Board.KolibriOS.org

Готово

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6122
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295064000 Hz
K : Attach Interrupt 1 Handler 80039DF8
K : IRQ1 return code 80062E24
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: RTL8106e
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 8FFFF000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : driver /sys/drivers/usbhid.sys mapped to 90101000
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80827E50 port 4 status 0103 change 10
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Attach Interrupt 11 Handler 80AE8D28
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
IP address 172.26.42.61 assigned to network interface 1 by DHCP
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90291000

i915 v4.4.1 debug-3 build Feb 2 2016 00:32:05
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 9010f000 131072 bytes
cmdline -v HDMI-A-1:1360x768
i915.cmdline_mode =HDMI-A-1:1360x768

LOG: i915 v4.4.1 debug-3 build Feb 2 2016 00:32:05
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 90360620
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1360x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901161b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,86)@ 131.680872 -> 131.679066 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90117a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901192a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90122cc0
<6>[drm] 90122c30: FB ID: 50 (1)
<6>[drm] main_fb_obj 90122cc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90236000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90122c30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] Sink OUI: 00e04c
<6>[drm] Branch OUI: 00e04c
<6>[drm] 9011c7a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 105:"1360x768" 60 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1360x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1360x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90122cc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] use CRTC 901159e8 ID 21
<6>[drm] init_display_kms allocate fb name 1
init_display_kms line 515
enter init_cursor
init_cursor line 792
init_cursor line 794
init_cursor line 797
init_cursor line 799
init_cursor line 804
init_cursor line 806
init_cursor line 815
init_cursor line 818
init_cursor line 827
init_cursor line 839
init_cursor line 843
leave init_cursor
enter init_cursor
init_cursor line 792
init_cursor line 794
init_cursor line 797
init_cursor line 799
init_cursor line 804
init_cursor line 806
init_cursor line 815
init_cursor line 818
init_cursor line 827
init_cursor line 839
init_cursor line 843
leave init_cursor
init_display_kms line 522
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 00000300 EBX : 9011D768 ECX : 0010BB00
K : EDX : 00000200 ESI : 903A8440 EDI : 80041FD8
K : EBP : 9010ED70 EIP : 90325E60 ESP : 9010ED28
K : Flags : 00011006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 90325E60 [ESP+04]: 00000008 [ESP+08]: 00011006
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 0000020A
K : [ESP+24]: 00000000 [ESP+28]: 02000000 [ESP+32]: 9011D798
K : Process - forced terminate PID: 00000002 [OS]
K : Page fault
K : EAX : 0010BB00 EBX : 00000116 ECX : 00000116
K : EDX : 00000040 ESI : 80827028 EDI : 8001D411
K : EBP : 8003D3ED EIP : 90324D5F ESP : 80821D88
K : Flags : 00210002 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 90324D5F [ESP+04]: 00000008 [ESP+08]: 00210002
K : [ESP+12]: 00000000 [ESP+16]: 8003D3ED [ESP+20]: 00000116
K : [ESP+24]: 80827028 [ESP+28]: 8003A223 [ESP+32]: 80827028

Что странное. Утром буду разбираться.

Лог Asus900

Spoiler:

K : kernel SVN r6122
K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80038E70
K : Set IDE IRQ14 return code 80062E10
K : Attach Interrupt 15 Handler 80038E70
K : Set IDE IRQ15 return code 80062E24
K : driver /rd/1/drivers/vidintel.sys mapped to 80B3E000
Intel videocard detected, PciId=8086:2592, which is known
K : driver /sys/drivers/UHCI.sys mapped to 80B42000
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 7 Handler 80B426C1
K : UHCI 80B45830 connect status changed, 009B/0091
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 3 Handler 80B426C1
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80B426C1
K : UHCI 80B49830 connect status changed, 009B/0091
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80B426C1
K : UHCI 80B4B830 connect status changed, 0093/0091
K : Attach Interrupt 1 Handler 80039DF8
K : IRQ1 return code 80062E88
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80C57000
K : UHCI 80B45830 status 0280/0093
K : reset done
K : UHCI 80B49830 status 0280/0093
K : reset done
K : UHCI 80B4B830 status 0280/0093
K : reset done
K : UHCI 80B45830 status 0095
K : UHCI 80B49830 status 0095
K : UHCI 80B4B830 status 0095
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 40 00 FF 07 05 02 02 40 00 FF
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 40 00 00 07 05 82 02 40 00 00
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 80C60000
K : USB mass storage device detected
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 1 logical unit(s)
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 2 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : Command 03 failed
K : sector size is 512, last sector is 60437491
K : Command 03 failed
K : Command 03 failed
K : media not ready
K : peripheral device type is 00
K : direct-access mass storage device detected
K : TD failed:
K : 007B5484 394007FF 00E90169 007BCD90
K : 00000001 80C606F9 80828EE0 80C5C494
K : pipe: 007B4192 007B5FC4
K : error 4 after -2134505735 bytes in data stage
K : config descriptor: 09 02 49 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 A7 00 81 00 04 01 00 00 01 00 1B 24 04 01 04 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 A0 00 78 00 00 CA 08 00 00 CA 08 00 00 96 00 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 02 01 B0 00 90 00 00 9A 0B 00 00 9A 0B 00 00 C6 00 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 03 01 40 01 F0 00 00 28 23 00 00 28 23 00 00 58 02 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 04 01 60 01 20 01 00 68 2E 00 00 68 2E 00 00 18 03 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 FF 03 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 FF 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 FF 02 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Attach Interrupt 12 Handler 80C57546
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80D6D000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80DB5000
Detecting hardware...
Loading INTEL_HDA
K : driver /sys/drivers/INTEL_HDA.sys mapped to 80DBC000
HDA test version 019
detect hardware...
Intel 82801F
PCI command 00000006
PCI status 00000010
lower mmio base F7EB8004
upper mmio base 00000000
GCAP = 00004401
codec_mask = 00000001
create primary buffer ...done
K : Attach Interrupt 5 Handler 80DBCA34
L: /SYS/@SS Param: ASSM
codec probed OK
CAd = 0
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80DD8000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 100 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
Setup FG nodes = start_nid:total_nodes = 1:1
L: /SYS/SEARCHAP Param:
FG type = 1
Setup FG nodes = start_nid:total_nodes = 2:25
Realtek ALC662
Pin Nid = 14
Pin Control = 00000020
Pin Capabilities = 0001003C
Pin def_cfg = 99130110
Pin Amp Out caps = 80000000
AUD_OUT found 2
UNMUTE OUT: NID=2
Amp val = 40:3
CONNECT: NID=C
IDX=0
UNMUTE OUT: NID=14
Enable EAPD: NID=14
UNMUTE OUT: NID=14
Enable EAPD: NID=14
Pin Nid = 1B
Pin Control = 00000020
Pin Capabilities = 0000173C
Pin def_cfg = 0121401F
Pin Amp Out caps = 80000000
AUD_OUT found 2
UNMUTE OUT: NID=2
Amp val = 40:3
CONNECT: NID=C
IDX=0
CONNECT: NID=1B
IDX=0
UNMUTE OUT: NID=1B
UNMUTE OUT: NID=1B
val=2
val=2
hda_codec_setup_stream: NID=2
stream=1
channel=0
format=11
Normal mode !
NewVolume: 0000095B
MinVolume: 000012C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 873ED000

i915 v4.4.1 debug-3 build Feb 2 2016 00:32:05
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 16 bytes
os_mmap 8726b000 131072 bytes
cmdline --fbsize 6
i915.fbsize =6

