Встроенные видеокарты Intel
-
Этот драйвер только для новых видеокарт, или для Intel GMA 3100 тоже можно тестировать?to infinity and beyond
punk_joker
Должен работать. Не поддерживаются только старые AGP i830G-i865G.
Должен работать. Не поддерживаются только старые AGP i830G-i865G.
Изображение осталось, FAR рабочий, мыша отвалилась
K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80031F4C
K : Set IDE IRQ14 return code 8005C550
K : Attach Interrupt 15 Handler 80031F8C
K : Set IDE IRQ15 return code 8005C564
K : clear_pci_ide_interrupts: port[FFA2] = 00 -> 00; port[FFAA] = 60 -> 60
Intel videocard detected, PciId=8086:2592, which is known
K : has_ownership
K : HCSPARAMS=00104208, HCCPARAMS=00006871
K : Attach Interrupt 3 Handler 80D3F8E6
K : EHCI controller at 00:EF with 8 ports initialized
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 3 Handler 80D426C1
K : UHCI 80D4D830 connect status changed, 0082/0080
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 7 Handler 80D426C1
K : UHCI 80D4F830 connect status changed, 0082/0080
K : UHCI 80D4F830 connect status changed, 008A/0080
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80D426C1
K : UHCI 80D51830 connect status changed, 0082/0080
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80D426C1
K : UHCI 80D53830 connect status changed, 0082/0080
K : EHCI 80D4A0A4: status of port 1 changed to 00001803
K : EHCI 80D4A0A4: status of port 2 changed to 00001803
K : EHCI 80D4A0A4: status of port 3 changed to 00001403
K : EHCI 80D4A0A4: status of port 4 changed to 00001803
K : EHCI 80D4A0A4: status of port 7 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C5DC
K : EHCI 80D4A0A4 port 1 state is 00001801
K : EHCI 80D4A0A4: port 1 has HS or FS device, resetting
K : EHCI 80D4A0A4 port 2 state is 00001801
K : EHCI 80D4A0A4 port 3 state is 00001401
K : EHCI 80D4A0A4: port 3 has LS device, releasing
K : EHCI 80D4A0A4 port 4 state is 00001801
K : EHCI 80D4A0A4 port 7 state is 00001801
K : EHCI 80D4A0A4: status of port 3 changed to 00003002
K : EHCI 80D4A0A4 status of port 1 is 00001005
K : EHCI 80D4A0A4: port 2 has HS or FS device, resetting
K : device descriptor: 12 01 00 02 00 00 00 40 28 09 10 00 05 03 01 02 03 01
K : found USB device with ID 0928:0010, 1 configuration(s)
K : EHCI 80D4A0A4 status of port 2 is 00001005
K : config descriptor: 09 02 20 00 01 01 05 C0 00 09 04 00 00 02 08 06 50 04 07 05 01 02 00 02 00 07 05 81 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 2 logical unit(s)
K : media is ready
K : 0 attempts, 2 ticks
K : Command 03 failed
K : EHCI 80D4A0A4: port 4 has HS or FS device, resetting
K : peripheral device type is 00
K : direct-access mass storage device detected
K : device descriptor: 12 01 00 02 00 00 00 40 0C 09 00 10 00 11 01 02 03 01
K : found USB device with ID 090C:1000, 1 configuration(s)
K : EHCI 80D4A0A4 status of port 4 is 00001005
K : EHCI 80D4A0A4: port 7 has HS or FS device, resetting
K : Command 03 failed
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : sector size is 512, last sector is 2879
K : 1 logical unit(s)
K : EHCI 80D4A0A4 status of port 7 is 00001005
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : warning: async advance int missed
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 00 02 00 07 05 82 02 00 02 00
K : Command 03 failed
K : media not ready
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : 1 logical unit(s)
K : peripheral device type is 05
K : Attach Interrupt 12 Handler 80D5F546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
K : media is ready
K : 0 attempts, 22 ticks
L: /SYS/@DOCKY Param:
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 15851519
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 100 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : config descriptor: 09 02 85 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 E3 00 81 00 04 01 00 00 01 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 80 02 E0 01 00 40 19 01 00 40 19 01 00 60 09 00 15 16 05 00 01 15 16 05 00 1E 24 05 02 01 A0 00 78 00 00 94 11 00 00 94 11 00 00 96 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 03 01 B0 00 90 00 00 34 17 00 00 34 17 00 00 C6 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 04 01 40 01 F0 00 00 50 46 00 00 50 46 00 00 58 02 00 15 16 05 00 01 15 16 05 00 1E 24 05 05 01 60 01 20 01 00 D0 5C 00 00 D0 5C 00 00 18 03 00 15 16 05 00 01 15 16 05 00 1E 24 05 06 01 00 05 00 04 00 00 68 01 00 00 68 01 00 00 28 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 00 14 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 04 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 00 0C 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Command 03 failed
K : media is ready
K : 1 attempts, 39 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 7882751
K : UHCI 80D4F830 connect status changed, 01A3/01A1
K : port is shared with EHCI, skipping initial debounce
K : UHCI 80D4F830 status 0280/01A3
K : reset done
K : UHCI 80D4F830 status 01A5
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 00BB4094 3D4007FF FFE80169 00000000
K : 00000001 8740A44A 8082F920 80F8E0A4
K : pipe: 008AA802 00BB4154
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 808B4C88 EBX : 00000007 ECX : 00000002
K : EDX : 00000011 ESI : 7E84AD23 EDI : 87522B3C
K : EBP : 875D6C00 EIP : 80014935 ESP : 8751FD18
K : Flags : 00011A02 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 80014935 [ESP+04]: 00000008 [ESP+08]: 00011A02
K : [ESP+12]: 87520C15 [ESP+16]: 80014661 [ESP+20]: 00000081
K : [ESP+24]: 00000184 [ESP+28]: 87520000 [ESP+32]: 8751FD90
Spoiler:
K : kernel SVN r5365K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80031F4C
K : Set IDE IRQ14 return code 8005C550
K : Attach Interrupt 15 Handler 80031F8C
K : Set IDE IRQ15 return code 8005C564
K : clear_pci_ide_interrupts: port[FFA2] = 00 -> 00; port[FFAA] = 60 -> 60
Intel videocard detected, PciId=8086:2592, which is known
K : has_ownership
K : HCSPARAMS=00104208, HCCPARAMS=00006871
K : Attach Interrupt 3 Handler 80D3F8E6
K : EHCI controller at 00:EF with 8 ports initialized
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 3 Handler 80D426C1
K : UHCI 80D4D830 connect status changed, 0082/0080
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 7 Handler 80D426C1
K : UHCI 80D4F830 connect status changed, 0082/0080
K : UHCI 80D4F830 connect status changed, 008A/0080
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80D426C1
K : UHCI 80D51830 connect status changed, 0082/0080
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80D426C1
K : UHCI 80D53830 connect status changed, 0082/0080
K : EHCI 80D4A0A4: status of port 1 changed to 00001803
K : EHCI 80D4A0A4: status of port 2 changed to 00001803
K : EHCI 80D4A0A4: status of port 3 changed to 00001403
K : EHCI 80D4A0A4: status of port 4 changed to 00001803
K : EHCI 80D4A0A4: status of port 7 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C5DC
K : EHCI 80D4A0A4 port 1 state is 00001801
K : EHCI 80D4A0A4: port 1 has HS or FS device, resetting
K : EHCI 80D4A0A4 port 2 state is 00001801
K : EHCI 80D4A0A4 port 3 state is 00001401
K : EHCI 80D4A0A4: port 3 has LS device, releasing
K : EHCI 80D4A0A4 port 4 state is 00001801
K : EHCI 80D4A0A4 port 7 state is 00001801
K : EHCI 80D4A0A4: status of port 3 changed to 00003002
K : EHCI 80D4A0A4 status of port 1 is 00001005
K : EHCI 80D4A0A4: port 2 has HS or FS device, resetting
K : device descriptor: 12 01 00 02 00 00 00 40 28 09 10 00 05 03 01 02 03 01
K : found USB device with ID 0928:0010, 1 configuration(s)
K : EHCI 80D4A0A4 status of port 2 is 00001005
K : config descriptor: 09 02 20 00 01 01 05 C0 00 09 04 00 00 02 08 06 50 04 07 05 01 02 00 02 00 07 05 81 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 2 logical unit(s)
K : media is ready
K : 0 attempts, 2 ticks
K : Command 03 failed
