Встроенные видеокарты Intel

Mon Feb 01, 2016 7:08 pm

Может, зависание вообще с Ethernet связано? Выключи в autorun.dat netcfg и zeroconf и попробуй оба ядра заново.

Mon Feb 01, 2016 7:23 pm

Отключил ничего не изменилось, но в паузе последнее сообщение
enter intel_dp_aux_wait и далее ETH сообщения.

P.S. Хотя нет т.к. rdsave не сделал

Mon Feb 01, 2016 7:33 pm

Это с ядром kernel_norelink_irq? А с транковым?

Mon Feb 01, 2016 8:16 pm

С отключенным Ethernet ядро не зависло, но видео подсистема с чем то пока ещё не справляется.

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6107
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295066000 Hz
K : Attach Interrupt 1 Handler 80039DD4
K : IRQ1 return code 80062DC4
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/@VOLUME Param:
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/SOUND.sys mapped to 80AE6000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AE7000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80AEC000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ ãª § , 10% á¢®¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
K : final: hub 80828540 port 1 status 0101 change 01
K : final: hub 80828540 port 2 status 0101 change 01
K : final: hub 80828540 port 3 status 0101 change 01
K : final: hub 80828540 port 4 status 0101 change 01
K : final: hub 80828540 port 6 status 0101 change 01
K : final: hub 80828540 port 7 status 0101 change 01
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : driver /sys/drivers/usbhid.sys mapped to 80AEA000
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 007E3240 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 007E2002 08085002 41010000 007E31E0
K : 007E3240 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 8FFF6000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : final: hub 80828540 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90224000

i915 v4.4 debug-1 build Jan 31 2016 12:27:16
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR

LOG: i915 v4.4 debug-1 build Jan 31 2016 12:27:16
sys_alloc 592 bytes
os_mmap 9010a000 131072 bytes
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902F32C0
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
enter intel_dp_aux_wait_done
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 90111188
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,349)@ 158.269112 -> 158.261784 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 90111188 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90112a58 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 90114270 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 9011dc90
<6>[drm] 9011dc00: FB ID: 50 (1)
<6>[drm] main_fb_obj 9011dc90 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90131000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 9011dc00: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Sink OUI: 00e04c
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Branch OUI: 00e04c
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] 90117770: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
enter gmbus_wait_idle
leave gmbus_wait_idle
enter gmbus_wait_idle
leave gmbus_wait_idle
enter gmbus_wait_idle
leave gmbus_wait_idle
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] looking for preferred mode on connector 41 0
<6>[drm] found mode 1920x1080
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1920x1080 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 9011dc90
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] init_display_kms allocate fb name 1
<6>[drm] Manufacturer: SDC Model 5441 Serial Number 0
<6>[drm] set mode 1366 768: crtc 21 connector eDP-1
fb:9011dc00 1366x768x pitch 5632 format 34325258
<6>[drm] Allocated atomic state 90140ef8
<6>[drm] 9011db90: blob ID: 49 (1)
<6>[drm] Added [CRTC:21] 90141028 state to 90140ef8
<6>[drm] 9011dc00: FB ID: 50 (3)
<6>[drm] Added [PLANE:18] 901412f8 state to 90140ef8
<6>[drm] 9011db90: blob ID: 49 (2)
<6>[drm] Set [MODE:1366x768] for CRTC state 90141028
<6>[drm] Link plane state 901412f8 to [CRTC:21]
<6>[drm] 9011dc00: FB ID: 50 (4)
<6>[drm] 9011dc00: FB ID: 50 (3)
<6>[drm] Set [FB:50] for plane state 901412f8
<6>[drm] Added [CONNECTOR:32] 901413f0 state to 90140ef8
<6>[drm] Adding all current connectors for [CRTC:21] to 90140ef8
<6>[drm] Link connector state 901413f0 to [NOCRTC]
<6>[drm] Link connector state 901413f0 to [CRTC:21]
<6>[drm] checking 90140ef8
<6>[drm] [CRTC:21] mode changed
<6>[drm] Updating routing for [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1] keeps [ENCODER:31:TMDS-31], now on [CRTC:21]
<6>[drm] [CRTC:21] needs all connectors, enable: y, active: y
<6>[drm] Adding all current connectors for [CRTC:21] to 90140ef8
<6>[drm] State 90140ef8 has 1 connectors for [CRTC:21]
<6>[drm] Adding all current connectors for [CRTC:21] to 90140ef8
<6>[drm] [CONNECTOR:32:eDP-1] checking for sink bpp constrains
<6>[drm] clamping display bpp (was 36) to EDID reported max of 18
<6>[drm] DP link computation with max lane count 2 max bw 270000 pixel clock 76300KHz
<6>[drm] DP link bw 0a rate select 00 lane count 2 clock 270000 bpp 18
<6>[drm] DP link bw required 137340 available 432000
<6>[drm] hw max bpp: 36, pipe bpp: 18, dithering: 1
<6>[drm] mismatch in dp_m_n (expected tu 64 gmch 2673519/8388608 link 148528/524288, found tu 64, gmch 2666878/8388608 link 148159/524288)
<6>[drm] mismatch in ips_enabled (expected 0, found 1)
<6>[drm] mismatch in ddi_pll_sel (expected 0x80000000, found 0x20000000)
<6>[drm] mismatch in dpll_hw_state.wrpll (expected 0x90280202, found 0x00000000)
<6>[drm] [CRTC:21][modeset] config 90141028 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 1
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2666878, gmch_n: 8388608, link_m: 148159, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] crtc timings: 76300 1366 1430 1478 1606 768 770 775 792, type: 0x48 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1366x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 1
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 536870912; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 enabled<6>[drm] FB:50, fb = 1366x768 format = 0x34325258<6>[drm] scaler:0 src (0, 0) 0x0 dst (0, 0) 0x0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] Added [CRTC:25] 90141408 state to 90140ef8
<6>[drm] Added [CRTC:29] 901416d8 state to 90140ef8
<6>[drm] [CRTC:21] has [PLANE:18] with fb 50