LOG: i915 v4.4.1 debug-3 build Feb 2 2016 00:32:05
PCI device 8086:2641 bus:0 devfn:f8
PCI device 8086:2592 bus:0 devfn:10
PCI device 8086:2590 bus:0 devfn:0
<6>SMBIOS 2.5 present.
<7>DMI: ASUSTeK Computer INC. 900/900, BIOS 1006 03/03/2009
<6>[drm] device 8086:2592
<6>[drm]
<6>[drm] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found.
Info intel_gmch_probe Intel 915GM Chipset
Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
Info intel_gtt_stolen_size detected 8192K stolen memory
<6>[drm] Memory usable by graphics device = 256M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 8M
<6>[drm] ppgtt mode: 0
<6>[drm] enable MCHBAR
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 100000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT ALVISO d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is static
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] VBT initial LVDS value 40000300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] No PSR BDB found.
<6>[drm] GTT within stolen memory at 0x3ffc0000-0x3fffffff
<6>[drm] Stolen memory adjusted to 0x3f800000-0x3ffbffff
<6>[drm] Memory reserved for graphics device: 7936K, usable: 7936K
<6>[drm] enabling always-on
<6>[drm] irq=5
K : Attach Interrupt 5 Handler 874BC620
<6>[drm] 2 display pipes available.
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe A sprite A init failed: -19
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe B sprite B init failed: -19
<6>[drm] Current CD clock rate: 190000 kHz
<6>[drm] Max CD clock rate: 190000 kHz
<6>[drm] Max dotclock rate: 342000 kHz
i915_driver_thread
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus panel] NAK on first message, retry
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus panel
<6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] detected single-link lvds configuration
<6>[drm] Connector LVDS-1 backlight initialized, enabled, brightness 2374880/3784965
<6>[drm] [CRTC:20] hw state readout: disabled
<6>[drm] [CRTC:23] hw state readout: enabled
<6>[drm] [ENCODER:25:LVDS-25] hw state readout: enabled, pipe B
<6>[drm] [ENCODER:29:DAC-29] hw state readout: disabled, pipe A
<6>[drm] [CONNECTOR:24:LVDS-1] hw state readout: enabled
<6>[drm] [CONNECTOR:28:VGA-1] hw state readout: disabled
<6>[drm] Set [MODE:1024x600] for CRTC state 87273478
<6>[drm] crtc 23: hwmode: htotal 1344, vtotal 625, vdisplay 600
<6>[drm] crtc 23: clock 48000 kHz framedur 17500000 linedur 28000
<6>[drm] [CRTC:20][setup_hw_state] config 87271f00 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] crtc 1 : v 0x5 p(865,214)@ 125.230000 -> 125.223989 [e 0 us, 0 rep]
<6>[drm] [CRTC:23] wrong plane connection detected!
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 1, ret: 0
<6>[drm] crtc 1 : v 0x5 p(1021,215)@ 125.230000 -> 125.223958 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=1, diff=0, hw=7559 hw_last=7559
enter drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-465,-23)@ 125.240000 -> 125.240653 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=1, diff=1, hw=7560 hw_last=7559
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-851,-23)@ 125.250000 -> 125.250661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=2, diff=1, hw=7561 hw_last=7560
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] set backlight PWM = 0
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-865,-23)@ 125.270000 -> 125.270662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=3, diff=1, hw=7562 hw_last=7561
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-862,-23)@ 125.290000 -> 125.290661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=4, diff=1, hw=7563 hw_last=7562
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-846,-23)@ 125.300000 -> 125.300661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=5, diff=1, hw=7564 hw_last=7563
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-885,-23)@ 125.320000 -> 125.320662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=6, diff=1, hw=7565 hw_last=7564
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-841,-23)@ 125.340000 -> 125.340661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=7, diff=1, hw=7566 hw_last=7565
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-874,-23)@ 125.350000 -> 125.350662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=8, diff=1, hw=7567 hw_last=7566
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-873,-23)@ 125.370000 -> 125.370662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=9, diff=1, hw=7568 hw_last=7567
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-699,-23)@ 125.390000 -> 125.390658 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=10, diff=1, hw=7569 hw_last=7568
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-856,-23)@ 125.400000 -> 125.400661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=11, diff=1, hw=7570 hw_last=7569
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-852,-23)@ 125.420000 -> 125.420661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=12, diff=1, hw=7571 hw_last=7570
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-864,-23)@ 125.440000 -> 125.440662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=13, diff=1, hw=7572 hw_last=7571
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-870,-23)@ 125.450000 -> 125.450662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=14, diff=1, hw=7573 hw_last=7572
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-801,-23)@ 125.470000 -> 125.470660 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=15, diff=1, hw=7574 hw_last=7573
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
eenter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-788,-23)@ 125.490000 -> 125.490660 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=16, diff=1, hw=7575 hw_last=7574
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblankenter drm_vblank_off
<6>[drm] crtc 1 : v 0x5 p(1062,250)@ 125.500000 -> 125.492977 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=17, diff=0, hw=7575 hw_last=7575
leave drm_vblank_off
<6>[drm] disabling pipe B
<6>[drm] disabling pfit, current: 0x80002668
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] [CRTC:23] hw state adjusted, was enabled, now disabled
<6>[drm] 872762f8: blob ID: 30 (1)
<6>[drm] Set [NOMODE] for CRTC state 87273478
<6>[drm] [CRTC:23][setup_hw_state] config 87273478 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1024x600" 57 48000 1024 1044 1054 1344 600 602 605 625 0x40 0x5
<6>[drm] crtc timings: 48000 1024 1044 1054 1344 600 602 605 625, type: 0x40 flags: 0x5
<6>[drm] port clock: 48000
<6>[drm] pipe src size: 800x600
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x98086000, dpll_md: 0x0, fp0: 0x21305, fp1: 0x31108
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:21 plane: 1.0 idx: 2 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:22 plane: 1.2 idx: 3 disabled, scaler_id = 0
<6>[drm] disabling always-on
<6>[drm] clearing unused GTT space: [0, ffff000]
<6>[drm] fake context support initialized
<6>[drm] creating stolen object: size=20000
<6>[drm] offset=0x0, size=131072
<6>[drm] Current CD clock rate: 190000 kHz
<6>[drm] pipe A not active or no fb, skipping
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] no active fbs found, not using BIOS config
<6>[drm] [CONNECTOR:24:LVDS-1]
<6>[drm] [CONNECTOR:24:LVDS-1]
<6>[drm] [CONNECTOR:24:LVDS-1] probed modes :
<6>[drm] Modeline 30:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [CONNECTOR:28:VGA-1] force=1
<6>[drm] enabling always-on
<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus vga] NAK on first message, retry<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
<6>[drm] CRT not detected via DDC:0x50 [no valid EDID found]
<6>[drm] [CONNECTOR:28:VGA-1], [ENCODER:29:DAC-29]
<6>[drm] Allocated atomic state 87278de0
<6>[drm] Added [CONNECTOR:28] 87278f70 state to 87278de0
<6>[drm] Added [CRTC:20] 87278f88 state to 87278de0
<6>[drm] creating tmp fb for load-detection
<6>[drm] Added [PLANE:18] 872798e0 state to 87278de0
<6>[drm] Link plane state 872798e0 to [CRTC:20]
<6>[drm] 87279850: FB ID: 31 (1)
<6>[drm] Set [FB:31] for plane state 872798e0
<6>[drm] checking 87278de0
<6>[drm] [CRTC:20] mode changed
<6>[drm] [CRTC:20] enable changed
<6>[drm] Updating routing for [CONNECTOR:28:VGA-1]
<6>[drm] [CONNECTOR:28:VGA-1] keeps [ENCODER:29:DAC-29], now on [CRTC:20]
<6>[drm] [CRTC:20] active changed
<6>[drm] [CRTC:20] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:20] to 87278de0
<6>[drm] State 87278de0 has 1 connectors for [CRTC:20]
<6>[drm] Adding all current connectors for [CRTC:20] to 87278de0
<6>[drm] [CONNECTOR:28:VGA-1] checking for sink bpp constrains
<6>[drm] hw max bpp: 24, pipe bpp: 24, dithering: 0
<6>[drm] mismatch in base.adjusted_mode.crtc_hdisplay (expected 0, found 640)
<6>[drm] mismatch in base.adjusted_mode.crtc_htotal (expected 0, found 832)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_start (expected 0, found 640)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_end (expected 0, found 832)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_start (expected 0, found 664)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_end (expected 0, found 704)
<6>[drm] mismatch in base.adjusted_mode.crtc_vdisplay (expected 0, found 480)
<6>[drm] mismatch in base.adjusted_mode.crtc_vtotal (expected 0, found 520)
<6>[drm] mismatch in base.adjusted_mode.crtc_vblank_start (expected 0, found 480)
<6>[drm] mismatch in base.adjusted_mode.crtc_vblank_end (expected 0, found 520)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_start (expected 0, found 489)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_end (expected 0, found 491)
<6>[drm] mismatch in pixel_multiplier (expected 0, found 1)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NHSYNC) (expected 0, found 2)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NVSYNC) (expected 0, found
<6>[drm] mismatch in base.adjusted_mode.crtc_clock (expected 0, found 31500)
<6>[drm] mismatch in port_clock (expected 0, found 31500)
<6>[drm] [CRTC:20][modeset] config 87278f88 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 24, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
<6>[drm] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
<6>[drm] port clock: 31500
<6>[drm] pipe src size: 640x480
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = 0
WARN_ON(!connector_state->crtc)
WARNING: at intel_display.c:12132
WARN_ON(was_visible)
WARNING: at intel_display.c:11680
<6>[drm] [CRTC:20] has [PLANE:18] with fb 31
<6>[drm] [PLANE:18] visible 0 -> 1, off 0, on 1, ms 1
<6>[drm] commiting 87278de0
<3>Architecture has no drm_cache.c support