K : EHCI 80D4A0A4: port 4 has HS or FS device, resetting
K : peripheral device type is 00
K : direct-access mass storage device detected
K : device descriptor: 12 01 00 02 00 00 00 40 0C 09 00 10 00 11 01 02 03 01
K : found USB device with ID 090C:1000, 1 configuration(s)
K : EHCI 80D4A0A4 status of port 4 is 00001005
K : EHCI 80D4A0A4: port 7 has HS or FS device, resetting
K : Command 03 failed
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : sector size is 512, last sector is 2879
K : 1 logical unit(s)
K : EHCI 80D4A0A4 status of port 7 is 00001005
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : warning: async advance int missed
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 00 02 00 07 05 82 02 00 02 00
K : Command 03 failed
K : media not ready
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : 1 logical unit(s)
K : peripheral device type is 05
K : Attach Interrupt 12 Handler 80D5F546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
K : media is ready
K : 0 attempts, 22 ticks
L: /SYS/@DOCKY Param:
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 15851519
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 100 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : config descriptor: 09 02 85 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 E3 00 81 00 04 01 00 00 01 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 80 02 E0 01 00 40 19 01 00 40 19 01 00 60 09 00 15 16 05 00 01 15 16 05 00 1E 24 05 02 01 A0 00 78 00 00 94 11 00 00 94 11 00 00 96 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 03 01 B0 00 90 00 00 34 17 00 00 34 17 00 00 C6 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 04 01 40 01 F0 00 00 50 46 00 00 50 46 00 00 58 02 00 15 16 05 00 01 15 16 05 00 1E 24 05 05 01 60 01 20 01 00 D0 5C 00 00 D0 5C 00 00 18 03 00 15 16 05 00 01 15 16 05 00 1E 24 05 06 01 00 05 00 04 00 00 68 01 00 00 68 01 00 00 28 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 00 14 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 04 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 00 0C 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Command 03 failed
K : media is ready
K : 1 attempts, 39 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 7882751
K : UHCI 80D4F830 connect status changed, 01A3/01A1
K : port is shared with EHCI, skipping initial debounce
K : UHCI 80D4F830 status 0280/01A3
K : reset done
K : UHCI 80D4F830 status 01A5
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 00BB4094 3D4007FF FFE80169 00000000
K : 00000001 8740A44A 8082F920 80F8E0A4
K : pipe: 008AA802 00BB4154
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 808B4C88 EBX : 00000007 ECX : 00000002
K : EDX : 00000011 ESI : 7E84AD23 EDI : 87522B3C
K : EBP : 875D6C00 EIP : 80014935 ESP : 8751FD18
K : Flags : 00011A02 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 80014935 [ESP+04]: 00000008 [ESP+08]: 00011A02
K : [ESP+12]: 87520C15 [ESP+16]: 80014661 [ESP+20]: 00000081
K : [ESP+24]: 00000184 [ESP+28]: 87520000 [ESP+32]: 8751FD90
Kopa
Сразу упал, без всяких предупреждений ? Что-то не то. А на втором ноуте загружается ?
Сразу упал, без всяких предупреждений ? Что-то не то. А на втором ноуте загружается ?
Intel GMA 3100, внешний монитор подключен через VGA (стационар)
при загрузке без параметров просто артефакты.
При -FB=5 все работает но отключаются usb устройства
при загрузке без параметров просто артефакты.
При -FB=5 все работает но отключаются usb устройства
- Attachments
-
-
BOARDLOG.7z (2.72 KiB)Downloaded 156 times
-
to infinity and beyond
На прщессоре Celeron900 падение.Serge wrote:Kopa
Сразу упал, без всяких предупреждений ? Что-то не то. А на втором ноуте загружается ?
На i-5 нормально лог
Spoiler:
K : using mwait for idle loopK : kernel SVN r5365
K : 4 CPU detected
Intel videocard detected, PciId=8086:0A16, which is unknown
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 80AD98E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : EHCI 80ADE0A4: status of port 0 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C564
K : Attach Interrupt 12 Handler 80AE9546
K : EHCI 80ADE0A4 port 0 state is 00001801
K : EHCI 80ADE0A4: port 0 has HS or FS device, resetting
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: probe
RTL8169: init_board
RTL8169: init_board: TxConfig & 0x7c800000 = 0x44800000
RTL8169: init_board: chipset=2
RTL8169: MAC = 74-86-7A-59-63-87
RTL8169: hw_PHY_config: priv.mcfg=3, priv.pcfg=3
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
K : EHCI 80ADE0A4 status of port 0 is 00001005
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/@PANEL Param:
L: /SYS/@DOCKY Param:
K : final: hub 80828AA0 port 2 status 0101 change 01
K : final: hub 80828AA0 port 3 status 0101 change 01
K : final: hub 80828AA0 port 4 status 0101 change 01
K : final: hub 80828AA0 port 6 status 0101 change 01
K : final: hub 80828AA0 port 7 status 0101 change 01
L: /SYS/SETUP Param: BOOT
RTL8169: Set MAC Reg C+CR Offset 0x82h = 0x01h
RTL8169: Waiting for auto-negotiation to complete
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80828AA0 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 0077F360 00747FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 0077E102 08085003 42010000 0077F300
K : 0077F360 00747FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: auto-negotiation complete
RTL8169: resetting
RTL8169: init_ring
RTL8169: hw_start
RTL8169: Attaching int handler to irq B
K : Attach Interrupt 11 Handler 80AFB558
RTL8169: Waiting for chip to reset... RTL8169: done!
RTL8169: Set MAC Reg C+CR Offset 0xE0: bit-3
RTL8169: set_rx_mode
RTL8169: init OK!
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0020
Trying to contact DHCP server
RTL8169: Transmitting packet, buffer:80AF2000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AF7100
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7100
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90049000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AF7110
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7110
RTL8169: INT
RTL8169: INT
RTL8169: INT
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90042000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AF7120
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7120
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7130
Link LocRTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7130
al IP assigned: 169.254.47.143
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7100
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7100
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7110
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7110
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7120
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7120
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7130
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7130
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Transmitting packet, buffer:90042000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AF7100
Exiting
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AF7100
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
i915 v3.19-rc3 test-3 build Jan 13 2015 00:35:54
usage: i915 [options]
-FB=<0-9> Set framebuffer size in megabytes (default: 16)
-l<path> path to log file
-m<WxHxHz> set videomode
LOG: i915 v3.19-rc3 test-3 build Jan 13 2015 00:35:54
sys_alloc 432 bytes
os_mmap 90052000 131072 bytes
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
enter i915_gem_init_stolen
gtt.stolen_size 4000000
mm.stolen_base 9ba00000
<6>[drm] found 67108864 bytes of stolen memory at 9ba00000
leave i915_gem_init_stolen
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 901EB3D0
enter intel_modeset_init
enter intel_init_pm
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
leave intel_init_pm
<6>[drm] 3 display pipes available.
