Realtek RTL8139
-
It does not work network. No notification even successful network settings. Should two network cards. The second (rtl8169 works, though not for a long time)
- Attachments
-
-
LOG.7z (3.12 KiB)Downloaded 444 times
-
to infinity and beyond
Current zeroconfig only works with the first registered network card.punk_joker wrote:It does not work network. No notification even successful network settings. Should two network cards. The second (rtl8169 works, though not for a long time)
Edit autorun.dat and remove "netcfg A".
After boot, run netcfg and select the wanted ethernet card.
(Or, remove rtl8169.obj from kolibri.img and only rtl8139.obj will be loaded)
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
rtl8139 Network some time stops working. On board: HTTP GET error
to infinity and beyond
More details please.
Are you using an emulator or real hardware?
Does the network completely stop working and does not recover?
When does it stop working? After heavy usage? After a certain amount of time, even when no heavy usage?
Are you using an emulator or real hardware?
Does the network completely stop working and does not recover?
When does it stop working? After heavy usage? After a certain amount of time, even when no heavy usage?
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
In my case, it falls on the real hardware, and in the emulator. Falls after a certain period of time. Restarting @ zerokonf sometimes restores the network, but then it stops working again. When the connection can not be restored, written on board: not answer from DHCP server/
to infinity and beyond
I am tested another PCI lan card on chip rtl8139. Connected lan cable is detected, but network don't work.
P.S. My two cards on chip rtl8139 don't work in KolibriOS.
P.S. My two cards on chip rtl8139 don't work in KolibriOS.
- Attachments
-
-
BOARDLOG.TXT (8.52 KiB)Downloaded 396 times
-
to infinity and beyond
punk_joker:
Where is the Ethernet cable connected to? Is there a DHCP server on the network?
More details about the network card(s) please, post PCI vendor, device and revision ID or pcidev.txt
Also, what is the name of the interface(s) in netstat? (for example: RTL8139D)
Where is the Ethernet cable connected to? Is there a DHCP server on the network?
More details about the network card(s) please, post PCI vendor, device and revision ID or pcidev.txt
Also, what is the name of the interface(s) in netstat? (for example: RTL8139D)
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Also, try (re)connecting the cable after the system had time to initialize.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Reconnect the cable failshidnplayr wrote:Also, try (re)connecting the cable after the system had time to initialize.
Spoiler:
RTL8139: no linkRTL8139: link changed to 100 mbit
Trying to contact DHCP server
DHCP failed
IP address 169.254.93.106 assigned to network interface 1 through Link-Local
IPv4_output: No route to host!
UDP_output: failed
CP866
CP866
IPv4_output: No route to host!
UDP_output: failed
RTL8139: no link
HTTP GET error!
CP866
CP866
RTL8139: link changed to 100 mbit
Trying to contact DHCP server
DHCP failed
IP address 169.254.220.189 assigned to network interface 1 through Link-Local
IPv4_output: No route to host!
UDP_output: failed
HTTP GET error!
CP866
CP866
K : destroy app object
to infinity and beyond
RTL8139D
- Attachments
-
-
PCIDEV.TXT (3.12 KiB)Downloaded 422 times
-
to infinity and beyond
punk_joker: There was a bug in TX configuration which resulted in problems on RTL8139D cards, this has been fixed.
Check again if everything works on latest nightbuild.
Check again if everything works on latest nightbuild.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Who is online
Users browsing this forum: No registered users and 1 guest