WARNING: at ../drm_cache.c:119
<6>[drm] memory self-refresh is disabled
<6>[drm] crtc 20: hwmode: htotal 832, vtotal 520, vdisplay 480
<6>[drm] crtc 20: clock 31500 kHz framedur 13734603 linedur 26412
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling pipe A
<6>[drm] crtc 0 : v 0x5 p(286,0)@ 125.550000 -> 125.549990 [e 0 us, 0 rep]
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(825,1)@ 125.550000 -> 125.549947 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(728,2)@ 125.550000 -> 125.549924 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(22,4)@ 125.550000 -> 125.549893 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-461,-38)@ 125.570000 -> 125.571018 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=2, hw=2 hw_last=0
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(444,128)@ 125.570000 -> 125.566605 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=0, hw=2 hw_last=2
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(552,130)@ 125.570000 -> 125.566548 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=0, hw=2 hw_last=2
eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-482,-38)@ 125.580000 -> 125.581018 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=1, hw=3 hw_last=2
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(700,119)@ 125.590000 -> 125.586834 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=0, hw=3 hw_last=3
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [ENCODER:25:LVDS-25]
encoder's enabled state mismatch (expected 0, found 1)

WARNING: at intel_display.c:12709
<6>[drm] [ENCODER:29:DAC-29]
<6>[drm] [CRTC:20]
<6>[drm] Clearing atomic state 87278de0
<6>[drm] Freeing atomic state 87278de0
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(230,122)@ 125.590000 -> 125.586770 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=0, hw=3 hw_last=3enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-248,-38)@ 125.590000 -> 125.591011 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=1, hw=4 hw_last=3
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(-771,-36)@ 125.590000 -> 125.590975 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=0, hw=4 hw_last=4
<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
<6>[drm] CRT not detected via DDC:0x50 [no valid EDID found]
<6>[drm] starting load-detect on CRT
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(303,410)@ 125.610000 -> 125.599161 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=0, hw=4 hw_last=4eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-485,-38)@ 125.610000 -> 125.611019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=1, hw=5 hw_last=4
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(-594,-8)@ 125.610000 -> 125.610230 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=0, hw=5 hw_last=5
<6>[drm] [CONNECTOR:28:VGA-1], [ENCODER:29:DAC-29]
<6>[drm] Allocated atomic state 87278de0
<6>[drm] Added [CONNECTOR:28] 87278f50 state to 87278de0
<6>[drm] Added [CRTC:20] 87271f00 state to 87278de0
<6>[drm] 87279850: FB ID: 31 (2)
<6>[drm] Added [PLANE:18] 872723a8 state to 87278de0
<6>[drm] Link plane state 872723a8 to [NOCRTC]
<6>[drm] 87279850: FB ID: 31 (3)
<6>[drm] Set [NOFB] for plane state 872723a8
<6>[drm] checking 87278de0
<6>[drm] [CRTC:20] enable changed
<6>[drm] Updating routing for [CONNECTOR:28:VGA-1]
<6>[drm] Disabling [CONNECTOR:28:VGA-1]
<6>[drm] [CRTC:20] active changed
<6>[drm] [CRTC:20] needs all connectors, enable: n, active: n
<6>[drm] Adding all current connectors for [CRTC:20] to 87278de0
<6>[drm] State 87278de0 has 0 connectors for [CRTC:20]
WARN_ON(!connector_state->crtc)
WARNING: at intel_display.c:12132
<6>[drm] [CRTC:20] has [PLANE:18] with fb -1
<6>[drm] [PLANE:18] visible 1 -> 0, off 1, on 0, ms 1
<6>[drm] commiting 87278de0
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(-460,-3)@ 125.610000 -> 125.610093 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=0, hw=5 hw_last=5
eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-489,-38)@ 125.620000 -> 125.621019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=1, hw=6 hw_last=5
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(153,74)@ 125.630000 -> 125.628040 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=0, hw=6 hw_last=6
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(238,75)@ 125.630000 -> 125.628011 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=0, hw=6 hw_last=6eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-492,-38)@ 125.640000 -> 125.641019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=1, hw=7 hw_last=6
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(577,195)@ 125.640000 -> 125.634831 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=8, diff=0, hw=7 hw_last=7
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x5 p(401,196)@ 125.640000 -> 125.634810 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=8, diff=0, hw=7 hw_last=7
leave drm_vblank_off
<6>[drm] disabling pipe A
<<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [ENCODER:25:LVDS-25]
encoder's enabled state mismatch (expected 0, found 1)

WARNING: at intel_display.c:12709
<6>[drm] [ENCODER:29:DAC-29]
<6>[drm] [CRTC:20]
<6>[drm] Clearing atomic state 87278de0
<6>[drm] 87279850: FB ID: 31 (2)
<6>[drm] Freeing atomic state 87278de0
<6>[drm] 87279850: FB ID: 0 (1)
<6>[drm] disabling always-on
<6>[drm] [CONNECTOR:28:VGA-1] disconnected
<6>[drm]
<6>[drm] connector 24 enabled? yes
<6>[drm] connector 28 enabled? no
WARN_ON(!encoder->crtc)
WARNING: at intel_fbdev.c:415
<6>[drm] connector LVDS-1 has no encoder or crtc, skipping
<6>[drm] connector VGA-1 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 0, detected: 1
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 24
<6>[drm] looking for preferred mode on connector 24 0
<6>[drm] found mode 1024x600
<6>[drm] picking CRTCs for 4096x4096 config
<6>[drm] desired mode 1024x600 set on crtc 23 (0,0)
<6>[drm] no BIOS fb, allocating a new one
K : Process - forced terminate PID: 0000001D [i915]
K : Page fault
K : EAX : 00000001 EBX : 00000000 ECX : 00000000
K : EDX : 9C000005 ESI : 00000000 EDI : 01000001
K : EBP : 8726AB4C EIP : 873FA991 ESP : 8726AA98
K : Flags : 00011202 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 873FA991 [ESP+04]: 00000008 [ESP+08]: 00011202
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 00000000
K : [ESP+24]: 00000001 [ESP+28]: 01000001 [ESP+32]: 00000000

Kopa
Возьми самую свежую сборку и проверь драйвер на Dell. На Asus попробуй запустить с -v LVDS-1:1024x600
http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-4.7z

лог Dell

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6127
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295061000 Hz
K : Attach Interrupt 1 Handler 80039DFC
K : IRQ1 return code 80062E24
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: RTL8106e
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 8FFFF000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : driver /sys/drivers/usbhid.sys mapped to 90101000
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80827E50 port 4 status 0103 change 10
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Attach Interrupt 11 Handler 80AE8D28
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
IP address 172.26.42.61 assigned to network interface 1 by DHCP
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90229000

i915 v4.4.1 debug-4 build Feb 2 2016 10:38:47
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 9010f000 131072 bytes
cmdline -v HDMI-A-1:1366x768
i915.cmdline_mode =HDMI-A-1:1366x768

LOG: i915 v4.4.1 debug-4 build Feb 2 2016 10:38:47
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902F8460
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1366x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901161b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,105)@ 173.987694 -> 173.985490 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90117a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901192a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90122cc0
<6>[drm] 90122c30: FB ID: 50 (1)
<6>[drm] main_fb_obj 90122cc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90136000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90122c30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] Sink OUI: 00e04c
<6>[drm] Branch OUI: 00e04c
<6>[drm] 9011c7a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 105:"1368x768" 60 85885 1368 1440 1584 1800 768 769 772 795 0x20 0x6
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1368x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1368x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90122cc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] use CRTC 901159e8 ID 21
connector: 9011d768 crtc: 0010bb00
<6>[drm] init_display_kms allocate fb name 1
connector: 9011d768 crtc: 0010bb00
leave init_cursor
leave init_cursor
init_display_kms line 523
connector: 9011d768 crtc: 0010bb00
connector: 9011d768 crtc: 0010bb00
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 00000200 EBX : 9011D768 ECX : 00000000
K : EDX : 80041FB0 ESI : 90340440 EDI : 0010BB00
K : EBP : 9010ED70 EIP : 902BDC96 ESP : 9010ED28
K : Flags : 00011006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 902BDC96 [ESP+04]: 00000008 [ESP+08]: 00011006
K : [ESP+12]: 9032D1D1 [ESP+16]: 9011D768 [ESP+20]: 0010BB00
K : [ESP+24]: 00000000 [ESP+28]: 02000000 [ESP+32]: 9011D798
K : Process - forced terminate PID: 00000002 [OS]
K : Page fault
K : EAX : 0010BB00 EBX : 000000F8 ECX : 000000F8
K : EDX : 00000042 ESI : 80827028 EDI : 8001D411
K : EBP : 8003D3ED EIP : 902BCCBF ESP : 80821D88
K : Flags : 00210006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 902BCCBF [ESP+04]: 00000008 [ESP+08]: 00210006
K : [ESP+12]: 00000000 [ESP+16]: 8003D3ED [ESP+20]: 000000F8
K : [ESP+24]: 80827028 [ESP+28]: 8003A227 [ESP+32]: 80827028

Лог Asus

Spoiler:

