Встроенные видеокарты Intel

Drivers for various video cards
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Исправлены критические и не очень ошибки + 2D драйвер intel-sna.drv
    http://ftp.kolibrios.org/users/Serge/ne ... 12.5-v0.7z или viewtopic.php?f=42&t=2390
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Свежее обновление http://ftp.kolibrios.org/users/Serge/ne ... v3.12.9.7z
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    Работает (Asus PC-900), но

    1. После запуска происходит переключение с внешнего монитора на внутренний экран 1024x600 (других параметров выбора разрешения нет)

    2. Курсор "дополнен" небольшим зашумлённым фиолетовым прямоугольником (ниже курсора) :)
    3. Имеется последняя белая пиксельная строка (не на всю ширину экрана за нижней панелью)
    4. Программа тест монитора - зависла. (ESC key)

    P.S. Но были и старты графической системы без "артефактов"
    Last edited by Kopa on Tue Jan 28, 2014 2:27 am, edited 6 times in total.
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Kopa
    Это какой чип из списка http://websvn.kolibrios.org/filedetails ... 5_pciids.h ?
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    Serge wrote:Kopa
    Это какой чип из списка http://websvn.kolibrios.org/filedetails ... 5_pciids.h ?
    915GM/GMS,910 GML
    1. 8086&DEV_2592&SUBSYS_82D91043&REV-04\3&11583659&0&10
    2. 8086&DEV_2792&SUBSYS_82D91043&REV-04\3&11583659&0&10

    P.S. Log for 915
    Spoiler:i915 v3.12.5 build Jan 27 2014 23:59:03
    usage: i915 [options]
    -pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 0 - false)
    -rc6=<-1,0-7> Enable power-saving render C-state 6.
    Different stages can be selected via bitmask values
    (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
    For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
    default: -1 (use per-chip default)
    -fbc=<-1,0,1> Enable frame buffer compression for power savings
    (default: 0 - false)
    -ppgt=<0,1> Enable PPGTT (default: 0 - false)
    -pc8=<0,1> Enable support for low power package C states (PC8+) (default: 0 - false)
    -l<path> path to log file
    -m<WxHxHz> set videomode
    sys_alloc 432 bytes
    os_mmap 87167000 131072 bytes
    PCI device 8086:2641 bus:0 devfn:f8
    PCI device 8086:2592 bus:0 devfn:10
    PCI device 8086:2590 bus:0 devfn:0
    <6>[drm] device 8086:2592
    Info intel_gmch_probe Intel 915GM Chipset
    Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
    Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
    Info intel_gtt_stolen_size detected 8192K stolen memory
    <6>[drm] Memory usable by graphics device = 256M
    Epic fail
    <3>[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    K : Attach Interrupt 5 Handler 871ECC63
    object 0x00000000 [fenceable? 1] not 1M or pot-size (0x00c00000) aligned

    WARNING: at i915_gem.c:2619
    CRTC 8716ce98
    object 0x00000000 [fenceable? 1] not 1M or pot-size (0x00c00000) aligned

    WARNING: at i915_gem.c:2619
    leave init_display_kms
    Set DISPLAY handler
    i915_driver_thread
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    http://ftp.kolibrios.org/users/Serge/ne ... .14-rc1.7z
    Ядро 3.14 будет основой на ближайшие полгода.
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    Log
    Spoiler:i915 v3.14-rc1 build Feb 6 2014 09:34:50
    usage: i915 [options]
    -pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
    -rc6=<-1,0-7> Enable power-saving render C-state 6.
    Different stages can be selected via bitmask values
    (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
    For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
    default: -1 (use per-chip default)
    -fbc=<-1,0,1> Enable frame buffer compression for power savings
    (default: -1 (use per-chip default))
    -ppgt=<0,1> Enable PPGTT (default: true)
    -pc8=<0,1> Enable support for low power package C states (PC8+) (default: 0 - false)
    -l<path> path to log file
    -m<WxHxHz> set videomode
    sys_alloc 432 bytes
    os_mmap 87175000 131072 bytes
    PCI device 8086:2641 bus:0 devfn:f8
    PCI device 8086:2592 bus:0 devfn:10
    PCI device 8086:2590 bus:0 devfn:0
    <6>[drm] device 8086:2592
    <6>[drm]
    <6>[drm] i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found?