<6>[drm] [PLANE:18] visible 1 -> 1, off 1, on 1, ms 1
<6>[drm] commiting 90140ef8
<6>[drm]
<6>[drm] set backlight PWM = 0
<6>[drm] cpu backlight was enabled, disabling
enter drm_vblank_off
<6>[drm] crtc 0 : v 0x5 p(0,500)@ 158.948774 -> 158.938276 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=1, diff=132, hw=10243 hw_last=10111
enter wake_up
raise event
leave wake_up
leave drm_vblank_off
<6>[drm] disabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Turn eDP port A panel power off
<6>[drm] Wait for panel power off time
<6>[drm] mask b0000000 value 00000000 status 80000008 control abcd0000
<6>[drm] Wait complete
<6>[drm] disable WRPLL 1 (active 1, on? 1) for crtc 21
<6>[drm] disabling WRPLL 1
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76300 kHz framedur 16670406 linedur 21048
<6>[drm] disabling display
<6>[drm] Requesting to disable the power well
<6>[drm] Turn eDP port A panel power on
<6>[drm] Wait for panel power cycle
<6>[drm] mask b800000f value 00000000 status 08000001 control abcd0000
<6>[drm] Wait complete
<6>[drm] Wait for panel power on
<6>[drm] mask b000000f value 80000008 status 0000000a control abcd0003
<6>[drm] Wait complete
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000b
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Using signal levels 00000000
<6>[drm] Using vswing level 0
<6>[drm] Using pre-emphasis level 0
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] clock recovery OK
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Channel EQ done. DP Training successful
<6>[drm] enabling pipe A
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
<6>[drm] crtc 0 : v 0x7 p(0,-24)@ 159.823123 -> 159.823628 [e 1 us, 0 rep]
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm]
<6>[drm] pipe A
<6>[drm] set backlight PWM = 937
DRM Erroruncleared fifo underrun on pipe A
DRM ErrorCPU pipe A FIFO underrun
<6>[drm] PSR not supported by this panel
<6>[drm] Panel doesn't support DRRS
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,713)@ 159.838710 -> 159.823702 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=10245 hw_last=10245
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x5 p(0,713)@ 159.838720 -> 159.823712 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=10245 hw_last=10245
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x5 p(0,714)@ 159.838736 -> 159.823707 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=0, hw=10245 hw_last=10245
enter drm_wait_one_vblank
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 159.839910 -> 159.840373 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=134, diff=1, hw=10246 hw_last=10245
enter wake_up
raise event
leave wake_up
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
leave drm_wait_one_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-21)@ 159.839933 -> 159.840375 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=0, hw=10246 hw_last=10246
<6>[drm] Disabling FBC: disabled per chip default
<6>[drm] enabling vblank on crtc 0, ret: 0
<6>[drm] crtc 0 : v 0x7 p(0,-21)@ 159.839948 -> 159.840390 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=0, hw=10246 hw_last=10246
enter drm_wait_one_vblank
enter drm_handle_vblank
<6>[drm] crtc 0 : v 0x7 p(0,-22)@ 159.856580 -> 159.857043 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=135, diff=1, hw=10247 hw_last=10246
enter wake_up
raise event
leave wake_up
enter drm_handle_vblank_events
leave drm_handle_vblank_events
leave drm_handle_vblank
leave drm_wait_one_vblank
<6>[drm] disabling vblank on crtc 0
<6>[drm] crtc 0 : v 0x7 p(0,-21)@ 159.856603 -> 159.857045 [e 1 us, 0 rep]
<6>[drm] updating vblank count on crtc 0: current=136, diff=0, hw=10247 hw_last=10247
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [ENCODER:31:TMDS-31]
<6>[drm] [ENCODER:40:TMDS-40]
<6>[drm] [ENCODER:43:TMDS-43]
<6>[drm] [ENCODER:45:DP MST-45]
<6>[drm] [ENCODER:46:DP MST-46]
<6>[drm] [ENCODER:47:DP MST-47]
<6>[drm] 9011db90: blob ID: 49 (1)
<6>[drm] [CRTC:21]
<6>[drm] WRPLL 1
<6>[drm] WRPLL 2
<6>[drm] SPLL
<6>[drm] Clearing atomic state 90140ef8
<6>[drm] 9011dc00: FB ID: 50 (4)
<6>[drm] Freeing atomic state 90140ef8
<6>[drm] 9011dc00: FB ID: 50 (3)
<6>[drm] new mode 1366 x 768 pitch 5632
Set DISPLAY handler
<6>[drm] Enabling RC6 states: RC6 on
<6>[drm] Overclocking supported. Max: 1000MHz, Overclock max: 1000MHz
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
DRM ErrorUnclaimed register before interrupt
...