K : kernel SVN r6127
K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80038E74
K : Set IDE IRQ14 return code 80062E10
K : Attach Interrupt 15 Handler 80038E74
K : Set IDE IRQ15 return code 80062E24
K : driver /rd/1/drivers/vidintel.sys mapped to 80B3E000
Intel videocard detected, PciId=8086:2592, which is known
K : driver /sys/drivers/UHCI.sys mapped to 80B42000
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 7 Handler 80B426C1
K : UHCI 80B45830 connect status changed, 009B/0091
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 3 Handler 80B426C1
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80B426C1
K : UHCI 80B49830 connect status changed, 009B/0091
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80B426C1
K : UHCI 80B4B830 connect status changed, 0093/0091
K : Attach Interrupt 1 Handler 80039DFC
K : IRQ1 return code 80062E88
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80C57000
K : UHCI 80B45830 status 0280/0093
K : reset done
K : UHCI 80B49830 status 0280/0093
K : reset done
K : UHCI 80B4B830 status 0280/0093
K : reset done
K : UHCI 80B45830 status 0095
K : UHCI 80B49830 status 0095
K : UHCI 80B4B830 status 0095
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 40 00 FF 07 05 02 02 40 00 FF
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 40 00 00 07 05 82 02 40 00 00
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 80C60000
K : USB mass storage device detected
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 1 logical unit(s)
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 2 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : Command 03 failed
K : sector size is 512, last sector is 60437491
K : Command 03 failed
K : Command 03 failed
K : media not ready
K : peripheral device type is 00
K : direct-access mass storage device detected
K : TD failed:
K : 007B5F94 394007FF 00E90169 007BCD90
K : 00000001 80C606F9 80828EE0 80C5CFA4
K : pipe: 007B4192 007B51E4
K : error 4 after -2134505735 bytes in data stage
K : config descriptor: 09 02 49 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 A7 00 81 00 04 01 00 00 01 00 1B 24 04 01 04 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 A0 00 78 00 00 CA 08 00 00 CA 08 00 00 96 00 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 02 01 B0 00 90 00 00 9A 0B 00 00 9A 0B 00 00 C6 00 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 03 01 40 01 F0 00 00 28 23 00 00 28 23 00 00 58 02 00 2A 2C 0A 00 01 2A 2C 0A 00 1E 24 05 04 01 60 01 20 01 00 68 2E 00 00 68 2E 00 00 18 03 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 FF 03 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 FF 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 FF 02 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Attach Interrupt 12 Handler 80C57546
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80D6D000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80DB5000
Detecting hardware...
Loading INTEL_HDA
K : driver /sys/drivers/INTEL_HDA.sys mapped to 80DBC000
HDA test version 019
detect hardware...
Intel 82801F
PCI command 00000006
PCI status 00000010
lower mmio base F7EB8004
upper mmio base 00000000
GCAP = 00004401
codec_mask = 00000001
create primary buffer ...done
K : Attach Interrupt 5 Handler 80DBCA34
L: /SYS/@SS Param: ASSM
codec probed OK
CAd = 0
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80DD8000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 100 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
Setup FG nodes = start_nid:total_nodes = 1:1
L: /SYS/SEARCHAP Param:
FG type = 1
Setup FG nodes = start_nid:total_nodes = 2:25
Realtek ALC662
Pin Nid = 14
Pin Control = 00000020
Pin Capabilities = 0001003C
Pin def_cfg = 99130110
Pin Amp Out caps = 80000000
AUD_OUT found 2
UNMUTE OUT: NID=2
Amp val = 40:3
CONNECT: NID=C
IDX=0
UNMUTE OUT: NID=14
Enable EAPD: NID=14
UNMUTE OUT: NID=14
Enable EAPD: NID=14
Pin Nid = 1B
Pin Control = 00000020
Pin Capabilities = 0000173C
Pin def_cfg = 0121401F
Pin Amp Out caps = 80000000
AUD_OUT found 2
UNMUTE OUT: NID=2
Amp val = 40:3
CONNECT: NID=C
IDX=0
CONNECT: NID=1B
IDX=0
UNMUTE OUT: NID=1B
UNMUTE OUT: NID=1B
val=2
val=2
hda_codec_setup_stream: NID=2
stream=1
channel=0
format=11
Normal mode !
NewVolume: 0000095B
MinVolume: 000012C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 87385000

i915 v4.4.1 debug-4 build Feb 2 2016 10:38:47
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 24 bytes
os_mmap 8726b000 131072 bytes
cmdline -v LVDS-1:1024x600
i915.cmdline_mode =LVDS-1:1024x600