    Info intel_gmch_probe Intel 915GM Chipset
    Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
    Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
    Info intel_gtt_stolen_size detected 8192K stolen memory
    <6>[drm] Memory usable by graphics device = 256M
    <6>[drm] GMADR size = 256M
    <6>[drm] GTT stolen size = 8M
    Epic fail
    <3>[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    <6>[drm] Set default to SSC at 100000 kHz
    <6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
    <6>[drm] crt_ddc_bus_pin: 2
    <6>[drm] Found panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] VBT initial LVDS value 40000300
    <6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
    <6>[drm] Found SDVO panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
    <6>[drm] No SDVO device info is found in VBT
    <6>[drm] No MIPI BDB found<6>[drm] creating preallocated framebuffer object: gtt_offset=0, size=1000000
    <6>[drm] offset=0x0, size=16777216
    <6>[drm] kos_gem_fb_object_create allocate fb name 1
    <6>[drm] found 8388608 bytes of stolen memory at 3f800000
    <6>[drm] irq=5
    K : Attach Interrupt 5 Handler 872066AB
    <6>[drm] 2 display pipes available.
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe A sprite A init failed: -19
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe B sprite B init failed: -19
    <6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
    <6>[drm] drm: skipping non-existent adapter i915 gmbus panel
    <6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] detected single-link lvds configuration
    <6>[drm] backlight initialized, enabled, brightness 14843/14843, sysfs interface not registered
    <6>[drm] reserving preallocated space: 0 + 1000000
    <6>[drm] clearing unused GTT space: [1000000, ffff000]
    <6>[drm] creating stolen object: size=20000
    <6>[drm] offset=0x0, size=131072
    <6>[drm] [CRTC:3] hw state readout: disabled
    <6>[drm] [CRTC:4] hw state readout: enabled
    <6>[drm] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
    <6>[drm] [ENCODER:10:DAC-10] hw state readout: enabled, pipe B
    <6>[drm] [CONNECTOR:5:LVDS-1] hw state readout: enabled
    <6>[drm] [CONNECTOR:9:VGA-1] hw state readout: enabled
    <6>[drm] [CRTC:3][setup_hw_state] config for pipe A
    <6>[drm] cpu_transcoder: A
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
    <6>[drm] port clock: 0
    <6>[drm] pipe src size: 0x0
    <6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [CRTC:4] wrong plane connection detected!
    <6>[drm] set backlight PWM = 0
    <6>[drm] disabling pfit, current: 0x80002668
    <6>[drm] FIFO size - (0x00001d9c) A: 28
    <6>[drm] FIFO size - (0x00001d9c) B: 31
    <6>[drm] FIFO watermarks - A: 26, B: 29
    <6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
    <6>[drm] memory self refresh disabled
    <6>[drm] no output, disabling
    <6>[drm] [CRTC:4][setup_hw_state] config for pipe B
    <6>[drm] cpu_transcoder: B
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xf
    <6>[drm] crtc timings: 49959 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0xf
    <6>[drm] port clock: 49959
    <6>[drm] pipe src size: 800x600
    <6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [ENCODER:6:LVDS-6]
    <6>[drm] [ENCODER:10:DAC-10]
    <6>[drm] [CRTC:3]
    <6>[drm] [CRTC:4]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1] probed modes :
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] [CONNECTOR:9:VGA-1]
    <6>[drm] [CONNECTOR:9:VGA-1] force=1
    <6>[drm] CRT detected via DDC:0x50 [EDID]
    <6>[drm] ELD: no CEA Extension found
    <6>[drm] [CONNECTOR:9:VGA-1] probed modes :
    <6>[drm] Modeline 13:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6
    <6>[drm] Modeline 25:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
    <6>[drm] Modeline 15:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
    <6>[drm] Modeline 14:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
    <6>[drm] Modeline 16:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
    <6>[drm] Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
    <6>[drm] Modeline 26:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
    <6>[drm] Modeline 27:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
    <6>[drm] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
