Page 7 of 41
Re: Новые драйвера для ATI Radeon.
Posted: Tue Feb 19, 2008 2:42 pm
by Maxis
Вторая. Sapphire Radeon x1600pro 512Mb PCI-e.
Code: Select all
Unknown card detected: 000071C2:0000174B:00000000.
Detected an ATI Radeon X1600 PRO on an unidentified card
Memory base_0 C0000000 size 10000000
Memory base_1 00000000 size 00000001
Memory base_2 DFFE0000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000100
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 00000000 size 00000001
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 0000E800 size 00000100
Io base_5 00000000 size 00000001
Mapped IO at 80C9C000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x00000840
IOBaseAddress: 0x0000E800
Filename: 3C8403SA.008
BIOS Bootup Message:
RV530PRO BIOS DDR2 500e/405m
Call to AtomBIOS Init succeeded
Detected VGA mode
Re: Новые драйвера для ATI Radeon.
Posted: Tue Feb 19, 2008 5:13 pm
by paladinrus
Пардон, невнимательно читал
.
Вот
Code: Select all
Unknown card detected: 00007280:0000174B:00000000.
Detected an ATI Radeon X1950 on an unidentified card
Memory base_0 E0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 F1000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 00009000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80DC9000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E190
IOBaseAddress: 0x00009000
Filename: SA999E25.003
BIOS Bootup Message:
113-A99931-00 RV570 BIOS 702m/581e
Call to AtomBIOS Init succeeded
Detected VGA mode.
.
Re: Новые драйвера для ATI Radeon.
Posted: Wed Feb 20, 2008 12:04 am
by Wildwest
Второй тест
Code: Select all
Unknown card detected: 00007187:0000174B:00000000.
Detected an ATI Radeon X1300/X1550 on an unidentified card
Memory base_0 D0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 E5000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 0000C000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80EE4000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x00003000
IOBaseAddress: 0x0000C000
Filename: JC8513SA.002
BIOS Bootup Message:
X1550 Rialto 256mb DDR2 BIOS 550e/400m Channel AB
Call to AtomBIOS Init succeeded
Detected VGA mode.
Re: Новые драйвера для ATI Radeon.
Posted: Wed Feb 20, 2008 8:47 am
by <Lrz>
Code: Select all
Unknown card detected: 000071C6:0000174B:00000000.
Detected an ATI Radeon X1650 on an unidentified card
Memory base_0 D0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 E1000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 0000C000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80DB4000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E040
IOBaseAddress: 0x0000C000
Filename: 8E0402SA.003
BIOS Bootup Message:
RV530XT AGP Rialto BIOS DDR2 550e/650m
Call to AtomBIOS Init succeeded
Detected VGA mode.
Re: Новые драйвера для ATI Radeon.
Posted: Wed Feb 20, 2008 1:43 pm
by Serge
Спасибо всем за тесты.
Вот ещё один
ftp://kolibrios.org/upload/rhd_03.7z
Большая часть для карт с ATOMBIOS. На других картах
просто повторение предыдущих.
Информация о разъёмах и подключённых устройствах
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x01000000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x01000000
rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x01005000 VRAM End: 0x10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 500000
Default Memory Clock: 405000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 500000
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 1
Attaching Output DAC B to Connector DVI-I 1
Re: Новые драйвера для ATI Radeon.
Posted: Wed Feb 20, 2008 7:31 pm
by paladinrus
Вот третий тест
Code: Select all
Detected an ATI Radeon X1950 on a Sapphire X1950 Pro
Memory base_0 0xE0000000 size 0x10000000
Memory base_2 0xF1000000 size 0x00010000
Io base_1 0x00009000 size 0x00000100
Mapped IO at 80DB3000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E190
IOBaseAddress: 0x00009000
Filename: SA999E25.003
BIOS Bootup Message:
113-A99931-00 RV570 BIOS 702m/581e
Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x1FFFB000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x1FFFB000
rhdAtomAllocateFbScratch: FW FB scratch area 1FFFB000 (size: 00005000) extends beyond available framebuffer size 10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 581000
Default Memory Clock: 702000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 581000
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: DVI-I Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
AtomBIOS Connector[9]: DVI-I Device: DFP3 Output: 4 HW DDC 0 HPD 1
Connector[0] {RHD_CONNECTOR_DVI, " CRT1 DFP3", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_DACA, RHD_OUTPUT_LVTMA } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1 DFP3) type 2, ddc 0, hpd 2
Attaching Output DAC A to Connector DVI-I 1
Attaching Output TMDS B to Connector DVI-I 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 2
Attaching Output DAC B to Connector DVI-I 2
.