<6>[drm] CDCLK running at 450000KHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
RTL8169: INT
K : warning: relinking handler from IRQ7 to IRQ11
RTL8169: INT
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
RTL8169: INT
RTL8169: INT
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus
<6>[drm] [CRTC:9] hw state readout: enabled
<6>[drm] [CRTC:13] hw state readout: disabled
<6>[drm] [CRTC:17] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:19:TMDS-19] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:28:TMDS-28] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:33:DP MST-33] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:34:DP MST-34] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:35:DP MST-35] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:20:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:29:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:32:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:36:HDMI-A-2] hw state readout: disabled
<6>[drm] [CRTC:9] found active mode: <6>[drm] Modeline 0:"" 0 76489 1366 1430 1478 1606 768 770 775 792 0x0 0x9
<6>[drm] [CRTC:9][setup_hw_state] config for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 1366 0 0 0 768 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x0 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CRTC:13][setup_hw_state] config for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CRTC:17][setup_hw_state] config for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CONNECTOR:20:eDP-1]
<6>[drm] [ENCODER:19:TMDS-19]
<6>[drm] [ENCODER:28:TMDS-28]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:33:DP MST-33]
<6>[drm] [ENCODER:34:DP MST-34]
<6>[drm] [ENCODER:35:DP MST-35]
<6>[drm] [CRTC:9]
<6>[drm] [CRTC:13]
<6>[drm] [CRTC:17]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] pipe/plane 0/0 with fb: size=1366x768@32, offset=0, pitch 5504, size 0x408000
<6>[drm] crtc 9 plane config size 1000000
intel_alloc_plane_obj plane size: 1000000
enter i915_gem_object_create_stolen_for_preallocated
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
leave i915_gem_object_create_stolen_for_preallocated
obj: 90064d58
<6>[drm] plane fb obj 90064d58
leave intel_modeset_init
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 4227072
<6>[drm] fb big enough for plane A (16777216 >= 4227072)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90064480: FB ID: 37 (1)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:20:eDP-1]
<6>[drm] [CONNECTOR:20:eDP-1]
RTL8169: INT
RTL8169: INT
<6>[drm] Sink OUI: 00e04c
RTL8169: INT
RTL8169: INT
<6>[drm] Branch OUI: 00e04c
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:20:eDP-1] probed modes :
<6>[drm] Modeline 21:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 22:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:29:HDMI-A-1]
<6>[drm] [CONNECTOR:29:HDMI-A-1]
RTL8169: INT
<6>[drm] GMBUS [i915 gmbus dpb] NAK for addr: 0050 r(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus dpb
<6>[drm] [CONNECTOR:29:HDMI-A-1] disconnected
<6>[drm] [CONNECTOR:32:DP-1]
<6>[drm] [CONNECTOR:32:DP-1]
<6>[drm] [CONNECTOR:32:DP-1] disconnected
<6>[drm] [CONNECTOR:36:HDMI-A-2]
<6>[drm] [CONNECTOR:36:HDMI-A-2]
RTL8169: INT
<6>[drm] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus dpc
<6>[drm] [CONNECTOR:36:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 20 enabled? yes
<6>[drm] connector 29 enabled? no
<6>[drm] connector 32 enabled? no
<6>[drm] connector 36 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:9]: 1366x768
<6>[drm] connector HDMI-A-1 not enabled, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] desired mode 1366x768 set on crtc 9 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1366x768 fb: 0x00000000, bo 90064d58
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] CONNECTOR 9005cc90 ID:20 status:1 ENCODER 9005c728 ID: 19 CRTC 900583f0 ID:9
<6>[drm] init_display_kms allocate fb name 1
<6>[drm] check mode w:1366 h:768 60Hz
<6>[drm] set mode 1366 768: crtc 9 connector eDP-1
<6>[drm] [CRTC:9] [FB:37] #connectors=1 (x y) (0 0)
<6>[drm] modes are different, full mode set
<6>[drm] Modeline 0:"" 0 76489 1366 1430 1478 1606 768 770 775 792 0x0 0x9
<6>[drm] Modeline 21:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] computed changes for [CRTC:9], mode_changed=1, fb_changed=0
<6>[drm] [CONNECTOR:20:eDP-1] to [CRTC:9]
<6>[drm] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
<6>[drm] [CONNECTOR:20:eDP-1] checking for sink bpp constrains
<6>[drm] clamping display bpp (was 24) to EDID reported max of 18
<6>[drm] DP link computation with max lane count 2 max bw 0a pixel clock 76300KHz
<6>[drm] DP link bw 0a lane count 2 clock 270000 bpp 18
<6>[drm] DP link bw required 137340 available 432000
<6>[drm] plane bpp: 24, pipe bpp: 18, dithering: 1
<6>[drm] [CRTC:9][modeset] config for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 1
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, gmch_m: 2666878, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
<6>[drm] dp: 1, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] crtc timings: 76300 1366 1430 1478 1606 768 770 775 792, type: 0x48 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 1
<6>[drm] double wide: 0
WARN_ON(drm_crtc_vblank_get(crtc) == 0)
WARNING: at intel_display.c:1331
<6>[drm]
RTL8169: INT
<6>[drm] set backlight PWM = 0
RTL8169: INT
<6>[drm] Turn eDP port A panel power off
<6>[drm] Wait for panel power off time
<6>[drm] mask b0000000 value 00000000 status 80000008 control abcd0000
<6>[drm] Wait complete
<6>[drm] no output, disabling
<6>[drm] disable WRPLL 1 (active 1, on? 1) for crtc 9
<6>[drm] disabling WRPLL 1
<6>[drm] crtc 9: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 9: clock 76300 kHz framedur 16670406 linedur 21048, pixeldur 13
<6>[drm] disabling display
<6>[drm] Requesting to disable the power well
<6>[drm] Turn eDP port A panel power on
<6>[drm] Wait for panel power cycle
<6>[drm] mask b800000f value 00000000 status 00000000 control abcd0000
<6>[drm] Wait complete
<6>[drm] Wait for panel power on
<6>[drm] mask b000000f value 80000008 status 0000000a control abcd0003
<6>[drm] Wait complete
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
RTL8169: INT
RTL8169: INT
RTL8169: INT
<6>[drm] Using signal levels 00000000
RTL8169: INT
RTL8169: INT
RTL8169: INT
<6>[drm] clock recovery OK
RTL8169: INT
RTL8169: INT
RTL8169: INT
<6>[drm] Channel EQ done. DP Training successful
RTL8169: INT
<6>[drm]
<6>[drm] pipe A
<6>[drm] set backlight PWM = 937
<6>[drm] PSR not supported by this panel
WARN_ON(drm_crtc_vblank_get(crtc) == 0)
WARNING: at intel_display.c:1331
<6>[drm] Writing base 00000000 00000000 0 0 5632
RTL8169: INT
<6>[drm] disabled per chip default
<6>[drm] [CONNECTOR:20:eDP-1]
<6>[drm] [ENCODER:19:TMDS-19]
<6>[drm] [ENCODER:28:TMDS-28]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:33:DP MST-33]
<6>[drm] [ENCODER:34:DP MST-34]
<6>[drm] [ENCODER:35:DP MST-35]
<6>[drm] [CRTC:9]
<6>[drm] [CRTC:13]
<6>[drm] [CRTC:17]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] 90064480: FB ID: 37 (2)
<6>[drm] new mode 1366 x 768 pitch 5632
leave init_display_kms
Set DISPLAY handler
<6>[drm] Enabling RC6 states: RC6 on
<6>[drm] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
1366 x 768 60 Hz
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: Device: 80AF7000 Status: 4000
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
RTL8169: INT
Kopa
Может драйвер с ошибкой скопировался, выложи падающие i915 i915.dll ?
punk_joker
Похоже у тебя ядро до #5351, потому падает.