    <6>[drm] Modeline 29:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
    <6>[drm] Modeline 30:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
    <6>[drm] Modeline 31:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
    <6>[drm] Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
    <6>[drm] Modeline 19:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
    <6>[drm] Modeline 20:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
    <6>[drm] Modeline 21:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
    <6>[drm] Modeline 22:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
    <6>[drm] Modeline 23:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
    <6>[drm] Modeline 24:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
    <6>[drm]
    <6>[drm] connector 5 enabled? yes
    <6>[drm] connector 9 enabled? yes
    <6>[drm] looking for cmdline mode on connector 5
    <6>[drm] looking for preferred mode on connector 5
    <6>[drm] found mode 1024x600
    <6>[drm] looking for cmdline mode on connector 9
    <6>[drm] looking for preferred mode on connector 9
    <6>[drm] found mode 1440x900
    <6>[drm] picking CRTCs for 4096x4096 config
    <6>[drm] desired mode 1024x600 set on crtc 4
    <6>[drm] desired mode 1440x900 set on crtc 3
    <6>[drm] no BIOS fb, allocating a new one
    <6>[drm] FB ID: 34
    <6>[drm] allocated 1440x900 fb: 0x00000000, bo 871773e8
    <6>[drm]
    <6>[drm] CONNECTOR 8717bf78 ID:5 status:1 ENCODER 8717bef8 CRTC (null) ID:1416
    CRTC 8717b000
    <6>[drm] [Select CRTC: 8717b000 ID:4]
    <6>[drm] check mode w:1024 h:600 60Hz
    <6>[drm] set mode 1024 600: crtc 4 connector LVDS-1 encoder LVDS-6
    <6>[drm] [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
    <6>[drm] modes are different, full mode set
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] computed changes for [CRTC:4], mode_changed=1, fb_changed=0
    <6>[drm] [CONNECTOR:5:LVDS-1] to [CRTC:4]
    <6>[drm] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
    <6>[drm] [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
    <6>[drm] forcing display bpp (was 24) to LVDS (18)
    <6>[drm] plane bpp: 24, pipe bpp: 18, dithering: 1
    <6>[drm] [CRTC:4][modeset] config for pipe B
    <6>[drm] cpu_transcoder: B
    <6>[drm] pipe bpp: 18, dithering: 1
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] crtc timings: 50000 1024 1044 1054 1344 600 602 605 625, type: 0x8 flags: 0xa
    <6>[drm] port clock: 50000
    <6>[drm] pipe src size: 1024x600
    <6>[drm] gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] crtc 4: hwmode: htotal 1344, vtotal 625, vdisplay 600
    <6>[drm] crtc 4: clock 50000 kHz framedur 16800000 linedur 26880, pixeldur 20
    <6>[drm] Writing base 00000000 00000000 0 0 4096
    <6>[drm] [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
    <6>[drm] FIFO size - (0x00001d9c) A: 28
    <6>[drm] FIFO entries required for mode: 16
    <6>[drm] FIFO watermark level: 10
    <6>[drm] FIFO size - (0x00001d9c) B: 31
    <6>[drm] FIFO watermarks - A: 10, B: 29
    <6>[drm] self-refresh entries: 64
    <6>[drm] Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 31
    <6>[drm] memory self refresh enabled
    <6>[drm] disabled per chip default
    <6>[drm] pipe B
    <6>[drm] set backlight PWM = 14843
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [ENCODER:6:LVDS-6]
    <6>[drm] [ENCODER:10:DAC-10]
    <6>[drm] [CRTC:3]
    <6>[drm] [CRTC:4]
    <6>[drm] new mode 1024 x 600 pitch 4096
    leave init_display_kms
    Set DISPLAY handler
    i915_driver_thread
    pci id for -2138922264: 8086:2592, driver i915
    mesa-9.2.5-i915_dri build Jan 31 2014 17:15:22
    EGL_VERSION = 1.4 (DRI2)
    px_create_image w:1024 :600 pitch:4096 handle 1
    create mask bo handle 7 name 3
    create mask image 0x96239e0
    Render: i915_dri.drv
    Шестерёнок нет, двигается рамка с окном (100% CPU) и также драйвер работает только при подключенном внешнем мониторе. Ядро не самое последнее.
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Kopa
    Нужен лог без внешнего монитора. Запусти board <путь к файлу>, чтобы она сразу на диск писала.
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    лог без внешнего монитора.
    Spoiler:i915 v3.14-rc1 build Feb 6 2014 09:34:50
    usage: i915 [options]
    -pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
    -rc6=<-1,0-7> Enable power-saving render C-state 6.