LOG: i915 v4.4.1 debug-4 build Feb 2 2016 10:38:47
PCI device 8086:2641 bus:0 devfn:f8
PCI device 8086:2592 bus:0 devfn:10
PCI device 8086:2590 bus:0 devfn:0
<6>SMBIOS 2.5 present.
<7>DMI: ASUSTeK Computer INC. 900/900, BIOS 1006 03/03/2009
<6>[drm] device 8086:2592
<6>[drm]
<6>[drm] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found.
Info intel_gmch_probe Intel 915GM Chipset
Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
Info intel_gtt_stolen_size detected 8192K stolen memory
<6>[drm] Memory usable by graphics device = 256M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 8M
<6>[drm] ppgtt mode: 0
<6>[drm] enable MCHBAR
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 100000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT ALVISO d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is static
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] VBT initial LVDS value 40000300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] No PSR BDB found.
<6>[drm] GTT within stolen memory at 0x3ffc0000-0x3fffffff
<6>[drm] Stolen memory adjusted to 0x3f800000-0x3ffbffff
<6>[drm] Memory reserved for graphics device: 7936K, usable: 7936K
<6>[drm] Adjust framebuffer size to match reserved memory
new fbsize 7MB
<6>[drm] enabling always-on
<6>[drm] irq=5
K : Attach Interrupt 5 Handler 87454460
<6>[drm] 2 display pipes available.
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe A sprite A init failed: -19
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe B sprite B init failed: -19
<6>[drm] Current CD clock rate: 190000 kHz
<6>[drm] Max CD clock rate: 190000 kHz
<6>[drm] Max dotclock rate: 342000 kHz
<6>[drm] cmdline mode for connector LVDS-1 1024x600@60Hz
i915_driver_thread
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus panel] NAK on first message, retry
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus panel
<6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] detected single-link lvds configuration
<6>[drm] Connector LVDS-1 backlight initialized, enabled, brightness 2374880/3784965
<6>[drm] [CRTC:20] hw state readout: disabled
<6>[drm] [CRTC:23] hw state readout: enabled
<6>[drm] [ENCODER:25:LVDS-25] hw state readout: enabled, pipe B
<6>[drm] [ENCODER:29:DAC-29] hw state readout: disabled, pipe A
<6>[drm] [CONNECTOR:24:LVDS-1] hw state readout: enabled
<6>[drm] [CONNECTOR:28:VGA-1] hw state readout: disabled
<6>[drm] Set [MODE:1024x600] for CRTC state 87273480
<6>[drm] crtc 23: hwmode: htotal 1344, vtotal 625, vdisplay 600
<6>[drm] crtc 23: clock 48000 kHz framedur 17500000 linedur 28000
<6>[drm] [CRTC:20][setup_hw_state] config 87271f08 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] crtc 1 : v 0x5 p(68,138)@ 177.490000 -> 177.486134 [e 0 us, 0 rep]
<6>[drm] [CRTC:23] wrong plane connection detected!
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 1, ret: 0
<6>[drm] crtc 1 : v 0x5 p(210,139)@ 177.490000 -> 177.486103 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=1, diff=0, hw=10630 hw_last=10630
enter drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-445,-23)@ 177.500000 -> 177.500653 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=1, diff=1, hw=10631 hw_last=10630
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-858,-23)@ 177.510000 -> 177.510661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=2, diff=1, hw=10632 hw_last=10631
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] set backlight PWM = 0
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-846,-23)@ 177.530000 -> 177.530661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=3, diff=1, hw=10633 hw_last=10632
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-863,-23)@ 177.550000 -> 177.550661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=4, diff=1, hw=10634 hw_last=10633
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-856,-23)@ 177.560000 -> 177.560661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=5, diff=1, hw=10635 hw_last=10634
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-875,-23)@ 177.580000 -> 177.580662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=6, diff=1, hw=10636 hw_last=10635
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-865,-23)@ 177.600000 -> 177.600662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=7, diff=1, hw=10637 hw_last=10636
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-861,-23)@ 177.620000 -> 177.620661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=8, diff=1, hw=10638 hw_last=10637
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-845,-23)@ 177.630000 -> 177.630661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=9, diff=1, hw=10639 hw_last=10638
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-818,-23)@ 177.650000 -> 177.650661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=10, diff=1, hw=10640 hw_last=10639
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-863,-23)@ 177.670000 -> 177.670661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=11, diff=1, hw=10641 hw_last=10640
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-863,-23)@ 177.680000 -> 177.680661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=12, diff=1, hw=10642 hw_last=10641
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-874,-23)@ 177.700000 -> 177.700662 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=13, diff=1, hw=10643 hw_last=10642
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-849,-23)@ 177.720000 -> 177.720661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=14, diff=1, hw=10644 hw_last=10643
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
enter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-858,-23)@ 177.730000 -> 177.730661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=15, diff=1, hw=10645 hw_last=10644
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
eenter drm_handle_vblank
<6>[drm] crtc 1 : v 0x7 p(-850,-23)@ 177.750000 -> 177.750661 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=16, diff=1, hw=10646 hw_last=10645
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblankenter drm_vblank_off
<6>[drm] crtc 1 : v 0x5 p(652,174)@ 177.760000 -> 177.755114 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 1: current=17, diff=0, hw=10646 hw_last=10646
leave drm_vblank_off
<6>[drm] disabling pipe B
<6>[drm] disabling pfit, current: 0x80002668
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] [CRTC:23] hw state adjusted, was enabled, now disabled
<6>[drm] 87276300: blob ID: 30 (1)
<6>[drm] Set [NOMODE] for CRTC state 87273480
<6>[drm] [CRTC:23][setup_hw_state] config 87273480 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1024x600" 57 48000 1024 1044 1054 1344 600 602 605 625 0x40 0x5
<6>[drm] crtc timings: 48000 1024 1044 1054 1344 600 602 605 625, type: 0x40 flags: 0x5
<6>[drm] port clock: 48000
<6>[drm] pipe src size: 800x600
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x98086000, dpll_md: 0x0, fp0: 0x21305, fp1: 0x31108
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:21 plane: 1.0 idx: 2 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:22 plane: 1.2 idx: 3 disabled, scaler_id = 0
<6>[drm] disabling always-on
<6>[drm] clearing unused GTT space: [0, ffff000]
<6>[drm] fake context support initialized
<6>[drm] creating stolen object: size=20000
<6>[drm] offset=0x0, size=131072
<6>[drm] Current CD clock rate: 190000 kHz
<6>[drm] pipe A not active or no fb, skipping
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] no active fbs found, not using BIOS config
<6>[drm] [CONNECTOR:24:LVDS-1]
<6>[drm] [CONNECTOR:24:LVDS-1]
<6>[drm] [CONNECTOR:24:LVDS-1] probed modes :
<6>[drm] Modeline 30:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] Modeline 31:"1024x600" 60 48924 1024 1064 1168 1312 600 601 604 622 0x20 0x6
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [CONNECTOR:28:VGA-1] force=1
<6>[drm] enabling always-on
<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus vga] NAK on first message, retry<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
<6>[drm] CRT not detected via DDC:0x50 [no valid EDID found]
<6>[drm] [CONNECTOR:28:VGA-1], [ENCODER:29:DAC-29]
<6>[drm] Allocated atomic state 87278eb0
<6>[drm] Added [CONNECTOR:28] 87279040 state to 87278eb0
<6>[drm] Added [CRTC:20] 87279058 state to 87278eb0
<6>[drm] creating tmp fb for load-detection
<6>[drm] Added [PLANE:18] 872799b0 state to 87278eb0
<6>[drm] Link plane state 872799b0 to [CRTC:20]
<6>[drm] 87279920: FB ID: 32 (1)
<6>[drm] Set [FB:32] for plane state 872799b0
<6>[drm] checking 87278eb0
<6>[drm] [CRTC:20] mode changed
<6>[drm] [CRTC:20] enable changed
<6>[drm] Updating routing for [CONNECTOR:28:VGA-1]
<6>[drm] [CONNECTOR:28:VGA-1] keeps [ENCODER:29:DAC-29], now on [CRTC:20]
<6>[drm] [CRTC:20] active changed
<6>[drm] [CRTC:20] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:20] to 87278eb0
<6>[drm] State 87278eb0 has 1 connectors for [CRTC:20]
<6>[drm] Adding all current connectors for [CRTC:20] to 87278eb0
<6>[drm] [CONNECTOR:28:VGA-1] checking for sink bpp constrains
<6>[drm] hw max bpp: 24, pipe bpp: 24, dithering: 0
<6>[drm] mismatch in base.adjusted_mode.crtc_hdisplay (expected 0, found 640)
<6>[drm] mismatch in base.adjusted_mode.crtc_htotal (expected 0, found 832)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_start (expected 0, found 640)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_end (expected 0, found 832)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_start (expected 0, found 664)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_end (expected 0, found 704)
<6>[drm] mismatch in base.adjusted_mode.crtc_vdisplay (expected 0, found 480)
<6>[drm] mismatch in base.adjusted_mode.crtc_vtotal (expected 0, found 520)
<6>[drm] mismatch in base.adjusted_mode.crtc_vblank_start (expected 0, found 480)
<6>[drm] mismatch in base.adjusted_mode.crtc_vblank_end (expected 0, found 520)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_start (expected 0, found 489)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_end (expected 0, found 491)
<6>[drm] mismatch in pixel_multiplier (expected 0, found 1)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NHSYNC) (expected 0, found 2)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NVSYNC) (expected 0, found
<6>[drm] mismatch in base.adjusted_mode.crtc_clock (expected 0, found 31500)
<6>[drm] mismatch in port_clock (expected 0, found 31500)
<6>[drm] [CRTC:20][modeset] config 87279058 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 24, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"640x480" 0 31500 640 664 704 832 480 489 491 520 0x10 0xa
<6>[drm] crtc timings: 31500 640 664 704 832 480 489 491 520, type: 0x10 flags: 0xa
<6>[drm] port clock: 31500
<6>[drm] pipe src size: 640x480
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] dpll_hw_state: dpll: 0x0, dpll_md: 0x0, fp0: 0x0, fp1: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:19 plane: 0.1 idx: 1 disabled, scaler_id = 0
WARN_ON(!connector_state->crtc)
WARNING: at intel_display.c:12132
WARN_ON(was_visible)
WARNING: at intel_display.c:11680
<6>[drm] [CRTC:20] has [PLANE:18] with fb 32
<6>[drm] [PLANE:18] visible 0 -> 1, off 0, on 1, ms 1
<6>[drm] commiting 87278eb0
<3>Architecture has no drm_cache.c support

WARNING: at ../drm_cache.c:119
<6>[drm] memory self-refresh is disabled
<6>[drm] crtc 20: hwmode: htotal 832, vtotal 520, vdisplay 480
<6>[drm] crtc 20: clock 31500 kHz framedur 13734603 linedur 26412
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling pipe A
<6>[drm] crtc 0 : v 0x5 p(289,0)@ 177.810000 -> 177.809990 [e 0 us, 0 rep]
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(807,1)@ 177.810000 -> 177.809947 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(711,2)@ 177.810000 -> 177.809924 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(818,3)@ 177.810000 -> 177.809894 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=0, hw=0 hw_last=0enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-373,-38)@ 177.830000 -> 177.831015 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=2, hw=2 hw_last=0
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(-153,-37)@ 177.830000 -> 177.830982 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=0, hw=2 hw_last=2
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO entries required for mode: 10
<6>[drm] FIFO watermark level: 19
<6>[drm] FIFO watermarks - A: 26, B: 19
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 19, C: 2, SR 1
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(-768,-34)@ 177.830000 -> 177.830922 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=0, hw=2 hw_last=2
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-506,-38)@ 177.840000 -> 177.841019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=3, diff=1, hw=3 hw_last=2
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(-320,-37)@ 177.840000 -> 177.840987 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=0, hw=3 hw_last=3
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [ENCODER:25:LVDS-25]
encoder's enabled state mismatch (expected 0, found 1)