Всем
Ядро надо обновить до самого свежего, а #5356 была серьёзная ошибка.
Может драйвер с ошибкой скопировался, выложи падающие i915 i915.dll ?
punk_joker
Похоже у тебя ядро до #5351, потому падает.
Всем
Ядро надо обновить до самого свежего, а #5356 была серьёзная ошибка.
Вряд ли.Serge wrote:Kopa
Может драйвер с ошибкой скопировался, выложи падающие i915 i915.dll ?
Часть запусков драйвера производил после копирования на tmp0 диск и заметил, что в Far размер файла после копирования показан как 2048 байт. Это баг Far?
Запуск с -FB=5 -l
Spoiler:
K : kernel SVN r5365K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80031F4C
K : Set IDE IRQ14 return code 8005C550
K : Attach Interrupt 15 Handler 80031F8C
K : Set IDE IRQ15 return code 8005C564
K : clear_pci_ide_interrupts: port[FFA2] = 00 -> 00; port[FFAA] = 60 -> 60
Intel videocard detected, PciId=8086:2592, which is known
K : has_ownership
K : HCSPARAMS=00104208, HCCPARAMS=00006871
K : Attach Interrupt 3 Handler 80B3F8E6
K : EHCI controller at 00:EF with 8 ports initialized
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 3 Handler 80B426C1
K : UHCI 80B4D830 connect status changed, 0082/0080
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 7 Handler 80B426C1
K : UHCI 80B4F830 connect status changed, 0082/0080
K : UHCI 80B4F830 connect status changed, 008A/0080
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80B426C1
K : UHCI 80B51830 connect status changed, 0082/0080
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80B426C1
K : UHCI 80B53830 connect status changed, 0082/0080
K : EHCI 80B4A0A4: status of port 1 changed to 00001803
K : EHCI 80B4A0A4: status of port 2 changed to 00001803
K : EHCI 80B4A0A4: status of port 3 changed to 00001403
K : EHCI 80B4A0A4: status of port 4 changed to 00001803
K : EHCI 80B4A0A4: status of port 7 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C5DC
K : EHCI 80B4A0A4 port 1 state is 00001801
K : EHCI 80B4A0A4: port 1 has HS or FS device, resetting
K : EHCI 80B4A0A4 port 2 state is 00001801
K : EHCI 80B4A0A4 port 3 state is 00001401
K : EHCI 80B4A0A4: port 3 has LS device, releasing
K : EHCI 80B4A0A4 port 4 state is 00001801
K : EHCI 80B4A0A4 port 7 state is 00001801
K : EHCI 80B4A0A4: status of port 3 changed to 00003002
K : EHCI 80B4A0A4 status of port 1 is 00001005
K : EHCI 80B4A0A4: port 2 has HS or FS device, resetting
K : device descriptor: 12 01 00 02 00 00 00 40 28 09 10 00 05 03 01 02 03 01
K : found USB device with ID 0928:0010, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 2 is 00001005
K : EHCI 80B4A0A4: port 4 has HS or FS device, resetting
K : config descriptor: 09 02 20 00 01 01 05 C0 00 09 04 00 00 02 08 06 50 04 07 05 01 02 00 02 00 07 05 81 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 00 00 00 40 FE 13 00 41 00 01 01 02 03 01
K : found USB device with ID 13FE:4100, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 4 is 00001005
K : EHCI 80B4A0A4: port 7 has HS or FS device, resetting
K : media is ready
K : 0 attempts, 2 ticks
K : config descriptor: 09 02 20 00 01 01 00 80 64 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : peripheral device type is 05
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 7 is 00001005
K : media is ready
K : 0 attempts, 2 ticks
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 00 02 00 07 05 82 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : sector size is 512, last sector is 60532991
K : Attach Interrupt 12 Handler 80B5F546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
L: /SYS/@DOCKY Param:
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 100 MB
K : config descriptor: 09 02 85 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 E3 00 81 00 04 01 00 00 01 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 80 02 E0 01 00 40 19 01 00 40 19 01 00 60 09 00 15 16 05 00 01 15 16 05 00 1E 24 05 02 01 A0 00 78 00 00 94 11 00 00 94 11 00 00 96 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 03 01 B0 00 90 00 00 34 17 00 00 34 17 00 00 C6 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 04 01 40 01 F0 00 00 50 46 00 00 50 46 00 00 58 02 00 15 16 05 00 01 15 16 05 00 1E 24 05 05 01 60 01 20 01 00 D0 5C 00 00 D0 5C 00 00 18 03 00 15 16 05 00 01 15 16 05 00 1E 24 05 06 01 00 05 00 04 00 00 68 01 00 00 68 01 00 00 28 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 00 14 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 04 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 00 0C 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
L: /SYS/SEARCHAP Param:
K : Command 03 failed
K : media is ready
K : 1 attempts, 39 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 7882751
K : UHCI 80B4F830 connect status changed, 01A3/01A1
K : port is shared with EHCI, skipping initial debounce
K : UHCI 80B4F830 status 0280/01A3
K : reset done
K : UHCI 80B4F830 status 01A5
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 008B4094 3D4007FF FFE80169 00000000
K : 00000001 8725A44A 8082AFA8 871560A4
K : pipe: 006AA802 008B4154
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
i915 v3.19-rc3 test-3 build Jan 13 2015 00:35:54
usage: i915 [options]
-FB=<0-9> Set framebuffer size in megabytes (default: 16)
-l<path> path to log file
-m<WxHxHz> set videomode
LOG: i915 v3.19-rc3 test-3 build Jan 13 2015 00:35:54
sys_alloc 432 bytes
os_mmap 8726d000 131072 bytes
PCI device 8086:2641 bus:0 devfn:f8
PCI device 8086:2592 bus:0 devfn:10
PCI device 8086:2590 bus:0 devfn:0
<6>SMBIOS 2.5 present.
<7>DMI: ASUSTeK Computer INC. 900/900, BIOS 1006 03/03/2009
<6>[drm] device 8086:2592
<6>[drm]
<6>[drm] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found.
Info intel_gmch_probe Intel 915GM Chipset
Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
Info intel_gtt_stolen_size detected 8192K stolen memory
<6>[drm] Memory usable by graphics device = 256M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 8M
<6>[drm] ppgtt mode: 0
<6>[drm] enable MCHBAR
<6>[drm] Set default to SSC at 100000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT ALVISO d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is static
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] VBT initial LVDS value 40000300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
enter i915_gem_init_stolen
gtt.stolen_size 800000
<6>[drm] GTT within stolen memory at 0x3ffc0000-0x3fffffff
<6>[drm] Stolen memory adjusted to 0x3f800000-0x3ffbffff
mm.stolen_base 3f800000
<6>[drm] found 8126464 bytes of stolen memory at 3f800000
leave i915_gem_init_stolen
<6>[drm] enabling always-on
<6>[drm] irq=5
K : Attach Interrupt 5 Handler 874063D0
enter intel_modeset_init
enter intel_init_pm
leave intel_init_pm
<6>[drm] 2 display pipes available.