    Different stages can be selected via bitmask values
    (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
    For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
    default: -1 (use per-chip default)
    -fbc=<-1,0,1> Enable frame buffer compression for power savings
    (default: -1 (use per-chip default))
    -ppgt=<0,1> Enable PPGTT (default: true)
    -pc8=<0,1> Enable support for low power package C states (PC8+) (default: 0 - false)
    -l<path> path to log file
    -m<WxHxHz> set videomode
    sys_alloc 432 bytes
    os_mmap 87175000 131072 bytes
    PCI device 8086:2641 bus:0 devfn:f8
    PCI device 8086:2592 bus:0 devfn:10
    PCI device 8086:2590 bus:0 devfn:0
    <6>[drm] device 8086:2592
    <6>[drm]
    <6>[drm] i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found?
    Info intel_gmch_probe Intel 915GM Chipset
    Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
    Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
    Info intel_gtt_stolen_size detected 8192K stolen memory
    <6>[drm] Memory usable by graphics device = 256M
    <6>[drm] GMADR size = 256M
    <6>[drm] GTT stolen size = 8M
    Epic fail
    <3>[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    <6>[drm] Set default to SSC at 100000 kHz
    <6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
    <6>[drm] crt_ddc_bus_pin: 2
    <6>[drm] Found panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] VBT initial LVDS value 40000300
    <6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
    <6>[drm] Found SDVO panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
    <6>[drm] No SDVO device info is found in VBT
    <6>[drm] No MIPI BDB found<6>[drm] creating preallocated framebuffer object: gtt_offset=0, size=1000000
    <6>[drm] offset=0x0, size=16777216
    <6>[drm] kos_gem_fb_object_create allocate fb name 1
    <6>[drm] found 8388608 bytes of stolen memory at 3f800000
    <6>[drm] irq=5
    K : Attach Interrupt 5 Handler 872066AB
    <6>[drm] 2 display pipes available.
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe A sprite A init failed: -19
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe B sprite B init failed: -19
    <6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
    <6>[drm] drm: skipping non-existent adapter i915 gmbus panel
    <6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] detected single-link lvds configuration
    <6>[drm] backlight initialized, enabled, brightness 14843/14843, sysfs interface not registered
    <6>[drm] reserving preallocated space: 0 + 1000000
    <6>[drm] clearing unused GTT space: [1000000, ffff000]
    <6>[drm] creating stolen object: size=20000
    <6>[drm] offset=0x0, size=131072
    <6>[drm] [CRTC:3] hw state readout: disabled
    <6>[drm] [CRTC:4] hw state readout: enabled
    <6>[drm] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
    <6>[drm] [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
    <6>[drm] [CONNECTOR:5:LVDS-1] hw state readout: enabled
    <6>[drm] [CONNECTOR:9:VGA-1] hw state readout: disabled
    <6>[drm] [CRTC:3][setup_hw_state] config for pipe A
    <6>[drm] cpu_transcoder: A
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
    <6>[drm] port clock: 0
    <6>[drm] pipe src size: 0x0
    <6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [CRTC:4] wrong plane connection detected!