Re: Новые драйвера для ATI Radeon.
Posted: Thu Feb 21, 2008 9:10 am
by <Lrz>
Unknown card detected: 000071C6:0000174B:0000E040.
Detected an ATI Radeon X1650 on an unidentified card
Memory base_0 0xD0000000 size 0x10000000
Memory base_2 0xE1000000 size 0x00010000
Io base_1 0x0000C000 size 0x00000100
Mapped IO at 80D9E000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E040
IOBaseAddress: 0x0000C000
Filename: 8E0402SA.003
BIOS Bootup Message:
RV530XT AGP Rialto BIOS DDR2 550e/650m
Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x0FFFB000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x0FFFB000
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 600000
Default Memory Clock: 700000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 600000
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 1
Attaching Output DAC B to Connector DVI-I 1
Re: Новые драйвера для ATI Radeon.
Posted: Thu Feb 21, 2008 4:37 pm
by Serge
Новый супертест для карт с ATOMBIOS.
ftp://kolibrios.org/upload/rhd_04.7z
Определение монитора и доступных режимов.
начало теста повторяется поэтом интересен последний фрагмент
EDID data for SyncMaster
Manufacturer: SAM Model: 2a1 Serial#: 1346777401
Year: 2007 Week: 24
EDID Version: 1.3
Digital Display Input
Max H-Image Size [cm]: horiz.: 38 vert.: 30
Gamma: 2.20
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
Supported VESA Video Modes:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Supported Future Video Modes:
#0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
#1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
#2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
Supported additional Video Mode:
clock: 108.0 MHz Image Size: 376 x 301 mm
h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
Monitor name: SyncMaster
Serial No: HMBP600201
Connector "DVI-I 1" uses Monitor "SyncMaster":
Bandwidth: 140MHz
Horizontal timing:
30.0 - 81.0kHz
Vertical timing:
56.0 - 75.0Hz
DPI: 86x87
Allows reduced blanking.
Attached modes:
Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
Modeline "640x480" 31.00 640 656 720 840 480 481 484 500 -hsync -vsync
Modeline "640x480" 31.00 640 664 704 832 480 489 491 520 -hsync -vsync
Modeline "640x480" 30.00 640 704 768 864 480 483 486 525 -hsync -vsync
Modeline "640x480" 25.00 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "720x400" 28.00 720 738 846 900 400 412 414 449 -hsync +vsync
Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
Modeline "1024x768" 78.00 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
Modeline "832x624" 57.00 832 864 928 1152 624 625 628 667 -hsync -vsync
Modeline "800x600" 49.00 800 816 896 1056 600 601 604 625 +hsync +vsync
Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
Modeline "1280x1024" 109.00 1280 1361 1496 1712 1024 1027 1034 1063 -hsync +vsync
Modeline "1280x960" 101.00 1280 1358 1493 1706 960 963 967 996 -hsync +vsync
Modeline "1152x864" 104.00 1152 1227 1349 1546 864 867 871 905 -hsync +vsync
Listing modesetting layout:
CRTC 1: tied to PLL 1 and LUT A:
Outputs: TMDS A (DVI-I 1)
CRTC 2: unused
Unused Outputs: DAC A, DAC B
Re: Новые драйвера для ATI Radeon.
Posted: Thu Feb 21, 2008 7:22 pm
by Wildwest
Провести 3-й и 4-й тесты не удается. На доске отладки пишет
Unresolved PciRead16
Unresolved PciRead8
Unresolved PciWrite16
Unresolved PciWrite8
Re: Новые драйвера для ATI Radeon.
Posted: Thu Feb 21, 2008 8:11 pm
by Serge
Wildwest
Надо обновить ядро до #747+. Можно скачать с rhd_02
Re: Новые драйвера для ATI Radeon.