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe A sprite A init failed: -19
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe B sprite B init failed: -19
i915_driver_thread
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus panel
<6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] detected single-link lvds configuration
<6>[drm] Connector LVDS-1 backlight initialized, enabled, brightness 2300665/3784965
<6>[drm] [CRTC:8] hw state readout: disabled
<6>[drm] [CRTC:11] hw state readout: enabled
<6>[drm] [ENCODER:13:LVDS-13] hw state readout: enabled, pipe B
<6>[drm] [ENCODER:17:DAC-17] hw state readout: enabled, pipe B
<6>[drm] [CONNECTOR:12:LVDS-1] hw state readout: enabled
<6>[drm] [CONNECTOR:16:VGA-1] hw state readout: enabled
<6>[drm] [CRTC:11] found active mode: <6>[drm] Modeline 0:"" 0 49959 1024 1044 1054 1344 600 602 605 625 0x0 0xf
<6>[drm] [CRTC:8][setup_hw_state] config for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CRTC:11] wrong plane connection detected!
<6>[drm] memory self-refresh is disabled
WARN_ON(drm_crtc_vblank_get(crtc) == 0)
WARNING: at intel_display.c:1331
<6>[drm] set backlight PWM = 0
<6>[drm] disabling pfit, current: 0x80002668
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] no output, disabling
<6>[drm] [CRTC:11][setup_hw_state] config for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xf
<6>[drm] crtc timings: 49959 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0xf
<6>[drm] port clock: 49959
<6>[drm] pipe src size: 800x600
<6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [ENCODER:13:LVDS-13]
<6>[drm] [ENCODER:17:DAC-17]
<6>[drm] [CRTC:8]
<6>[drm] [CRTC:11]
leave intel_modeset_init
<6>[drm] clearing unused GTT space: [0, ffff000]
<6>[drm] fake context support initialized
<6>[drm] creating stolen object: size=20000
<6>[drm] offset=0x0, size=131072
<6>[drm] pipe A not active or no fb, skipping
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] no active fbs found, not using BIOS config
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1] probed modes :
<6>[drm] Modeline 18:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] [CONNECTOR:16:VGA-1]
<6>[drm] [CONNECTOR:16:VGA-1] force=1
<6>[drm] CRT detected via DDC:0x50 [EDID]
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:16:VGA-1] probed modes :
<6>[drm] Modeline 20:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6
<6>[drm] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 21:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
<6>[drm] Modeline 23:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<6>[drm] Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
<6>[drm] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<6>[drm] Modeline 34:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
<6>[drm] Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 36:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
<6>[drm] Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<6>[drm] Modeline 38:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
<6>[drm] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 26:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<6>[drm] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<6>[drm] Modeline 28:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
<6>[drm] Modeline 29:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
<6>[drm] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<6>[drm]
<6>[drm] connector 12 enabled? yes
<6>[drm] connector 16 enabled? yes
<6>[drm] connector LVDS-1 has no encoder or crtc, skipping
<6>[drm] connector VGA-1 has no encoder or crtc, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 0, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 12
<6>[drm] looking for preferred mode on connector 12 0
<6>[drm] found mode 1024x600
<6>[drm] looking for cmdline mode on connector 16
<6>[drm] looking for preferred mode on connector 16 0
<6>[drm] found mode 1440x900
<6>[drm] picking CRTCs for 4096x4096 config
<6>[drm] desired mode 1024x600 set on crtc 11 (0,0)
<6>[drm] desired mode 1440x900 set on crtc 8 (0,0)
<6>[drm] no BIOS fb, allocating a new one
K : Process - forced terminate PID: 0000001A [i915]
K : Page fault
K : EAX : 00000001 EBX : 00000000 ECX : 00000003
K : EDX : 78000005 ESI : 00000000 EDI : 00010000
K : EBP : 87442280 EIP : 873874A1 ESP : 8726CB50
K : Flags : 00011246 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 873874A1 [ESP+04]: 00000008 [ESP+08]: 00011246
K : [ESP+12]: 873A3364 [ESP+16]: 87442280 [ESP+20]: 8727A428
K : [ESP+24]: 87420EE8 [ESP+28]: 00000088 [ESP+32]: 8726D890
Похоже это падающий драйвер
- Attachments
-
-
drivers.rar (288.44 KiB)Downloaded 164 times
-
Kopa
http://ftp.kolibrios.org/users/Serge/ne ... 9-rc3-4.7z
Проверь i915 -FB=5 -fbc=0
После ключа -l должно сразу, без пробела, идти имя файла для записи лога.Запуск с -FB=5 -l
http://ftp.kolibrios.org/users/Serge/ne ... 9-rc3-4.7z
Проверь i915 -FB=5 -fbc=0
Лог
K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80031F4C
K : Set IDE IRQ14 return code 8005C550
K : Attach Interrupt 15 Handler 80031F8C
K : Set IDE IRQ15 return code 8005C564
K : clear_pci_ide_interrupts: port[FFA2] = 00 -> 00; port[FFAA] = 60 -> 60
Intel videocard detected, PciId=8086:2592, which is known
K : has_ownership
K : HCSPARAMS=00104208, HCCPARAMS=00006871
K : Attach Interrupt 3 Handler 80B3F8E6
K : EHCI controller at 00:EF with 8 ports initialized
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 3 Handler 80B426C1
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 7 Handler 80B426C1
K : UHCI 80B4F830 connect status changed, 0082/0080
K : UHCI 80B4F830 connect status changed, 008A/0080
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80B426C1
K : UHCI 80B51830 connect status changed, 0082/0080
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80B426C1
K : UHCI 80B53830 connect status changed, 0082/0080
K : EHCI 80B4A0A4: status of port 2 changed to 00001803
K : EHCI 80B4A0A4: status of port 3 changed to 00001403
K : EHCI 80B4A0A4: status of port 4 changed to 00001803
K : EHCI 80B4A0A4: status of port 7 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C5DC
K : EHCI 80B4A0A4 port 2 state is 00001801
K : EHCI 80B4A0A4: port 2 has HS or FS device, resetting
K : EHCI 80B4A0A4 port 3 state is 00001401
K : EHCI 80B4A0A4: port 3 has LS device, releasing
K : EHCI 80B4A0A4 port 4 state is 00001801
K : EHCI 80B4A0A4 port 7 state is 00001801
K : EHCI 80B4A0A4: status of port 3 changed to 00003002
K : EHCI 80B4A0A4 status of port 2 is 00001005
K : EHCI 80B4A0A4: port 4 has HS or FS device, resetting
K : device descriptor: 12 01 00 02 00 00 00 40 FE 13 00 41 00 01 01 02 03 01
K : found USB device with ID 13FE:4100, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 4 is 00001005
K : EHCI 80B4A0A4: port 7 has HS or FS device, resetting
K : config descriptor: 09 02 20 00 01 01 00 80 64 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 7 is 00001005
K : media is ready
K : 0 attempts, 2 ticks
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 00 02 00 07 05 82 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : sector size is 512, last sector is 60532991
K : Attach Interrupt 12 Handler 80B5F546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
L: /SYS/@DOCKY Param:
L: /SYS/SETUP Param: BOOT
K : config descriptor: 09 02 85 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 E3 00 81 00 04 01 00 00 01 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 80 02 E0 01 00 40 19 01 00 40 19 01 00 60 09 00 15 16 05 00 01 15 16 05 00 1E 24 05 02 01 A0 00 78 00 00 94 11 00 00 94 11 00 00 96 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 03 01 B0 00 90 00 00 34 17 00 00 34 17 00 00 C6 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 04 01 40 01 F0 00 00 50 46 00 00 50 46 00 00 58 02 00 15 16 05 00 01 15 16 05 00 1E 24 05 05 01 60 01 20 01 00 D0 5C 00 00 D0 5C 00 00 18 03 00 15 16 05 00 01 15 16 05 00 1E 24 05 06 01 00 05 00 04 00 00 68 01 00 00 68 01 00 00 28 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 00 14 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 04 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 00 0C 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Command 03 failed
L: /SYS/@ICON Param:
K : media is ready
K : 1 attempts, 39 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 7882751
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 100 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : UHCI 80B4F830 connect status changed, 01A3/01A1
K : port is shared with EHCI, skipping initial debounce
K : UHCI 80B4F830 status 0280/01A3
K : reset done
K : UHCI 80B4F830 status 01A5
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 009AE094 3D4007FF FFE80169 00000000
K : 00000001 8724144A 8082AE38 8723D0A4
K : pipe: 006AA802 009AE154
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
-pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
build i915 v3.19-rc3 test4 Jan 15 2015
usage: i915 [options]
-FB=<0-9> Set framebuffer size in megabytes (default: 16)
-rc6=<-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
default: -1 (use per-chip default)
-fbc=<-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-ppgt=<0,1> Enable PPGTT (default: true)
-l<path> path to log file
-m<WxHxHz> set videomode
LOG: i915 v3.19-rc3 test4 build Jan 15 2015 02:29:42
sys_alloc 432 bytes
os_mmap 8724f000 131072 bytes
PCI device 8086:2641 bus:0 devfn:f8
PCI device 8086:2592 bus:0 devfn:10
PCI device 8086:2590 bus:0 devfn:0
<6>SMBIOS 2.5 present.
