Very strange, do you have a DHCP server on the network? Did zeroconf work on the old kernel?Serge wrote:hidnplayr
My log. Realtek PCIe GBE Family controller PCI\VEN_10EC&DEV_8168&SUBSYS_E0001458&REV_06Spoiler:
Loading RTL8169 driver
Hooking into device, dev:0, bus:3, irq:A, addr:0000DE00
>Zero-config service loaded
->MAC: 1C-6F-65-D7-C8-09
->Trying DHCP
->Socket 00000001 opened
->Socket Bound to local port 68
->Connected to 255.255.255.255 on port 67
->Building request
ETH_input: Unknown packet type=0888
ETH_input: Unknown packet type=0888
->-1 bytes received
Link Local IP assinged: 169.254.132.245
Waiting 1600ms
Sending Probe
Waiting 1240ms
Sending Probe
Waiting 1460ms
Sending Probe
Waiting 2s
Sending Announce
Waiting 2s
Sending Announce
Socket error
Merge new network stack with trunk?
-
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Probably yes. I use dlink DSL2520-U.do you have a DHCP server on the network?
no, zeroconf always hung the kernel.Did zeroconf work on the old kernel?
Serge
If you can find the time and energy, I'd like you to capture the network traffic from your regular os (linux?).
If you can find the time and energy, I'd like you to capture the network traffic from your regular os (linux?).
- -disconnect ethernet cable
-start a wireshark capture on the interface
-reconnect cable
-stop capture after a couple of seconds
-save the captured packets to a file and send them to me
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Serge
I believe a device on your network (your router) was sending "Ethernet flow control" messages to indicate that it is not ready for receiving.
Have you tried running Zeroconfig again after it has terminated?
EDIT: or just try using latest autobuild.
I believe a device on your network (your router) was sending "Ethernet flow control" messages to indicate that it is not ready for receiving.
Have you tried running Zeroconfig again after it has terminated?
EDIT: or just try using latest autobuild.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
In #3649 I remove downloader hack from HTMLv. So now in my VBox it can load pages. You may click at homepage icon and on links here. They will be working well. BUT if there will be any error, for example, page not exists DOWNLOADER will freeze itself and maybe some other programs will be freezed too.
Also please, clarify is there is any SIMPLE way to determine does current network supported or not? In previous version I can find out this information by using Ethstat program.
Also please, clarify is there is any SIMPLE way to determine does current network supported or not? In previous version I can find out this information by using Ethstat program.
Из хаоса в космос
If you open netcfg program you will see if it finds a suitable driver for your card, or not.Leency wrote:Also please, clarify is there is any SIMPLE way to determine does current network supported or not? In previous version I can find out this information by using Ethstat program.
When the driver is loaded (nightbuild loads all drivers automatically), the device will appear on the right hand size in netstat program.
(loopback device is in kernel, and always loaded.)
- Attachments
-
-
koli-net.png (31.33 KiB)Example with two available network cards, which both are supported and both drivers loaded. Viewed 8740 times
-
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Oh, we have loopback? What if I open 127.0.0.1 with running web server?
Yes, it should work.SoUrcerer wrote:Oh, we have loopback? What if I open 127.0.0.1 with running web server?
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
hidnplayr
#3649
Hooking into device, dev:0, bus:3, irq:A, addr:0000DE00
>Zero-config service loaded
->MAC: 1C-6F-65-D7-C8-09
->Trying DHCP
->Socket 00000001 opened
->Socket Bound to local port 68
->Connected to 255.255.255.255 on port 67
->Building request
Sending DHCP discover/request
ETH_input: Unknown packet type=0888
ETH_input: Unknown packet type=0888
No answer from DHCP server
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 2
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got offer, making request
->Building request
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 5
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got ACK, applying settingsping works fine, downloader loads board.kolibrios.org page, but when I click the "stop" button the whole system hangs. And I can not close the program after downloading, looks like unprotect_from_terminate missing somewhere.
#3649
Spoiler:
Loading RTL8169 driverHooking into device, dev:0, bus:3, irq:A, addr:0000DE00
>Zero-config service loaded
->MAC: 1C-6F-65-D7-C8-09
->Trying DHCP
->Socket 00000001 opened
->Socket Bound to local port 68
->Connected to 255.255.255.255 on port 67
->Building request
Sending DHCP discover/request
ETH_input: Unknown packet type=0888
ETH_input: Unknown packet type=0888
No answer from DHCP server
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 2
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got offer, making request
->Building request
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 5
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got ACK, applying settings
Very cool!Serge wrote:hidnplayr
#3649ping works fine, downloader loads board.kolibrios.org page, but when I click the "stop" button the whole system hangs. And I can not close the program after downloading, looks like unprotect_from_terminate missing somewhere.Spoiler:
Loading RTL8169 driver
Hooking into device, dev:0, bus:3, irq:A, addr:0000DE00
>Zero-config service loaded
->MAC: 1C-6F-65-D7-C8-09
->Trying DHCP
->Socket 00000001 opened
->Socket Bound to local port 68
->Connected to 255.255.255.255 on port 67
->Building request
Sending DHCP discover/request
ETH_input: Unknown packet type=0888
ETH_input: Unknown packet type=0888
No answer from DHCP server
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 2
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got offer, making request
->Building request
Sending DHCP discover/request
->548 bytes received
Data received, parsing response
Client: 192.168.1.2
DHCP Msg type: 5
Server: 192.168.1.1
lease: 86400
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 192.168.1.1
Got ACK, applying settings
The problem with downloader is caused by SOCKET_process_end, it never finishes because mutex cannot be set.
It seems that when program calls SOCKET_close, mutex stays set, I'm debugging that now.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
ПРАВКА:Я был за, и я рад, что всё произошло успешно.
Ты поздно "за", потому что это уже случилосьramiil-kun wrote:Добавит ли это больше возможности? Упростит ли разработку? Много ли софта заведётся сразу или с минимальным допиливанием?
Если как минимум 2 ответа да, то я за.
Who is online
Users browsing this forum: No registered users and 0 guests