Intel 8225x

KoOS network development
  • Маршрутизатор (в данном случае ADSL модем подразумевается) сам PPPoE соединение устанавливает или "высокоскоростное соединение" через Виндовс?
    Еще тебе имеет смысл лог от BOARD сюда выложить - это упростит гадание на кофейной гуще.

    Вообще для чего второй маршрутизатор? Наверное это все же коммутатор, а не маршрутизатор.

    З.Ы. А все понятно - маршрутизатор wi-fi.
  • ADSL-модем сам устанавливает соединение. eBox работал при подключении к модему напрямую, без промежуточного маршрутизатора. Маршрутизатор, как ты правильно заметил, Wi-Fi. То есть он раздает Wi-Fi и за одно к нему подключен один комп без Wi-Fi.

    Лог от BOARD без странностей. Zero-conf. Card found (i8225x). Получен MAC-адрес, получены IP.
    Делаю запрос через DNS Resolver, на вкладке kernel вижу socket open, затем через некоторое время socket close.
  • Есть смысл попробовать 0770 - код драйвера менялся в ревизии 2288.
  • Попробовал. No effect.
    На доске в kernel видно tcp__rx dumped (например, E11A-2FFB5F2E-16121 flags 02)
    В ethernet stat при запросе через DNS resolver появляется 1 пакет в NET1OUT Queue, в EMPTY - 13. Когда NET1OUT становится 0, то EMPTY - 14. Card status x12298086.
    При запросе так же в ARPSTAT видно 192.168.0.1, причем stat сначала 200, потом 300. TTL - от 1 до 7.
  • Остается дождаться специалистов. У мну идей нет.
  • Кстати, пробовал и через промежуточный маршрутизатор, и напрямую. IP-адреса везде правильные получаются через zero config.
  • Try setting the DNS server manually to 192.168.0.1
    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
  • I tried with SVN build and 0.7.7.0. Didn't helped.
  • Maybe It's a problem with i8255x driver. I dont really understand everything you said unfortunately.
    Do you have another computer with network port (with windows/linux on it)?

    If so, we can take a look at the packets and see where the problem is.
    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
  • I have notebook connected via Wi-Fi with Windows.
  • Lol. I started HTTPS on Kolibri and can access KOS pc from other PC using it's IP.
  • Few secondds later i got
    K : socket_open_tcp (0x80ECC000)
    K : net_socket_free (0x80ECC000)
    K : socket_open_tcp (fail).

    It's 0.7.7.0.


    I can't connect via telnet, and I can't see anything via httpc (using IP address) too.

    Card is 12298086.
  • And what happens with the latest nightbuild?
    "Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
  • I dont' sure, but I think that nothing was changed. I think I can check this few minutes later.
  • Who is online

    Users browsing this forum: Ahrefs [Bot] and 3 guests