<7>DMI: ASUSTeK Computer INC. 900/900, BIOS 1006 03/03/2009
<6>[drm] device 8086:2592
<6>[drm]
<6>[drm] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found.
Info intel_gmch_probe Intel 915GM Chipset
Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
Info intel_gtt_stolen_size detected 8192K stolen memory
<6>[drm] Memory usable by graphics device = 256M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 8M
<6>[drm] ppgtt mode: 0
<6>[drm] enable MCHBAR
<6>[drm] Set default to SSC at 100000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT ALVISO d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is static
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] VBT initial LVDS value 40000300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
enter i915_gem_init_stolen
gtt.stolen_size 800000
<6>[drm] GTT within stolen memory at 0x3ffc0000-0x3fffffff
<6>[drm] Stolen memory adjusted to 0x3f800000-0x3ffbffff
mm.stolen_base 3f800000
<6>[drm] found 8126464 bytes of stolen memory at 3f800000
leave i915_gem_init_stolen
<6>[drm] enabling always-on
<6>[drm] irq=5
K : Attach Interrupt 5 Handler 873A0400
enter intel_modeset_init
enter intel_init_pm
leave intel_init_pm
<6>[drm] 2 display pipes available.
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe A sprite A init failed: -19
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe B sprite B init failed: -19
i915_driver_thread
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus panel
<6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] detected single-link lvds configuration
<6>[drm] Connector LVDS-1 backlight initialized, enabled, brightness 2300665/3784965
<6>[drm] [CRTC:8] hw state readout: disabled
<6>[drm] [CRTC:11] hw state readout: enabled
<6>[drm] [ENCODER:13:LVDS-13] hw state readout: enabled, pipe B
<6>[drm] [ENCODER:17:DAC-17] hw state readout: enabled, pipe B
<6>[drm] [CONNECTOR:12:LVDS-1] hw state readout: enabled
<6>[drm] [CONNECTOR:16:VGA-1] hw state readout: enabled
<6>[drm] [CRTC:11] found active mode: <6>[drm] Modeline 0:"" 0 49959 1024 1044 1054 1344 600 602 605 625 0x0 0xf
<6>[drm] [CRTC:8][setup_hw_state] config for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CRTC:11] wrong plane connection detected!
<6>[drm] memory self-refresh is disabled
WARN_ON(drm_crtc_vblank_get(crtc) == 0)
WARNING: at intel_display.c:1331
<6>[drm] set backlight PWM = 0
<6>[drm] disabling pfit, current: 0x80002668
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] no output, disabling
<6>[drm] [CRTC:11][setup_hw_state] config for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xf
<6>[drm] crtc timings: 49959 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0xf
<6>[drm] port clock: 49959
<6>[drm] pipe src size: 800x600
<6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [ENCODER:13:LVDS-13]
<6>[drm] [ENCODER:17:DAC-17]
<6>[drm] [CRTC:8]
<6>[drm] [CRTC:11]
leave intel_modeset_init
<6>[drm] clearing unused GTT space: [0, ffff000]
<6>[drm] fake context support initialized
<6>[drm] creating stolen object: size=20000
<6>[drm] offset=0x0, size=131072
<6>[drm] pipe A not active or no fb, skipping
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] no active fbs found, not using BIOS config
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1] probed modes :
<6>[drm] Modeline 18:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] [CONNECTOR:16:VGA-1]
<6>[drm] [CONNECTOR:16:VGA-1] force=1
<6>[drm] CRT detected via DDC:0x50 [EDID]
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:16:VGA-1] probed modes :
<6>[drm] Modeline 20:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6
<6>[drm] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 21:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
<6>[drm] Modeline 23:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<6>[drm] Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
<6>[drm] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<6>[drm] Modeline 34:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
<6>[drm] Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 36:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
<6>[drm] Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<6>[drm] Modeline 38:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
<6>[drm] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 26:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<6>[drm] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<6>[drm] Modeline 28:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
<6>[drm] Modeline 29:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
<6>[drm] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<6>[drm]
<6>[drm] connector 12 enabled? yes
<6>[drm] connector 16 enabled? yes
<6>[drm] connector LVDS-1 has no encoder or crtc, skipping
<6>[drm] connector VGA-1 has no encoder or crtc, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 0, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 12
<6>[drm] looking for preferred mode on connector 12 0
<6>[drm] found mode 1024x600
<6>[drm] looking for cmdline mode on connector 16
<6>[drm] looking for preferred mode on connector 16 0
<6>[drm] found mode 1440x900
<6>[drm] picking CRTCs for 4096x4096 config
<6>[drm] desired mode 1024x600 set on crtc 11 (0,0)
<6>[drm] desired mode 1440x900 set on crtc 8 (0,0)
<6>[drm] no BIOS fb, allocating a new one
K : Process - forced terminate PID: 00000019 [i915]
K : Page fault
K : EAX : 00000001 EBX : 00000000 ECX : 00000003
K : EDX : 78000005 ESI : 00000000 EDI : 00010000
K : EBP : 873DC280 EIP : 873214D1 ESP : 8724EB48
K : Flags : 00011246 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 873214D1 [ESP+04]: 00000008 [ESP+08]: 00011246
K : [ESP+12]: 8733D394 [ESP+16]: 873DC280 [ESP+20]: 8725C428
K : [ESP+24]: 873BB168 [ESP+28]: 00000088 [ESP+32]: 8724F890
Spoiler:
K : kernel SVN r5376K : 1 CPU detected
K : IDE controller programming interface 00010180
K : BAR0 IDE base addr 01F0
K : BAR1 IDE base addr 03F4
K : BAR2 IDE base addr 0170
K : BAR3 IDE base addr 0374
K : BAR4 IDE controller register base addr FFA0
K : IDE Interrupt 00
K : Channel 1 Disk 0