Posted: Fri Feb 22, 2008 3:03 pm
by Wildwest
Code: Select all
Detected an ATI Radeon X1300/X1550 on a RV516 : Radeon X1300/X1550
Memory base_0 0xd0000000 size 0x10000000
Memory base_2 0xe5000000 size 0x10000
Io base_1 0xc000 size 0x100
Mapped IO at 80e9b000 (size 10000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x174b SubsystemID: 0x3000
IOBaseAddress: 0xc000
Filename: JC8513SA.002
BIOS Bootup Message:
X1550 Rialto 256mb DDR2 BIOS 550e/400m Channel AB
Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x7ffb000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x7ffb000
rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 550000
Default Memory Clock: 400000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 550000
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Output: 1100000
Maximum Pixel Clock: 400000
Reference Clock: 27000
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
AtomBIOS Connector[9]: DVI-I Device: DFP3 Output: 4 HW DDC 1 HPD 1
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " CRT2 DFP3", RHD_DDC_1, RHD_HPD_0 /*swapped*/, { RHD_OUTPUT_DACB, RHD_OUTPUT_LVTMA } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( CRT2 DFP3) type 2, ddc 1, hpd 2
Attaching Output DAC B to Connector DVI-I 1
Attaching Output TMDS B to Connector DVI-I 1
DACASense: DAC: 0x07
DACBSenseCRT: connector type 4 is not supported.
I2C device "RHD I2C line 0:ddc2" registered at address 0xa0.
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4993
Sections to follow: 0
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
I2C device "RHD I2C line 0:ddc2" removed.
EDIDModeFromDetailedTiming: Ignoring: We only handle separate sync.
EDID data for AL1923
Manufacturer: ACR Model: 783 Serial#: 4418
Year: 2006 Week: 35
EDID Version: 1.3
Analog Display Input, Input Voltage Level: 0.700/0.700 V
Sync: Separate
Max H-Image Size [cm]: horiz.: 37 vert.: 30
Gamma: 2.20
DPMS capabilities: Suspend Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.651 redY: 0.320 greenX: 0.300 greenY: 0.600
blueX: 0.153 blueY: 0.109 whiteX: 0.313 whiteY: 0.329
Supported VESA Video Modes:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Supported Future Video Modes:
#0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
#1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
#2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
#3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
Supported additional Video Mode:
clock: 108.0 MHz Image Size: 5 x 4 mm
h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
Ranges: V min: 55 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
Monitor name: AL1923
ACER-V1.00
Connector "VGA 1" uses Monitor "AL1923":
Bandwidth: 140MHz
Horizontal timing:
30.0 - 81.0kHz
Vertical timing:
55.0 - 75.0Hz
DPI: 88x87
Attached modes:
Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
Modeline "640x480" 31.00 640 656 720 840 480 481 484 500 -hsync -vsync
Modeline "640x480" 31.00 640 664 704 832 480 489 491 520 -hsync -vsync
Modeline "640x480" 30.00 640 704 768 864 480 483 486 525 -hsync -vsync
Modeline "640x480" 25.00 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "720x400" 28.00 720 738 846 900 400 412 414 449 -hsync +vsync
Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
Modeline "1024x768" 78.00 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
Modeline "832x624" 57.00 832 864 928 1152 624 625 628 667 -hsync -vsync
Modeline "800x600" 49.00 800 816 896 1056 600 601 604 625 +hsync +vsync
Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
Modeline "1152x864" 104.00 1152 1227 1349 1546 864 867 871 905 -hsync +vsync
Modeline "1280x720" 74.00 1280 1342 1474 1668 720 723 728 748 -hsync +vsync
Modeline "1280x960" 101.00 1280 1358 1493 1706 960 963 967 996 -hsync +vsync
Modeline "1280x1024" 109.00 1280 1361 1496 1712 1024 1027 1034 1063 -hsync +vsync
Listing modesetting layout:
CRTC 1: tied to PLL 1 and LUT A:
Outputs: DAC A (VGA 1)
CRTC 2: unused
Unused Outputs: DAC B, TMDS B
Re: Новые драйвера для ATI Radeon.
Posted: Fri Feb 22, 2008 3:44 pm
by Serge
Wildwestclock: 108.0 MHz Image Size: 5 x 4 mm
Так всё время определяется?
P.S.
Хорошая новость. Смена видеорежима успешно работает.
Re: Новые драйвера для ATI Radeon.
Posted: Fri Feb 22, 2008 10:49 pm
by paladinrus
Четвёртый тест.
Re: Новые драйвера для ATI Radeon.
Posted: Sat Feb 23, 2008 2:46 pm
by Wildwest
всё время
Re: Новые драйвера для ATI Radeon.
Posted: Sat Feb 23, 2008 5:19 pm
by Ghost
Serge
Смена режима через V86 или средствами драйвера?