WARNING: at intel_display.c:12709
<6>[drm] [ENCODER:29:DAC-29]
<6>[drm] [CRTC:20]
<6>[drm] Clearing atomic state 87278eb0
<6>[drm] Freeing atomic state 87278eb0
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(-691,-34)@ 177.840000 -> 177.840919 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=0, hw=3 hw_last=3
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-508,-38)@ 177.850000 -> 177.851019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=4, diff=1, hw=4 hw_last=3
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(-351,-37)@ 177.850000 -> 177.850988 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=0, hw=4 hw_last=4
<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] GMBUS [i915 gmbus vga] NAK on first message, retry
<<6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 w(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
<6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
<6>[drm] drm: skipping non-existent adapter i915 gmbus vga
<6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
<6>[drm] CRT not detected via DDC:0x50 [no valid EDID found]
<6>[drm] starting load-detect on CRT
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(318,410)@ 177.870000 -> 177.859160 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=0, hw=4 hw_last=4eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-492,-38)@ 177.870000 -> 177.871019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=5, diff=1, hw=5 hw_last=4
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(118,68)@ 177.870000 -> 177.868200 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=0, hw=5 hw_last=5
<6>[drm] [CONNECTOR:28:VGA-1], [ENCODER:29:DAC-29]
<6>[drm] Allocated atomic state 87278eb0
<6>[drm] Added [CONNECTOR:28] 87279020 state to 87278eb0
<6>[drm] Added [CRTC:20] 87271f08 state to 87278eb0
<6>[drm] 87279920: FB ID: 32 (2)
<6>[drm] Added [PLANE:18] 872723b0 state to 87278eb0
<6>[drm] Link plane state 872723b0 to [NOCRTC]
<6>[drm] 87279920: FB ID: 32 (3)
<6>[drm] Set [NOFB] for plane state 872723b0
<6>[drm] checking 87278eb0
<6>[drm] [CRTC:20] enable changed
<6>[drm] Updating routing for [CONNECTOR:28:VGA-1]
<6>[drm] Disabling [CONNECTOR:28:VGA-1]
<6>[drm] [CRTC:20] active changed
<6>[drm] [CRTC:20] needs all connectors, enable: n, active: n
<6>[drm] Adding all current connectors for [CRTC:20] to 87278eb0
<6>[drm] State 87278eb0 has 0 connectors for [CRTC:20]
WARN_ON(!connector_state->crtc)
WARNING: at intel_display.c:12132
<6>[drm] [CRTC:20] has [PLANE:18] with fb -1
<6>[drm] [PLANE:18] visible 1 -> 0, off 1, on 0, ms 1
<6>[drm] commiting 87278eb0
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(488,72)@ 177.870000 -> 177.868082 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=0, hw=5 hw_last=5
eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-451,-38)@ 177.880000 -> 177.881018 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=6, diff=1, hw=6 hw_last=5
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(259,74)@ 177.890000 -> 177.888037 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=0, hw=6 hw_last=6
<6>[drm] memory self-refresh is disabled
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(313,75)@ 177.890000 -> 177.888009 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=0, hw=6 hw_last=6eenter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(-484,-38)@ 177.900000 -> 177.901019 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=7, diff=1, hw=7 hw_last=6
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank<<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(368,311)@ 177.910000 -> 177.901773 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=8, diff=0, hw=7 hw_last=7
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x5 p(195,312)@ 177.910000 -> 177.901753 [e 0 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=8, diff=0, hw=7 hw_last=7
leave drm_vblank_off
<6>[drm] disabling pipe A<<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] [CONNECTOR:28:VGA-1]
<6>[drm] [ENCODER:25:LVDS-25]
encoder's enabled state mismatch (expected 0, found 1)

WARNING: at intel_display.c:12709
<6>[drm] [ENCODER:29:DAC-29]
<6>[drm] [CRTC:20]
<6>[drm] Clearing atomic state 87278eb0
<6>[drm] 87279920: FB ID: 32 (2)
<6>[drm] Freeing atomic state 87278eb0
<6>[drm] 87279920: FB ID: 0 (1)
<6>[drm] disabling always-on
<6>[drm] [CONNECTOR:28:VGA-1] disconnected
<6>[drm]
<6>[drm] connector 24 enabled? yes
<6>[drm] connector 28 enabled? no
WARN_ON(!encoder->crtc)
WARNING: at intel_fbdev.c:415
<6>[drm] connector LVDS-1 has no encoder or crtc, skipping
<6>[drm] connector VGA-1 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 0, detected: 1
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 24
<6>[drm] found mode 1024x600
<6>[drm] picking CRTCs for 4096x4096 config
<6>[drm] desired mode 1024x600 set on crtc 23 (0,0)
<6>[drm] no BIOS fb, allocating a new one
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 00000001 EBX : 00000000 ECX : 00000000
K : EDX : 9C000005 ESI : 00000000 EDI : 01000001
K : EBP : 8726AB4C EIP : 87392991 ESP : 8726AA98
K : Flags : 00011202 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 87392991 [ESP+04]: 00000008 [ESP+08]: 00011202
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 00000000
K : [ESP+24]: 00000001 [ESP+28]: 01000001 [ESP+32]: 00000000

Kopa
Проверь на DELL с переключением монитора. Для Asus пока ничего нет.
http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-5.7z

Внешний монитор переключился и вывел рабочий стол Колибри!
Лог, правда, стандартно не сохранился. Сделаю повторно.

Kopa
Отлично. Значит я правильно нашёл ошибку. Спасибо за тестирование.
С Asus всё сложнее. В драйвере запутанный механизм выбора рабочей конфигурации который почему-то не хочет использовать существующий экранный буфер. Я буду делать в ядре поддержку пользовательских фреймбуферов для полноэкранных режимов и переключения страниц. Тогда проблема решится сама.

Получившийся лог.

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6127
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295064000 Hz
K : Attach Interrupt 1 Handler 80039DFC
K : IRQ1 return code 80062E24
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: RTL8106e
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 8FFFF000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : driver /sys/drivers/usbhid.sys mapped to 90101000
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80827E50 port 4 status 0103 change 10
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Attach Interrupt 11 Handler 80AE8D28
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
IP address 172.26.42.61 assigned to network interface 1 by DHCP
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90229000

i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 9010f000 131072 bytes
cmdline -v HDMI-A-1:1360x768
i915.cmdline_mode =HDMI-A-1:1360x768

LOG: i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902F8560
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1360x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901161b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,273)@ 158.778827 -> 158.773095 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90117a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901192a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90122cc0
<6>[drm] 90122c30: FB ID: 50 (1)
<6>[drm] main_fb_obj 90122cc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90136000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90122c30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] Sink OUI: 00e04c
<6>[drm] Branch OUI: 00e04c
<6>[drm] 9011c7a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 105:"1360x768" 60 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1360x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1360x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90122cc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
enter init_display_kms
enter choose_config
enter get_cmdline_connector
enter get_possible_crtc
<6>[drm] use CRTC 901159e8 ID 21
leave get_possible_crtc
<6>[drm] check_connector connector: 9011d768 encode: 9011d190 crtc: 901159e8
choose_config connector: 9011d768 crtc: 901159e8
leave choose_config
connector: 9011d768 crtc: 901159e8
<6>[drm] init_display_kms allocate fb name 1
connector: 9011d768 crtc: 901159e8
leave init_cursor
leave init_cursor
init_display_kms line 534
connector: 9011d768 crtc: 901159e8
connector: 9011d768 crtc: 901159e8
init_display_kms line 549
init_display_kms line 551
init_display_kms line 554
init_display_kms line 556
enter set_cmdline_mode
set_cmdline_mode line 329
set_cmdline_mode line 332
enter set_mode_ex
set_mode_ex line 223
<6>[drm] Allocated atomic state 90146010
<6>[drm] 90122bc0: blob ID: 49 (1)
<6>[drm] Added [CRTC:21] 901461e0 state to 90146010
<6>[drm] checking 90146010
<6>[drm] [CRTC:21] active changed
<6>[drm] [CRTC:21] needs all connectors, enable: y, active: n
<6>[drm] Adding all current connectors for [CRTC:21] to 90146010
<6>[drm] Added [CONNECTOR:32] 901464b0 state to 90146010
<6>[drm] 90122c30: FB ID: 50 (3)
<6>[drm] Added [PLANE:18] 901464c8 state to 90146010
<6>[drm] State 90146010 has 1 connectors for [CRTC:21]
<6>[drm] Adding all current connectors for [CRTC:21] to 90146010
<6>[drm] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
<6>[drm] clamping display bpp (was 36) to EDID reported max of 18
<6>[drm] DP link computation with max lane count 2 max bw 270000 pixel clock 76300KHz
<6>[drm] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
<6>[drm] DP link bw required 137340 available 432000
<6>[drm] hw max bpp: 36, pipe bpp: 18, dithering: 1
<6>[drm] mismatch in dp_m_n (expected tu 64 gmch 2673519/8388608 link 148528/524288, found tu 64, gmch 2666878/8388608 link 148159/524288)
<6>[drm] mismatch in ips_enabled (expected 0, found 1)
<6>[drm] mismatch in ddi_pll_sel (expected 0x80000000, found 0x20000000)
<6>[drm] mismatch in dpll_hw_state.wrpll (expected 0x90280202, found 0x00000000)
<6>[drm] [CRTC:21][modeset] config 901461e0 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 1
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2666878, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] crtc timings: 76300 1366 1430 1478 1606 768 770 775 792, type: 0x48 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 1
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1024x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:21] has [PLANE:18] with fb 50
<6>[drm] [PLANE:18] visible 1 -> 0, off 1, on 0, ms 1
<6>[drm] commiting 90146010
<6>[drm]
<6>[drm] set backlight PWM = 0
<6>[drm] cpu backlight was enabled, disabling
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x7 p(0,-15)@ 159.458733 -> 159.459048 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=131, hw=10353 hw_last=10222
leave drm_vblank_off
<6>[drm] disabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] Turn eDP port A panel power off
<6>[drm] Wait for panel power off time
<6>[drm] mask b0000000 value 00000000 status 80000008 control abcd0000
<6>[drm] Wait complete
<6>[drm] disable WRPLL 1 (active 1, on? 1) for crtc 21
<6>[drm] disabling WRPLL 1
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76300 kHz framedur 16670406 linedur 21048
<6>[drm] disabling display
<6>[drm] Requesting to disable the power well
<6>[drm] disabling always-on
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:40:TMDS-40]
encoder's enabled state mismatch (expected 1, found 0)

