_last=8367
leave drm_vblank_off
<6>[drm] disabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] Turn eDP port A panel power off
<6>[drm] Wait for panel power off time
<6>[drm] mask b0000000 value 00000000 status 80000008 control abcd0000
<6>[drm] Wait complete
<6>[drm] disable WRPLL 1 (active 1, on? 1) for crtc 21
<6>[drm] disabling WRPLL 1
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76300 kHz framedur 16670406 linedur 21048
<6>[drm] disabling display
<6>[drm] Requesting to disable the power well
<6>[drm] Turn eDP port A panel power on
<6>[drm] Wait for panel power cycle
<6>[drm] Enabling RC6 states: RC6 on
<6>[drm] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
<6>[drm] mask b800000f value 00000000 status 00000000 control abcd0000
<6>[drm] Wait complete
<6>[drm] Wait for panel power on
<6>[drm] mask b000000f value 80000008 status 0000000a control abcd0003
<6>[drm] Wait complete
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
<6>[drm] Using signal levels 00000000
<6>[drm] Using vswing level 0
<6>[drm] Using pre-emphasis level 0
<6>[drm] clock recovery OK
<6>[drm] Channel EQ done. DP Training successful
<6>[drm] enabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] crtc 0 : v 0x7 p(0,-24)@ 131.225170 -> 131.225675 [e 1 us, 0 rep]
<6>[drm]
<6>[drm] pipe A
<6>[drm] set backlight PWM = 937
DRM Erroruncleared fifo underrun on pipe A
DRM ErrorCPU pipe A FIFO underrun
<6>[drm] PSR not supported by this panel
<6>[drm] Panel doesn't support DRRS
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,717)@ 131.240848 -> 131.225757 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(0,717)@ 131.240859 -> 131.225767 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,718)@ 131.240874 -> 131.225761 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-23)@ 131.241951 -> 131.242435 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=1, hw=8501 hw_last=8500
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 131.241974 -> 131.242437 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=8501 hw_last=8501
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(0,-21)@ 131.241988 -> 131.242430 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=8501 hw_last=8501
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-23)@ 131.258622 -> 131.259106 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=1, hw=8502 hw_last=8501
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 131.258644 -> 131.259107 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=0, hw=8502 hw_last=8502
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:40:TMDS-40]
<6>[drm] [ENCODER:43:TMDS-43]
<6>[drm] [ENCODER:45:DP MST-45]
<6>[drm] [ENCODER:46:DP MST-46]
<6>[drm] [ENCODER:47:DP MST-47]
<6>[drm] 90126bb0: blob ID: 49 (1)
<6>[drm] [CRTC:21]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] SPLL
<6>[drm] Clearing atomic state 90146f18
<6>[drm] 90126c20: FB ID: 50 (4)
<6>[drm] Freeing atomic state 90146f18
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] new mode 1366 x 768 pitch 5632
Set DISPLAY handler

P.S. Заметил ещё особенность, при завершении через опцию "Ядро" на внешнем мониторе быстро и кратковременно
промелькивает полоса с остатками рабочего стола. Внутрений становится рабочим.

Fri Feb 05, 2016 9:40 pm

Попробовал на паре компьютеров драйвер i915.
На одном получил креш, а на втором компьютере искажение цветов (потеря) Фоновые цвета рабочего стола стали белым и при запуске программ тоже
потеря цветов. Цвет окна FAR не изменился.

: AAAAAA.LOG (221.62 KiB)
Downloaded 147 times

Креш

: LENOVO.LOG (26.43 KiB)
Downloaded 149 times

Цвета "покрашились"

Sat Feb 06, 2016 1:13 am

Добавил логи.

Sat Feb 06, 2016 2:44 am

Kopa
С первым думаю то же, что и с твоим Асусом, я немного подправил код, надо проверять. У Леново может быть дело в подсветке, тоже проверять. Вот новый кандидат в панацею. http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-6.7z

Sat Feb 06, 2016 2:58 am

Готово для Asus.

: ASUSLOG.LOG (30.56 KiB)
Downloaded 164 times

Sat Feb 06, 2016 3:14 am

Всё немного сложнее с Асус. Ещё тест http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-7.7z

Sat Feb 06, 2016 3:21 am

Готово.

: ASUSN.LOG (30.59 KiB)
Downloaded 146 times

Sat Feb 06, 2016 1:28 pm

Kopa
http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-8.7z

Sat Feb 06, 2016 2:53 pm

Готово, драйвер для ASUS заработал.

: ASUSNN.LOG (38.46 KiB)
Downloaded 140 times

P.S. Похоже только есть неувязка с функцией 18.4

Sat Feb 06, 2016 2:57 pm

Лог с крашем видеосистемы после запуска "тест" программы.
ядро сначало работало, даже при зависании тест программы. а потом и перемещаться окна перестали.
Загрузка CPU 100%.

: ASUSB.LOG (38.91 KiB)
Downloaded 141 times

P.S. На внешний экран ещё не пробовал переключаться.

Sat Feb 06, 2016 3:19 pm

Всё нормально отработало.

: ASUSMM.LOG (29.31 KiB)
Downloaded 135 times

Лог с внешним экраном и не задействовании функции 18.4

P.S. На внутреннем экране, при переключении один раз заметил маленькую локальную область
кратковременного проявления сбитой синхронизации видеосигнала.
Параметр --fbsize 6 всегда нужно устанавливать?

Sat Feb 06, 2016 3:32 pm

Параметр --fbsize 6 всегда нужно устанавливать?

Нет, драйвер уменьшит размер до максимально допустимого. Для Для Асус это 7Мб.

Code: Select all

<6>[drm] Memory reserved for graphics device: 7936K, usable: 7936K
<6>[drm] Adjust framebuffer size to match reserved memory
new fbsize 7MB

Sat Feb 06, 2016 3:56 pm

Для Dell внешние HDMI режимы не появляются в списке выбора.
Переключение только через командную строку.

P.S. В Ubuntu автоматическое переключение на внешний монитор.

Sat Feb 06, 2016 7:01 pm

Kopa wrote:Для Dell внешние HDMI режимы не появляются в списке выбора.
Переключение только через командную строку.
P.S. В Ubuntu автоматическое переключение на внешний монитор.

Они и не должны появляться. vmode работает только с активным монитором. Старая программа. После переключения на другой монитор vmode надо перезапустить.

Mon Feb 08, 2016 4:26 pm

Три лога получил на тестовом компьютере.
При загрузке со стартового экрана не изменяя разрешения, и загрузив драйвер фоновые цвета "белые"
Переключившись далее через VMODE изображение рабочего стола восстанавливается
за исключением того что указатель мыши либо белая полоска, либо белый квадрат 2-3 раза больше стандартного указателя.
Если выбрать родное разрешение монитора 1280x1024x32, то загрузив дальше драйвер получаю чёрный экран.

Лог при этом такой

: c1280x1024x32.log (109.35 KiB)
Downloaded 124 times

P.S. Два других лога размером 50Кб и 21Кб. при необходимости добавлю.

Встроенные видеокарты Intel

Who is online