K : Device not found
K : Channel 1 Disk 1
K : Device not found
K : Channel 2 Disk 0
K : Dev: ASUS-PHISON OB SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : Channel 2 Disk 1
K : Dev: ASUS-PHISON SSD
K : PIO possible modes 03
K : PIO set mode 01
K : Multiword DMA possible modes 07
K : Multiword DMA set mode 00
K : Ultra DMA possible modes 1F
K : Ultra DMA set mode 04
K : IDE CH1 PIO because no devices
K : IDE CH2 DMA enabled
K : Attach Interrupt 14 Handler 80031F4C
K : Set IDE IRQ14 return code 8005C550
K : Attach Interrupt 15 Handler 80031F8C
K : Set IDE IRQ15 return code 8005C564
K : clear_pci_ide_interrupts: port[FFA2] = 00 -> 00; port[FFAA] = 60 -> 60
Intel videocard detected, PciId=8086:2592, which is known
K : has_ownership
K : HCSPARAMS=00104208, HCCPARAMS=00006871
K : Attach Interrupt 3 Handler 80B3F8E6
K : EHCI controller at 00:EF with 8 ports initialized
K : UHCI controller at 00:E8 with 2 ports initialized
K : Attach Interrupt 3 Handler 80B426C1
K : UHCI controller at 00:E9 with 2 ports initialized
K : Attach Interrupt 7 Handler 80B426C1
K : UHCI 80B4F830 connect status changed, 0082/0080
K : UHCI 80B4F830 connect status changed, 008A/0080
K : UHCI controller at 00:EA with 2 ports initialized
K : Attach Interrupt 10 Handler 80B426C1
K : UHCI 80B51830 connect status changed, 0082/0080
K : UHCI controller at 00:EB with 2 ports initialized
K : Attach Interrupt 5 Handler 80B426C1
K : UHCI 80B53830 connect status changed, 0082/0080
K : EHCI 80B4A0A4: status of port 2 changed to 00001803
K : EHCI 80B4A0A4: status of port 3 changed to 00001403
K : EHCI 80B4A0A4: status of port 4 changed to 00001803
K : EHCI 80B4A0A4: status of port 7 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C5DC
K : EHCI 80B4A0A4 port 2 state is 00001801
K : EHCI 80B4A0A4: port 2 has HS or FS device, resetting
K : EHCI 80B4A0A4 port 3 state is 00001401
K : EHCI 80B4A0A4: port 3 has LS device, releasing
K : EHCI 80B4A0A4 port 4 state is 00001801
K : EHCI 80B4A0A4 port 7 state is 00001801
K : EHCI 80B4A0A4: status of port 3 changed to 00003002
K : EHCI 80B4A0A4 status of port 2 is 00001005
K : EHCI 80B4A0A4: port 4 has HS or FS device, resetting
K : device descriptor: 12 01 00 02 00 00 00 40 FE 13 00 41 00 01 01 02 03 01
K : found USB device with ID 13FE:4100, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 4 is 00001005
K : EHCI 80B4A0A4: port 7 has HS or FS device, resetting
K : config descriptor: 09 02 20 00 01 01 00 80 64 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 00 00 00 40 51 09 06 16 00 01 01 02 04 01
K : found USB device with ID 0951:1606, 1 configuration(s)
K : EHCI 80B4A0A4 status of port 7 is 00001005
K : media is ready
K : 0 attempts, 2 ticks
K : config descriptor: 09 02 20 00 01 01 00 80 F9 09 04 00 00 02 08 06 50 00 07 05 01 02 00 02 00 07 05 82 02 00 02 00
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : 1 logical unit(s)
K : device descriptor: 12 01 00 02 EF 02 01 40 E3 05 05 05 27 02 00 01 00 01
K : found USB device with ID 05E3:0505, 1 configuration(s)
K : sector size is 512, last sector is 60532991
K : Attach Interrupt 12 Handler 80B5F546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
L: /SYS/@DOCKY Param:
L: /SYS/SETUP Param: BOOT
K : config descriptor: 09 02 85 01 02 01 00 80 31 08 0B 00 02 0E 03 00 00 09 04 00 00 01 0E 01 00 00 0D 24 01 00 01 33 00 80 8D 5B 00 01 01 09 24 03 04 01 01 00 03 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 03 01 00 00 02 7F 07 00 07 05 83 03 04 00 06 05 25 03 04 00 09 04 01 00 00 0E 02 00 00 0E 24 01 01 E3 00 81 00 04 01 00 00 01 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 1E 24 05 01 01 80 02 E0 01 00 40 19 01 00 40 19 01 00 60 09 00 15 16 05 00 01 15 16 05 00 1E 24 05 02 01 A0 00 78 00 00 94 11 00 00 94 11 00 00 96 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 03 01 B0 00 90 00 00 34 17 00 00 34 17 00 00 C6 00 00 15 16 05 00 01 15 16 05 00 1E 24 05 04 01 40 01 F0 00 00 50 46 00 00 50 46 00 00 58 02 00 15 16 05 00 01 15 16 05 00 1E 24 05 05 01 60 01 20 01 00 D0 5C 00 00 D0 5C 00 00 18 03 00 15 16 05 00 01 15 16 05 00 1E 24 05 06 01 00 05 00 04 00 00 68 01 00 00 68 01 00 00 28 00 2A 2C 0A 00 01 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 00 14 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 04 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 00 0C 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 00 00 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : Command 03 failed
L: /SYS/@ICON Param:
K : media is ready
K : 1 attempts, 39 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 7882751
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ 㪠§ , 10% ᢮¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 100 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : UHCI 80B4F830 connect status changed, 01A3/01A1
K : port is shared with EHCI, skipping initial debounce
K : UHCI 80B4F830 status 0280/01A3
K : reset done
K : UHCI 80B4F830 status 01A5
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 009AE094 3D4007FF FFE80169 00000000
K : 00000001 8724144A 8082AE38 8723D0A4
K : pipe: 006AA802 009AE154
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
Searchap: compare files - success!
Searchap: mount directory: /hd3/1
L: AUTORUN.DAT processed
-pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
build i915 v3.19-rc3 test4 Jan 15 2015
usage: i915 [options]
-FB=<0-9> Set framebuffer size in megabytes (default: 16)
-rc6=<-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
default: -1 (use per-chip default)
-fbc=<-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-ppgt=<0,1> Enable PPGTT (default: true)
-l<path> path to log file
-m<WxHxHz> set videomode
LOG: i915 v3.19-rc3 test4 build Jan 15 2015 02:29:42
sys_alloc 432 bytes
os_mmap 8724f000 131072 bytes
PCI device 8086:2641 bus:0 devfn:f8
PCI device 8086:2592 bus:0 devfn:10
PCI device 8086:2590 bus:0 devfn:0
<6>SMBIOS 2.5 present.
<7>DMI: ASUSTeK Computer INC. 900/900, BIOS 1006 03/03/2009
<6>[drm] device 8086:2592
<6>[drm]
<6>[drm] i915 device info: gen=3, pciid=0x2592 rev=0x04 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found.