    <6>[drm] set backlight PWM = 0
    <6>[drm] disabling pfit, current: 0x80002668
    <6>[drm] FIFO size - (0x00001d9c) A: 28
    <6>[drm] FIFO size - (0x00001d9c) B: 31
    <6>[drm] FIFO watermarks - A: 26, B: 29
    <6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
    <6>[drm] memory self refresh disabled
    <6>[drm] no output, disabling
    <6>[drm] [CRTC:4][setup_hw_state] config for pipe B
    <6>[drm] cpu_transcoder: B
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x5
    <6>[drm] crtc timings: 48000 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0x5
    <6>[drm] port clock: 48000
    <6>[drm] pipe src size: 800x600
    <6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [ENCODER:6:LVDS-6]
    <6>[drm] [ENCODER:10:DAC-10]
    <6>[drm] [CRTC:3]
    <6>[drm] [CRTC:4]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1] probed modes :
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] [CONNECTOR:9:VGA-1]
    <6>[drm] [CONNECTOR:9:VGA-1] force=1
    <6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
    <6>[drm] drm: skipping non-existent adapter i915 gmbus vga
    <6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
    <6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
    <6>[drm] drm: skipping non-existent adapter i915 gmbus vga
    <6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
    <6>[drm] CRT not detected via DDC:0x50 [no valid EDID found]
    <6>[drm] [CONNECTOR:9:VGA-1], [ENCODER:10:DAC-10]
    <6>[drm] creating tmp fb for load-detection
    <6>[drm] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
    <6>[drm] unsupported depth
    <6>[drm] failed to set mode on load-detect pipe
    <6>[drm] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
    <6>[drm] drm: skipping non-existent adapter i915 gmbus vga
    <6>[drm] CRT GMBUS EDID read failed, retry using GPIO bit-banging
    <6>[drm] enabling bit-banging on i915 gmbus vga. force bit now 1
    <6>[drm] drm: skipping non-existent adapter i915 gmbus vga
    <6>[drm] disabling bit-banging on i915 gmbus vga. force bit now 0
    <6>[drm]
    <6>[drm] connector 5 enabled? yes
    <6>[drm] connector 9 enabled? no
    <6>[drm] looking for cmdline mode on connector 5
    <6>[drm] looking for preferred mode on connector 5
    <6>[drm] found mode 1024x600
    <6>[drm] picking CRTCs for 4096x4096 config
    <6>[drm] desired mode 1024x600 set on crtc 4
    <6>[drm] no BIOS fb, allocating a new one
    <6>[drm] FB ID: 13
    <6>[drm] allocated 1024x600 fb: 0x00000000, bo 871773e8
    <6>[drm]
    <6>[drm] CONNECTOR 8717bf78 ID:5 status:1 ENCODER 8717bef8 CRTC (null) ID:1416
    CRTC 8717b000
    <6>[drm] [Select CRTC: 8717b000 ID:4]
    <6>[drm] check mode w:1024 h:600 60Hz
    <6>[drm] set mode 1024 600: crtc 4 connector LVDS-1 encoder LVDS-6
    <6>[drm] [CRTC:4] [FB:13] #connectors=1 (x y) (0 0)
    <6>[drm] modes are different, full mode set
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] computed changes for [CRTC:4], mode_changed=1, fb_changed=0
    <6>[drm] encoder changed, full mode switch
    <6>[drm] [CONNECTOR:5:LVDS-1] to [CRTC:4]
    K : Process - forced terminate PID: 00000019 [i915]
    K : Page fault
    K : EAX : 00000007 EBX : 8716DCE0 ECX : 554E454D
    K : EDX : 00000000 ESI : 8717E488 EDI : 00000000
    K : EBP : 871804A0 EIP : 8723612F ESP : 8716DC4C
    K : Flags : 00011246 CS : 00000008 (kernel)
    K : Stack dump:
    K : [ESP+00]: 8723612F [ESP+04]: 00000008 [ESP+08]: 00011246
    K : [ESP+12]: 87259578 [ESP+16]: 00000005 [ESP+20]: 872604A0
    K : [ESP+24]: 00000004 [ESP+28]: 00000000 [ESP+32]: 00000000
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    лог без внешнего монитора.
    Spoiler:i915 v3.14-rc2 build Feb 11 2014 15:17:29
    usage: i915 [options]
    -pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
    -rc6=<-1,0-7> Enable power-saving render C-state 6.
    Different stages can be selected via bitmask values
    (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
    For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
    default: -1 (use per-chip default)
    -fbc=<-1,0,1> Enable frame buffer compression for power savings
    (default: -1 (use per-chip default))
    -ppgt=<0,1> Enable PPGTT (default: true)
    -pc8=<0,1> Enable support for low power package C states (PC8+) (default: 0 - false)
    -l<path> path to log file
    -m<WxHxHz> set videomode
    sys_alloc 432 bytes
    os_mmap 87177000 131072 bytes
    PCI device 8086:2641 bus:0 devfn:f8
    PCI device 8086:2592 bus:0 devfn:10
    PCI device 8086:2590 bus:0 devfn:0
    <6>[drm] device 8086:2592
    <6>[drm]
    <6>[drm] i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found?