WARNING: at intel_display.c:12709
<6>[drm] [ENCODER:43:TMDS-43]
<6>[drm] [ENCODER:45:DP MST-45]
<6>[drm] [ENCODER:46:DP MST-46]
<6>[drm] [ENCODER:47:DP MST-47]
<6>[drm] 90122bc0: blob ID: 49 (2)
<6>[drm] [CRTC:21]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] SPLL
<6>[drm] Clearing atomic state 90146010
<6>[drm] 90122c30: FB ID: 50 (4)
<6>[drm] Freeing atomic state 90146010
set_mode_ex line 231
set_mode_ex line 233
set_mode_ex line 237
set_mode_ex line 254
set_mode_ex line 266
set_mode_ex line 268
<6>[drm] set mode 1360x768: crtc 21 connector HDMI-A-1
monitor: MST model 30 serial number 1
set_mode_ex line 278
<6>[drm] use framebuffer 90122c30 1360x768 pitch 5632 format 34325258
set_mode_ex line 281
set_mode_ex line 289
<6>[drm] Allocated atomic state 90146010
<6>[drm] 90122bc0: blob ID: 49 (1)
<6>[drm] Added [CRTC:21] 901161b8 state to 90146010
<6>[drm] 90122c30: FB ID: 50 (3)
<6>[drm] Added [PLANE:18] 90146140 state to 90146010
<6>[drm] 90122bc0: blob ID: 49 (2)
<6>[drm] Set [MODE:1360x768] for CRTC state 901161b8
<6>[drm] Link plane state 90146140 to [CRTC:21]
<6>[drm] 90122c30: FB ID: 50 (4)
<6>[drm] 90122c30: FB ID: 50 (3)
<6>[drm] Set [FB:50] for plane state 90146140
<6>[drm] Added [CONNECTOR:41] 901461c8 state to 90146010
<6>[drm] Adding all current connectors for [CRTC:21] to 90146010
<6>[drm] Added [CONNECTOR:32] 901465c0 state to 90146010
<6>[drm] Link connector state 901465c0 to [NOCRTC]
<6>[drm] Link connector state 901461c8 to [CRTC:21]
<6>[drm] checking 90146010
<6>[drm] [CRTC:21] mode changed
<6>[drm] Updating routing for [CONNECTOR:32:eDP-1]
<6>[drm] Disabling [CONNECTOR:32:eDP-1]
<6>[drm] Updating routing for [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1] using [ENCODER:40:TMDS-40] on [CRTC:21]
<6>[drm] [CRTC:21] active changed
<6>[drm] [CRTC:21] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:21] to 90146010
<6>[drm] State 90146010 has 1 connectors for [CRTC:21]
<6>[drm] Adding all current connectors for [CRTC:21] to 90146010
<6>[drm] [CONNECTOR:41:HDMI-A-1] checking for sink bpp constrains
<6>[drm] picking bpc to 12 for HDMI output
<6>[drm] forcing pipe bpc to 36 for HDMI
<6>[drm] hw max bpp: 36, pipe bpp: 36, dithering: 0
<6>[drm] mismatch in cpu_transcoder (expected 3, found 0)
<6>[drm] mismatch in has_dp_encoder (expected 1, found 0)
<6>[drm] mismatch in lane_count (expected 2, found 0)
<6>[drm] mismatch in dp_m_n (expected tu 64 gmch 2666878/8388608 link 148159/524288, found tu 0, gmch 0/0 link 0/0)
<6>[drm] mismatch in base.adjusted_mode.crtc_hdisplay (expected 1366, found 1360)
<6>[drm] mismatch in base.adjusted_mode.crtc_htotal (expected 1606, found 1776)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_start (expected 1366, found 1360)
<6>[drm] mismatch in base.adjusted_mode.crtc_hblank_end (expected 1606, found 1776)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_start (expected 1430, found 1424)
<6>[drm] mismatch in base.adjusted_mode.crtc_hsync_end (expected 1478, found 1568)
<6>[drm] mismatch in base.adjusted_mode.crtc_vtotal (expected 792, found 795)
<6>[drm] mismatch in base.adjusted_mode.crtc_vblank_end (expected 792, found 795)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_start (expected 770, found 769)
<6>[drm] mismatch in base.adjusted_mode.crtc_vsync_end (expected 775, found 772)
<6>[drm] mismatch in has_hdmi_sink (expected 0, found 1)
<6>[drm] mismatch in has_infoframe (expected 0, found 1)
<6>[drm] mismatch in has_audio (expected 0, found 1)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_PHSYNC) (expected 1, found 0)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NHSYNC) (expected 0, found 2)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_PVSYNC) (expected 0, found 4)
<6>[drm] mismatch in base.adjusted_mode.flags(DRM_MODE_FLAG_NVSYNC) (expected 8, found 0)
<6>[drm] mismatch in ips_enabled (expected 1, found 0)
<6>[drm] mismatch in pipe_bpp (expected 18, found 36)
<6>[drm] mismatch in base.adjusted_mode.crtc_clock (expected 76300, found 84740)
<6>[drm] mismatch in port_clock (expected 270000, found 127110)
<6>[drm] [CRTC:21][modeset] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 36, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 1, infoframes: 1
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1360x768" 0 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1360x768" 0 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] crtc timings: 84740 1360 1424 1568 1776 768 769 772 795, type: 0x20 flags: 0x6
<6>[drm] port clock: 127110
<6>[drm] pipe src size: 1360x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1360x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] Added [CRTC:25] 901465d8 state to 90146010
<6>[drm] Added [CRTC:29] 901468a8 state to 90146010
<6>[drm] [CRTC:21] has [PLANE:18] with fb 50
<6>[drm] [PLANE:18] visible 0 -> 1, off 0, on 1, ms 1
<6>[drm] CRTC:21 allocated WRPLL 1
<6>[drm] using WRPLL 1 for pipe A
<6>[drm] commiting 90146010
<6>[drm] crtc 21: hwmode: htotal 1776, vtotal 795, vdisplay 768
<6>[drm] crtc 21: clock 84740 kHz framedur 16661789 linedur 20958
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] Enabling power well
<6>[drm] enable WRPLL 1 (active 0, on? 0) for crtc 21
<6>[drm] enabling WRPLL 1
<6>[drm] enabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] crtc 0: Noisy timestamp 22 us > 20 us [3 reps].
<6>[drm] crtc 0 : v 0x5 p(0,2)@ 159.538925 -> 159.538883 [e 22 us, 3 rep]
<6>[drm] ELD on [CONNECTOR:41:HDMI-A-1], [ENCODER:40:TMDS-40]
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(0,-25)@ 159.538982 -> 159.539506 [e 19 us, 1 rep]
<6>[drm] crtc 0 : v 0x7 p(0,-25)@ 159.538988 -> 159.539512 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=1, hw=10355 hw_last=10354
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-25)@ 159.538998 -> 159.539522 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=10355 hw_last=10355
enter drm_handle_vblank
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(0,-23)@ 159.539034 -> 159.539516 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=10355 hw_last=10355
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-25)@ 159.555660 -> 159.556184 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=1, hw=10356 hw_last=10355
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-24)@ 159.555682 -> 159.556185 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=0, hw=10356 hw_last=10356
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:40:TMDS-40]
<6>[drm] [ENCODER:43:TMDS-43]
<6>[drm] [ENCODER:45:DP MST-45]
<6>[drm] [ENCODER:46:DP MST-46]
<6>[drm] [ENCODER:47:DP MST-47]
<6>[drm] 90122bc0: blob ID: 49 (1)
<6>[drm] [CRTC:21]
DRM Errormismatch in has_audio (expected 1, found 0)
pipe state doesn't match!

WARNING: at intel_display.c:12787
<6>[drm] [CRTC:21][hw state] config 901461e0 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 36, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 1
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 1360 0 0 0 768 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x6
<6>[drm] crtc timings: 84705 1360 1424 1568 1776 768 769 772 795, type: 0x0 flags: 0x6
<6>[drm] port clock: 127058
<6>[drm] pipe src size: 1360x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0xb0180611 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1360x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 1360x768 dst (0, 0) 1360x768
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:21][sw state] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 36, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 1, infoframes: 1
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1360x768" 0 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1360x768" 0 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] crtc timings: 84740 1360 1424 1568 1776 768 769 772 795, type: 0x20 flags: 0x6
<6>[drm] port clock: 127110
<6>[drm] pipe src size: 1360x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0xb0180611 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1360x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 1360x768 dst (0, 0) 1360x768
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] SPLL
<6>[drm] Clearing atomic state 90146010
<6>[drm] 90122c30: FB ID: 50 (4)
<6>[drm] Freeing atomic state 90146010
<6>[drm] 90122c30: FB ID: 50 (3)
set_mode_ex line 291
<6>[drm] new mode 1360 x 768 pitch 5632
set_mode_ex line 317
leave set_mode_ex
set_cmdline_mode line 335
leave set_cmdline_mode
init_display_kms line 562
Set DISPLAY handler
<6>[drm] Enabling RC6 states: RC6 off
<6>[drm] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz

Спасибо!