Info intel_gmch_probe Intel 915GM Chipset
Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
Info intel_gtt_stolen_size detected 8192K stolen memory
<6>[drm] Memory usable by graphics device = 256M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 8M
<6>[drm] ppgtt mode: 0
<6>[drm] enable MCHBAR
<6>[drm] Set default to SSC at 100000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT ALVISO d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is static
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] VBT initial LVDS value 40000300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
enter i915_gem_init_stolen
gtt.stolen_size 800000
<6>[drm] GTT within stolen memory at 0x3ffc0000-0x3fffffff
<6>[drm] Stolen memory adjusted to 0x3f800000-0x3ffbffff
mm.stolen_base 3f800000
<6>[drm] found 8126464 bytes of stolen memory at 3f800000
leave i915_gem_init_stolen
<6>[drm] enabling always-on
<6>[drm] irq=5
K : Attach Interrupt 5 Handler 873A0400
enter intel_modeset_init
enter intel_init_pm
leave intel_init_pm
<6>[drm] 2 display pipes available.
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe A sprite A init failed: -19
<6>[drm] swapping pipes & planes for FBC
<6>[drm] pipe B sprite B init failed: -19
i915_driver_thread
<6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
<6>[drm] drm: skipping non-existent adapter i915 gmbus panel
<6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] detected single-link lvds configuration
<6>[drm] Connector LVDS-1 backlight initialized, enabled, brightness 2300665/3784965
<6>[drm] [CRTC:8] hw state readout: disabled
<6>[drm] [CRTC:11] hw state readout: enabled
<6>[drm] [ENCODER:13:LVDS-13] hw state readout: enabled, pipe B
<6>[drm] [ENCODER:17:DAC-17] hw state readout: enabled, pipe B
<6>[drm] [CONNECTOR:12:LVDS-1] hw state readout: enabled
<6>[drm] [CONNECTOR:16:VGA-1] hw state readout: enabled
<6>[drm] [CRTC:11] found active mode: <6>[drm] Modeline 0:"" 0 49959 1024 1044 1054 1344 600 602 605 625 0x0 0xf
<6>[drm] [CRTC:8][setup_hw_state] config for pipe A
<6>[drm] cpu_transcoder: A
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [CRTC:11] wrong plane connection detected!
<6>[drm] memory self-refresh is disabled
WARN_ON(drm_crtc_vblank_get(crtc) == 0)
WARNING: at intel_display.c:1331
<6>[drm] set backlight PWM = 0
<6>[drm] disabling pfit, current: 0x80002668
<6>[drm] FIFO size - (0x00001d9c) A: 28
<6>[drm] FIFO size - (0x00001d9c) B: 31
<6>[drm] FIFO watermarks - A: 26, B: 29
<6>[drm] memory self-refresh is disabled
<6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
<6>[drm] no output, disabling
<6>[drm] [CRTC:11][setup_hw_state] config for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xf
<6>[drm] crtc timings: 49959 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0xf
<6>[drm] port clock: 49959
<6>[drm] pipe src size: 800x600
<6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] [ENCODER:13:LVDS-13]
<6>[drm] [ENCODER:17:DAC-17]
<6>[drm] [CRTC:8]
<6>[drm] [CRTC:11]
leave intel_modeset_init
<6>[drm] clearing unused GTT space: [0, ffff000]
<6>[drm] fake context support initialized
<6>[drm] creating stolen object: size=20000
<6>[drm] offset=0x0, size=131072
<6>[drm] pipe A not active or no fb, skipping
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] no active fbs found, not using BIOS config
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1]
<6>[drm] [CONNECTOR:12:LVDS-1] probed modes :
<6>[drm] Modeline 18:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
<6>[drm] [CONNECTOR:16:VGA-1]
<6>[drm] [CONNECTOR:16:VGA-1] force=1
<6>[drm] CRT detected via DDC:0x50 [EDID]
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:16:VGA-1] probed modes :
<6>[drm] Modeline 20:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6
<6>[drm] Modeline 32:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 21:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
<6>[drm] Modeline 23:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
<6>[drm] Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
<6>[drm] Modeline 33:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
<6>[drm] Modeline 34:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
<6>[drm] Modeline 35:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 36:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
<6>[drm] Modeline 37:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
<6>[drm] Modeline 38:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
<6>[drm] Modeline 25:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 26:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
<6>[drm] Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
<6>[drm] Modeline 28:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
<6>[drm] Modeline 29:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
<6>[drm] Modeline 30:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 31:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
<6>[drm]
<6>[drm] connector 12 enabled? yes
<6>[drm] connector 16 enabled? yes
<6>[drm] connector LVDS-1 has no encoder or crtc, skipping
<6>[drm] connector VGA-1 has no encoder or crtc, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 0, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 12
<6>[drm] looking for preferred mode on connector 12 0
<6>[drm] found mode 1024x600
<6>[drm] looking for cmdline mode on connector 16
<6>[drm] looking for preferred mode on connector 16 0
<6>[drm] found mode 1440x900
<6>[drm] picking CRTCs for 4096x4096 config
<6>[drm] desired mode 1024x600 set on crtc 11 (0,0)
<6>[drm] desired mode 1440x900 set on crtc 8 (0,0)
<6>[drm] no BIOS fb, allocating a new one
K : Process - forced terminate PID: 00000019 [i915]
K : Page fault
K : EAX : 00000001 EBX : 00000000 ECX : 00000003
K : EDX : 78000005 ESI : 00000000 EDI : 00010000
K : EBP : 873DC280 EIP : 873214D1 ESP : 8724EB48
K : Flags : 00011246 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 873214D1 [ESP+04]: 00000008 [ESP+08]: 00011246
K : [ESP+12]: 8733D394 [ESP+16]: 873DC280 [ESP+20]: 8725C428
K : [ESP+24]: 873BB168 [ESP+28]: 00000088 [ESP+32]: 8724F890
Intel GMA 3100, внешний монитор подключен через VGA (стационар)
при загрузке без параметров просто артефакты.
При -FB=5 все работает, режимы переключаются. Но я все же не могу установить родное разрешении 1920×1080. Один раз в VMODE были все разрешения, но при установке FullHD картинка искажалась, так же как и при запуске без параметров (видимо размер фреймбуфера в 5 мб. все же мал для такого разрешения насколько я понимаю.
при загрузке без параметров просто артефакты.
При -FB=5 все работает, режимы переключаются. Но я все же не могу установить родное разрешении 1920×1080. Один раз в VMODE были все разрешения, но при установке FullHD картинка искажалась, так же как и при запуске без параметров (видимо размер фреймбуфера в 5 мб. все же мал для такого разрешения насколько я понимаю.
- Attachments
-
-
BOARDLOG.7z (5.93 KiB)Downloaded 158 times
-
to infinity and beyond
Но иногда режимы всетаки не появляются.
to infinity and beyond
punk_joker
1920×1080 не получится. Сейчас у тебя максимум можно выделить 8Мб под фреймбуфер -FB=8. Этого немного не хватит. Проблема решится после правок в ядре.
Update.
А ещё посмотри настройки биос, можно там увеличить объём видеопамяти ?
1920×1080 не получится. Сейчас у тебя максимум можно выделить 8Мб под фреймбуфер -FB=8. Этого немного не хватит. Проблема решится после правок в ядре.
Update.
А ещё посмотри настройки биос, можно там увеличить объём видеопамяти ?
Who is online
Users browsing this forum: No registered users and 4 guests