    Info intel_gmch_probe Intel 915GM Chipset
    Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
    Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
    Info intel_gtt_stolen_size detected 8192K stolen memory
    <6>[drm] Memory usable by graphics device = 256M
    <6>[drm] GMADR size = 256M
    <6>[drm] GTT stolen size = 8M
    Epic fail
    <3>[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    <6>[drm] Set default to SSC at 100000 kHz
    <6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
    <6>[drm] crt_ddc_bus_pin: 2
    <6>[drm] Found panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] VBT initial LVDS value 40000300
    <6>[drm] VBT backlight PWM modulation frequency 200 Hz,
    Чёрный экран

    P.S. Может обычного решения нет?
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Kopa
    А лог доски отладки ?
  • Kopa
    Posts 707
    Joined: Mon Mar 27, 2006 6:33 am

    Serge wrote:Kopa
    А лог доски отладки ?
    Вроде выше оно по записи в файл :)

    Ещё один
    Spoiler:i915 v3.14-rc2 build Feb 11 2014 15:17:29
    usage: i915 [options]
    -pm=<0,1> Enable powersavings, fbc, downclocking, etc. (default: 1 - true)
    -rc6=<-1,0-7> Enable power-saving render C-state 6.
    Different stages can be selected via bitmask values
    (0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6).
    For example, 3 would enable rc6 and deep rc6, and 7 would enable everything.
    default: -1 (use per-chip default)
    -fbc=<-1,0,1> Enable frame buffer compression for power savings
    (default: -1 (use per-chip default))
    -ppgt=<0,1> Enable PPGTT (default: true)
    -pc8=<0,1> Enable support for low power package C states (PC8+) (default: 0 - false)
    -l<path> path to log file
    -m<WxHxHz> set videomode
    sys_alloc 432 bytes
    os_mmap 87177000 131072 bytes
    PCI device 8086:2641 bus:0 devfn:f8
    PCI device 8086:2592 bus:0 devfn:10
    PCI device 8086:2590 bus:0 devfn:0
    <6>[drm] device 8086:2592
    <6>[drm]
    <6>[drm] i915 device info: gen=3, pciid=0x2592 flags=is_mobile,has_fbc,cursor_needs_physical,has_overlay,overlay_needs_physical,supports_tv,<6>[drm] No PCH found?
    Info intel_gmch_probe Intel 915GM Chipset
    Error intel_i9xx_setup_flush can't ioremap flush page - no chipset flushing
    Info intel_gtt_init detected gtt size: 262144K total, 262144K mappable
    Info intel_gtt_stolen_size detected 8192K stolen memory
    <6>[drm] Memory usable by graphics device = 256M
    <6>[drm] GMADR size = 256M
    <6>[drm] GTT stolen size = 8M
    Epic fail
    <3>[drm:i915_gem_detect_bit_6_swizzle] *ERROR* Couldn't read from MCHBAR. Disabling tiling.
    <6>[drm] Set default to SSC at 100000 kHz
    <6>[drm] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96000 display_clock_mode 0 fdi_rx_polarity_inverted 0
    <6>[drm] crt_ddc_bus_pin: 2
    <6>[drm] Found panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] VBT initial LVDS value 40000300
    <6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 0, level 9
    <6>[drm] Found SDVO panel mode in BIOS VBT tables:
    <6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
    <6>[drm] No SDVO device info is found in VBT
    <6>[drm] No MIPI BDB found<6>[drm] creating preallocated framebuffer object: gtt_offset=0, size=1000000
    <6>[drm] offset=0x0, size=16777216
    <6>[drm] kos_gem_fb_object_create allocate fb name 1
    <6>[drm] found 8388608 bytes of stolen memory at 3f800000
    <6>[drm] irq=5
    K : Attach Interrupt 5 Handler 8720AB5F
    <6>[drm] 2 display pipes available.
