Hello,
I want to connect to internet, I checked my card information using the PCIDev.
Here are my card information: Vendor ID=14E4, DevID=1677
Is this card supported?
Thank you very much in advance.
Rey
Is my Card supported?
Sorry, it isn't supported in trunk yet, afaik, but hidnplayr can tell you a bit more.
Thank you.
I hope you finish the KolibriOS with web browser.
I will buy the installation CD just to learn on how to build an OS.
Rey
I hope you finish the KolibriOS with web browser.
I will buy the installation CD just to learn on how to build an OS.
Rey
Now HTMLv is something like mobile web browser
KolibriOS is free, and you can download its' CD absoluutely for free. But we can prepare real CD specially for you for price of CD and shipping.
KolibriOS is free, and you can download its' CD absoluutely for free. But we can prepare real CD specially for you for price of CD and shipping.
Hello, currently there is no driver available for the Broadcom network adapters.
It's likely that this driver will be written in the future, this card is well documented.
However, I cannot tell you when
It's likely that this driver will be written in the future, this card is well documented.
However, I cannot tell you when
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
What about VendorID=1317, DevID=985?
It should work with the DEC21x4x driver. However, this PCI ID is not yet in the list, and I havent got this driver to work on my 2 cards yet.Freeman wrote:What about VendorID=1317, DevID=985?
The current driver has only been verified to work in Virtual PC.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
It properly detected my card as ADMTek and then wrote "Could not load driver".hidnplayr wrote:It should work with the DEC21x4x driver. However, this PCI ID is not yet in the list
OK, I have added your PCI ID to the list so you can try it. But i dont really expect it to work (yet)
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
No, it doesn't.
A complete log file might help speed up the developmentFreeman wrote:No, it doesn't.
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Why I have a feeling he tried the trunk night build while you fixed it in Net branchhidnplayr wrote:A complete log file might help speed up the developmentFreeman wrote:No, it doesn't.
I'm not too dumb, unfortunately. So it really does not work and needs to be fixed. I have problems with booting from USB as I wrote and then I cannot get a boad log because I haven't mounted disks to save it. Booting from HDD I got it.yogev_ezra wrote:Why I have a feeling he tried the trunk night build while you fixed it in Net branch
Spoiler:
Code: Select all
PPPoE_stop_connection
K : 1 CPU detected
SOCKET_process_end: 00000003
SOCKET_process_end: 00000005
SOCKET_process_end: 00000004
SOCKET_process_end: 00000006
SOCKET_process_end: 0000000A
Loading DEC21X4X driver
Hooking into device, dev:0, bus:2, irq:A, addr:00009800
Probing dec21x4x device: Vendor id: 0x1317
Vendor ok!, device id: 0x0985
SROM_GetWidth
SROM_Idle
SROM_EnterAccessMode
SROM_EnterAccessMode
Srom width=13
SROM_Idle
SROM_EnterAccessMode
SROM_EnterAccessMode
SROM_Idle
SROM_EnterAccessMode
Resetting dec21x4x
CSR5: FFFFFFFF
>Zero-config service loaded
SOCKET_process_end: 0000000F
CSR5: FFFFFFFF
Read_mac_eeprom
SROM_Read_word at: 0000000A result: FFFF
SROM_Read_word at: 0000000B result: FFFF
SROM_Read_word at: 0000000C result: FFFF
FF-FF-FF-FF-FF-FF
Attaching int handler to irq A
CSR5: FFFFFFFF
RX desc: buff addr: 00AB0100, next desc: 00AB0040, real buff addr: 80D70100, real descr addr: 80D70000
RX desc: buff addr: 00AB0900, next desc: 00AB0080, real buff addr: 80D70900, real descr addr: 80D70040
RX desc: buff addr: 00AB1100, next desc: 00AB00C0, real buff addr: 80D71100, real descr addr: 80D70080
RX desc: buff addr: 00AB1900, next desc: 00AB0100, real buff addr: 80D71900, real descr addr: 80D700C0
TX desc: buff addr: 00AB8100, next desc: 00AB8040, virt buff addr: 80D78100, virt descr addr: 80D78000
TX desc: buff addr: 00AB8900, next desc: 00AB8080, virt buff addr: 80D78900, virt descr addr: 80D78040
TX desc: buff addr: 00AB9100, next desc: 00AB80C0, virt buff addr: 80D79100, virt descr addr: 80D78080
TX desc: buff addr: 00AB9900, next desc: 00AB8100, virt buff addr: 80D79900, virt descr addr: 80D780C0
CSR5: FFFFFFFF
RX descriptor base address: 00AB0000
TX descriptor base address: 00AB8000
CSR5: FFFFFFFF
Enabling interrupts
CSR5: FFFFFFFF
CSR5: FFFFFFFF
Enable RX
CSR6: FFFFFFFF
CSR5: FFFFFFFF
Sending setup packet
Got free descriptor: 0 (80D78000)=>80D78000
copying packet to 80D78100 from 80D5E044
FFFF FFFF FFFF
setting up descriptor
status: 80000000
length: 890000C0
buffer1: 00AB8100
buffer2: 00AB8040
CSR5: FFFFFFFF
Issuing transmit poll command
CSR5: FFFFFFFF
Sending setup packet, completed!
Reset done
NET_Add_Device: 80D5E000
Device number: 0
SOCKET_process_end: 0000000E
========= tmpdisk 0.4 =========
tmpdisk.obj driver loaded successfully
trying to add disk
disk size is not specified
10% from free RAM will be used, new DiskSize: 101 MB
operation compleated successfully
SOCKET_process_end: 00000010
SOCKET_process_end: 00000002
SOCKET_process_end: 00000012
SOCKET_process_end: 00000011
SOCKET_process_end: 00000014
SOCKET_process_end: 00000016
K : destroy app object
Thanks, What happened when you tried to run ZeroConf ?
Packet was sent, but nothing received?
Packet was sent, but nothing received?
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein
Where can I see it? ZeroConf has no window (?) and there is complete log. Do I need to run ZeroConf manually, regardless to autorun?hidnplayr wrote:Packet was sent, but nothing received?
Who is online
Users browsing this forum: Ahrefs [Bot] and 9 guests