Kopa
Пожалуйста сделай ещё тест с опцией --rc6 1 Это режим энергосбережения и доступен только на ноутбуках.

Готово

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6127
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295055000 Hz
K : Attach Interrupt 1 Handler 80039DFC
K : IRQ1 return code 80062E24
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: RTL8106e
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
K : final: hub 80827E50 port 1 status 0101 change 01
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : driver /sys/drivers/usbhid.sys mapped to 8FFFF000
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 00824002 08085002 41010000 008251E0
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 90001000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : final: hub 80827E50 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : Attach Interrupt 11 Handler 80AE8D28
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
DHCP failed
IP address 169.254.93.107 assigned to network interface 1 through Link-Local
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 9022D000

i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 16 bytes
os_mmap 90113000 131072 bytes
cmdline --rc6 1
i915.rc6 = 1

LOG: i915 v4.4.1 debug-5 build Feb 2 2016 18:59:25
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902FC560
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 9011a1a8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,749)@ 129.711056 -> 129.695330 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 9011a1a8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 9011ba78 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 9011d290 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90126cb0
<6>[drm] 90126c20: FB ID: 50 (1)
<6>[drm] main_fb_obj 90126cb0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90137000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90126c20: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] Sink OUI: 00e04c
<6>[drm] Branch OUI: 00e04c
<6>[drm] 90120790: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] looking for preferred mode on connector 41 0
<6>[drm] found mode 1920x1080
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1920x1080 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90126cb0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
enter init_display_kms
enter choose_config
<6>[drm] check_connector connector: 9011e8e0 encode: 9011e2d8 crtc: 901199d8
choose_config connector: 9011e8e0 crtc: 901199d8
leave choose_config
connector: 9011e8e0 crtc: 901199d8
<6>[drm] init_display_kms allocate fb name 1
connector: 9011e8e0 crtc: 901199d8
leave init_cursor
leave init_cursor
init_display_kms line 534
connector: 9011e8e0 crtc: 901199d8
connector: 9011e8e0 crtc: 901199d8
init_display_kms line 549
init_display_kms line 551
init_display_kms line 554
init_display_kms line 556
init_display_kms line 562
init_display_kms line 581
<6>[drm] Manufacturer: SDC Model 5441 Serial Number 0
<6>[drm] set mode 1366 768: crtc 21 connector eDP-1
fb:90126c20 1366x768x pitch 5632 format 34325258
<6>[drm] Allocated atomic state 90146f18
<6>[drm] 90126bb0: blob ID: 49 (1)
<6>[drm] Added [CRTC:21] 90147048 state to 90146f18
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] Added [PLANE:18] 90147318 state to 90146f18
<6>[drm] 90126bb0: blob ID: 49 (2)
<6>[drm] Set [MODE:1366x768] for CRTC state 90147048
<6>[drm] Link plane state 90147318 to [CRTC:21]
<6>[drm] 90126c20: FB ID: 50 (4)
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] Set [FB:50] for plane state 90147318
<6>[drm] Added [CONNECTOR:32] 90147410 state to 90146f18
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] Link connector state 90147410 to [NOCRTC]
<6>[drm] Link connector state 90147410 to [CRTC:21]
<6>[drm] checking 90146f18
<6>[drm] [CRTC:21] mode changed
<6>[drm] Updating routing for [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1] keeps [ENCODER:31:TMDS-31], now on [CRTC:21]
<6>[drm] [CRTC:21] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] State 90146f18 has 1 connectors for [CRTC:21]
<6>[drm] Adding all current connectors for [CRTC:21] to 90146f18
<6>[drm] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
<6>[drm] clamping display bpp (was 36) to EDID reported max of 18
<6>[drm] DP link computation with max lane count 2 max bw 270000 pixel clock 76300KHz
<6>[drm] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
<6>[drm] DP link bw required 137340 available 432000
<6>[drm] hw max bpp: 36, pipe bpp: 18, dithering: 1
<6>[drm] mismatch in dp_m_n (expected tu 64 gmch 2673519/8388608 link 148528/524288, found tu 64, gmch 2666878/8388608 link 148159/524288)
<6>[drm] mismatch in ips_enabled (expected 0, found 1)
<6>[drm] mismatch in ddi_pll_sel (expected 0x80000000, found 0x20000000)
<6>[drm] mismatch in dpll_hw_state.wrpll (expected 0x90280202, found 0x00000000)
<6>[drm] [CRTC:21][modeset] config 90147048 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 1
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2666878, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] crtc timings: 76300 1366 1430 1478 1606 768 770 775 792, type: 0x48 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 1
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1366x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] Added [CRTC:25] 90147428 state to 90146f18
<6>[drm] Added [CRTC:29] 901476f8 state to 90146f18
<6>[drm] [CRTC:21] has [PLANE:18] with fb 50
<6>[drm] [PLANE:18] visible 1 -> 1, off 1, on 1, ms 1
<6>[drm] commiting 90146f18
<6>[drm]
<6>[drm] set backlight PWM = 0
<6>[drm] cpu backlight was enabled, disabling
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x5 p(0,341)@ 130.390890 -> 130.383730 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=131, hw=8498 hw_last=8367
leave drm_vblank_off
<6>[drm] disabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] Turn eDP port A panel power off
<6>[drm] Wait for panel power off time
<6>[drm] mask b0000000 value 00000000 status 80000008 control abcd0000
<6>[drm] Wait complete
<6>[drm] disable WRPLL 1 (active 1, on? 1) for crtc 21
<6>[drm] disabling WRPLL 1
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76300 kHz framedur 16670406 linedur 21048
<6>[drm] disabling display
<6>[drm] Requesting to disable the power well
<6>[drm] Turn eDP port A panel power on
<6>[drm] Wait for panel power cycle
<6>[drm] Enabling RC6 states: RC6 on
<6>[drm] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
<6>[drm] mask b800000f value 00000000 status 00000000 control abcd0000
<6>[drm] Wait complete
<6>[drm] Wait for panel power on
<6>[drm] mask b000000f value 80000008 status 0000000a control abcd0003
<6>[drm] Wait complete
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
<6>[drm] Using signal levels 00000000
<6>[drm] Using vswing level 0
<6>[drm] Using pre-emphasis level 0
<6>[drm] clock recovery OK
<6>[drm] Channel EQ done. DP Training successful
<6>[drm] enabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] crtc 0 : v 0x7 p(0,-24)@ 131.225170 -> 131.225675 [e 1 us, 0 rep]
<6>[drm]
<6>[drm] pipe A
<6>[drm] set backlight PWM = 937
DRM Erroruncleared fifo underrun on pipe A
DRM ErrorCPU pipe A FIFO underrun
<6>[drm] PSR not supported by this panel
<6>[drm] Panel doesn't support DRRS
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,717)@ 131.240848 -> 131.225757 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(0,717)@ 131.240859 -> 131.225767 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,718)@ 131.240874 -> 131.225761 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=0, hw=8500 hw_last=8500
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-23)@ 131.241951 -> 131.242435 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=133, diff=1, hw=8501 hw_last=8500
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 131.241974 -> 131.242437 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=8501 hw_last=8501
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(0,-21)@ 131.241988 -> 131.242430 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=8501 hw_last=8501
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-23)@ 131.258622 -> 131.259106 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=1, hw=8502 hw_last=8501
raise event
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 131.258644 -> 131.259107 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=0, hw=8502 hw_last=8502
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:40:TMDS-40]
<6>[drm] [ENCODER:43:TMDS-43]
<6>[drm] [ENCODER:45:DP MST-45]
<6>[drm] [ENCODER:46:DP MST-46]
<6>[drm] [ENCODER:47:DP MST-47]
<6>[drm] 90126bb0: blob ID: 49 (1)
<6>[drm] [CRTC:21]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] SPLL
<6>[drm] Clearing atomic state 90146f18
<6>[drm] 90126c20: FB ID: 50 (4)
<6>[drm] Freeing atomic state 90146f18
<6>[drm] 90126c20: FB ID: 50 (3)
<6>[drm] new mode 1366 x 768 pitch 5632
Set DISPLAY handler

Походе я сгоряча весь power management отключил.

Serge wrote:Походе я сгоряча весь power management отключил.