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe A sprite A init failed: -19
    <6>[drm] swapping pipes & planes for FBC
    <6>[drm] pipe B sprite B init failed: -19
    <6>[drm] GMBUS [i915 gmbus panel] NAK for addr: 0050 r(1)
    <6>[drm] drm: skipping non-existent adapter i915 gmbus panel
    <6>[drm] using mode from VBT: <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] detected single-link lvds configuration
    <6>[drm] backlight initialized, enabled, brightness 14843/14843, sysfs interface not registered
    <6>[drm] reserving preallocated space: 0 + 1000000
    <6>[drm] clearing unused GTT space: [1000000, ffff000]
    <6>[drm] creating stolen object: size=20000
    <6>[drm] offset=0x0, size=131072
    <6>[drm] [CRTC:3] hw state readout: disabled
    <6>[drm] [CRTC:4] hw state readout: enabled
    <6>[drm] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe B
    <6>[drm] [ENCODER:10:DAC-10] hw state readout: enabled, pipe B
    <6>[drm] [CONNECTOR:5:LVDS-1] hw state readout: enabled
    <6>[drm] [CONNECTOR:9:VGA-1] hw state readout: enabled
    <6>[drm] [CRTC:3][setup_hw_state] config for pipe A
    <6>[drm] cpu_transcoder: A
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
    <6>[drm] port clock: 0
    <6>[drm] pipe src size: 0x0
    <6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [CRTC:4] wrong plane connection detected!
    <6>[drm] set backlight PWM = 0
    <6>[drm] disabling pfit, current: 0x80002668
    <6>[drm] FIFO size - (0x00001d9c) A: 28
    <6>[drm] FIFO size - (0x00001d9c) B: 31
    <6>[drm] FIFO watermarks - A: 26, B: 29
    <6>[drm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
    <6>[drm] memory self refresh disabled
    <6>[drm] no output, disabling
    <6>[drm] [CRTC:4][setup_hw_state] config for pipe B
    <6>[drm] cpu_transcoder: B
    <6>[drm] pipe bpp: 0, dithering: 0
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"" 0 0 800 0 0 0 600 0 0 0 0x0 0x0
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xf
    <6>[drm] crtc timings: 49959 1024 1044 1054 1344 600 602 605 625, type: 0x0 flags: 0xf
    <6>[drm] port clock: 49959
    <6>[drm] pipe src size: 800x600
    <6>[drm] gmch pfit: control: 0x80002668, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] [ENCODER:6:LVDS-6]
    <6>[drm] [ENCODER:10:DAC-10]
    <6>[drm] [CRTC:3]
    <6>[drm] [CRTC:4]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [CONNECTOR:5:LVDS-1] probed modes :
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] [CONNECTOR:9:VGA-1]
    <6>[drm] [CONNECTOR:9:VGA-1] force=1
    <6>[drm] CRT detected via DDC:0x50 [EDID]
    <6>[drm] ELD: no CEA Extension found
    <6>[drm] [CONNECTOR:9:VGA-1] probed modes :
    <6>[drm] Modeline 13:"1440x900" 60 106500 1440 1520 1672 1904 900 903 909 934 0x48 0x6
    <6>[drm] Modeline 25:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
    <6>[drm] Modeline 15:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
    <6>[drm] Modeline 14:"1440x900" 75 136750 1440 1536 1688 1936 900 903 909 942 0x40 0x6
    <6>[drm] Modeline 16:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
    <6>[drm] Modeline 17:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
    <6>[drm] Modeline 26:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
    <6>[drm] Modeline 27:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
    <6>[drm] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
    <6>[drm] Modeline 29:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
    <6>[drm] Modeline 30:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
    <6>[drm] Modeline 31:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
    <6>[drm] Modeline 18:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
    <6>[drm] Modeline 19:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
    <6>[drm] Modeline 20:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
    <6>[drm] Modeline 21:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
    <6>[drm] Modeline 22:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
    <6>[drm] Modeline 23:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
    <6>[drm] Modeline 24:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
    <6>[drm]
    <6>[drm] connector 5 enabled? yes
    <6>[drm] connector 9 enabled? yes
    <6>[drm] looking for cmdline mode on connector 5
    <6>[drm] looking for preferred mode on connector 5
    <6>[drm] found mode 1024x600
    <6>[drm] looking for cmdline mode on connector 9
    <6>[drm] looking for preferred mode on connector 9
    <6>[drm] found mode 1440x900
    <6>[drm] picking CRTCs for 4096x4096 config
    <6>[drm] desired mode 1024x600 set on crtc 4
    <6>[drm] desired mode 1440x900 set on crtc 3
    <6>[drm] no BIOS fb, allocating a new one
    <6>[drm] FB ID: 34
    <6>[drm] allocated 1440x900 fb: 0x00000000, bo 871793e8
    <6>[drm]
    <6>[drm] use CRTC 8717d000 ID 4
    <6>[drm] CONNECTOR 8717df78 ID:5 status:1 ENCODER 8717def8 ID: 6 CRTC 8717d000 ID:4
    <6>[drm] check mode w:1024 h:600 60Hz
    <6>[drm] set mode 1024 600: crtc 4 connector LVDS-1
    <6>[drm] [CRTC:4] [FB:34] #connectors=1 (x y) (0 0)
    <6>[drm] inactive crtc, full mode set
    <6>[drm] modes are different, full mode set
    <6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
    <6>[drm] Modeline 11:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] computed changes for [CRTC:4], mode_changed=1, fb_changed=0
    enter intel_modeset_stage_output_state
    <6>[drm] encoder changed, full mode switch
    <6>[drm] [CONNECTOR:5:LVDS-1] to [CRTC:4]
    leave intel_modeset_stage_output_state
    enter intel_set_mode
    <6>[drm] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
    <6>[drm] [CONNECTOR:5:LVDS-1] checking for sink bpp constrains
    <6>[drm] forcing display bpp (was 24) to LVDS (18)
    <6>[drm] plane bpp: 24, pipe bpp: 18, dithering: 1
    <6>[drm] [CRTC:4][modeset] config for pipe B
    <6>[drm] cpu_transcoder: B
    <6>[drm] pipe bpp: 18, dithering: 1
    <6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
    <6>[drm] requested mode:
    <6>[drm] Modeline 0:"1024x600" 60 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] adjusted mode:
    <6>[drm] Modeline 0:"1024x600" 0 50000 1024 1044 1054 1344 600 602 605 625 0x8 0xa
    <6>[drm] crtc timings: 50000 1024 1044 1054 1344 600 602 605 625, type: 0x8 flags: 0xa
    <6>[drm] port clock: 50000
    <6>[drm] pipe src size: 1024x600
    <6>[drm] gmch pfit: control: 0x00000008, ratios: 0x00000000, lvds border: 0x00000000
    <6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
    <6>[drm] ips: 0
    <6>[drm] double wide: 0
    <6>[drm] crtc 4: hwmode: htotal 1344, vtotal 625, vdisplay 600
    <6>[drm] crtc 4: clock 50000 kHz framedur 16800000 linedur 26880, pixeldur 20
    <6>[drm] Writing base 00000000 00000000 0 0 4096
    <6>[drm] [ENCODER:6:LVDS-6] set [MODE:0:1024x600]
    <6>[drm] FIFO size - (0x00001d9c) A: 28
    <6>[drm] FIFO entries required for mode: 16
    <6>[drm] FIFO watermark level: 10
    <6>[drm] FIFO size - (0x00001d9c) B: 31
    <6>[drm] FIFO watermarks - A: 10, B: 29
    <6>[drm] self-refresh entries: 64
    <6>[drm] Setting FIFO watermarks - A: 10, B: 29, C: 2, SR 31
    <6>[drm] memory self refresh enabled
    <6>[drm] disabled per chip default
    <6>[drm] pipe B
    <6>[drm] set backlight PWM = 14843
    <6>[drm] [CONNECTOR:5:LVDS-1]
    <6>[drm] [ENCODER:6:LVDS-6]
    <6>[drm] [ENCODER:10:DAC-10]
    <6>[drm] [CRTC:3]
    <6>[drm] [CRTC:4]
    leave intel_set_mode
    <6>[drm] new mode 1024 x 600 pitch 4096
    leave init_display_kms
    Set DISPLAY handler
    i915_driver_thread
    pci id for -2138921408: 8086:2592, driver i915
    mesa-9.2.5-i915_dri build Jan 31 2014 17:15:22
    EGL_VERSION = 1.4 (DRI2)
    px_create_image w:1024 :600 pitch:4096 handle 1
    create mask bo handle 7 name 3
    create mask image 0x96239e0
    Render: i915_dri.drv
  • Serge Kernel Developer
    Posts 3952
    Joined: Wed Mar 08, 2006 6:25 pm

    Это с монитором. А без монитора ? Похоже вылет был, лог слишком короткий.
    • Post Reply

    Return to “Video”

    Who is online

    Users browsing this forum: No registered users and 4 guests