Mon Feb 01, 2016 8:34 pm

Лог с попыткой переключится на HDMI-A-1:1360x768

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6107
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295058000 Hz
K : Attach Interrupt 1 Handler 80039DD4
K : IRQ1 return code 80062DC4
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/@VOLUME Param:
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/SOUND.sys mapped to 80AE6000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AE7000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80AEC000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ ãª § , 10% á¢®¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
K : final: hub 80828540 port 2 status 0101 change 01
K : final: hub 80828540 port 3 status 0101 change 01
K : final: hub 80828540 port 4 status 0101 change 01
K : final: hub 80828540 port 6 status 0101 change 01
K : final: hub 80828540 port 7 status 0101 change 01
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 80AEA000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : driver /sys/drivers/usbhid.sys mapped to 900F6000
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80828540 port 4 status 0103 change 10
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90223000

i915 v4.4 debug-1 build Jan 31 2016 12:27:16
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 90109000 131072 bytes
cmdline -v HDMI-A-1:1360x768
i915.cmdline_mode =HDMI-A-1:1360x768

LOG: i915 v4.4 debug-1 build Jan 31 2016 12:27:16
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 902F22C0
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
enter intel_dp_aux_wait_done
i915_driver_thread
K : warning: relinking handler from IRQ7 to IRQ11
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1360x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901101b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,738)@ 124.911405 -> 124.895910 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901101b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90111a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901132a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 9011ccc0
<6>[drm] 9011cc30: FB ID: 50 (1)
<6>[drm] main_fb_obj 9011ccc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90130000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 9011cc30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Sink OUI: 00e04c
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] Branch OUI: 00e04c
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
enter intel_dp_aux_wait_done
leave intel_dp_aux_wait_done
<6>[drm] 901167a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
enter gmbus_wait_idle
leave gmbus_wait_idle
enter gmbus_wait_idle
leave gmbus_wait_idle
enter gmbus_wait_idle
leave gmbus_wait_idle
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 105:"1360x768" 60 84740 1360 1424 1568 1776 768 769 772 795 0x20 0x6
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1360x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1360x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 9011ccc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] use CRTC 9010f9e8 ID 21
<6>[drm] init_display_kms allocate fb name 1
K : Process - forced terminate PID: 0000001A [i915]
K : Page fault
K : EAX : 80041F50 EBX : 90117768 ECX : 0010BB00
K : EDX : 00000200 ESI : 80041F78 EDI : 90117798
K : EBP : 90108D54 EIP : 902B7A17 ESP : 90108D00
K : Flags : 00011006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 902B7A17 [ESP+04]: 00000008 [ESP+08]: 00011006
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 00000001
K : [ESP+24]: 00000000 [ESP+28]: 02000000 [ESP+32]: 90306450
K : Process - forced terminate PID: 00000002 [OS]
K : Page fault
K : EAX : 0010BB00 EBX : 00000115 ECX : 00000115
K : EDX : 00000047 ESI : 80827028 EDI : 8001D411
K : EBP : 8003D3BD EIP : 902B6C4F ESP : 80821D7C
K : Flags : 00210006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 902B6C4F [ESP+04]: 00000008 [ESP+08]: 00210006
K : [ESP+12]: 00000011 [ESP+16]: 00000001 [ESP+20]: 80821DA4
K : [ESP+24]: 00000000 [ESP+28]: 8003D3BD [ESP+32]: 00000115

Mon Feb 01, 2016 8:35 pm

Тогда ядро работает правильно, с зависанием при включённом Ethernet - к hidnplayr - причём желательно включить дублирование лога на экран и последние строчки перед зависанием, с остальными вопросами по видеодрайверу - к Serge.

Mon Feb 01, 2016 9:22 pm

Ещё выдержка из лога при "разрушении" окна программы.

Spoiler:

WARNING: at intel_display.c:1340
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
DRM Erroruncleared fifo underrun on pipe A
DRM ErrorCPU pipe A FIFO underrun
Set DISPLAY handler
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
CP866
CP866
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:17
out_len:17
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:17
out_len:17
UTF-8
UTF-8
Header field not found
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:39
out_len:39
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:39
out_len:39
Header field not found
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:36
out_len:36
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:36
out_len:36
Header field not found
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:66
out_len:66
UTF-8
iconv: something is wrong with stdcall iconv()
-10
in_len:66
out_len:66
K : destroy app object

А эти предупреждения ошибочные?

Spoiler:

WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
K : destroy app object
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
WARN_ON(!mutex_is_locked(&dev->struct_mutex))
WARNING: at intel_frontbuffer.c:152
CP866
CP866
HTTP GET error!
CP866
CP866
HTTP GET error!
CP866
CP866
HTTP GET error!
CP866
CP866
HTTP GET error!
CP866
CP866

Mon Feb 01, 2016 9:41 pm

Code: Select all

WARNING: at intel_display.c:1340
cursor on pipe A assertion failure (expected off, current on)

WARNING: at intel_display.c:1340
DRM Erroruncleared fifo underrun on pipe A
DRM ErrorCPU pipe A FIFO underrun

На эти можно не обращать внимания.
WARN_ON(!mutex_is_locked(&dev->struct_mutex)) эту я исправил.
откуда ошибки iconv() я не знаю.

Mon Feb 01, 2016 9:46 pm

Похоже использование функции ядра 18.14 (ожидание обратного хода луча) с видеодрайвером
приводит к ошибкам в приложении (приложение не работает) + остаются "артефакты" от других окон на экране.

P.S. Без видеодрайвера данная функция не приводит к таким результатам.

Mon Feb 01, 2016 10:32 pm

Kopa
Это в каком приложении ? Вероятно разрешение прерывания по обратному ходу луча, включило механизм с vga регистрами.

Mon Feb 01, 2016 10:36 pm

Serge wrote:Kopa
Это в каком приложении ? Вероятно разрешение прерывания по обратному ходу луча, включило механизм с vga регистрами.

Консольный тетрис. Убирал мерцание изображения.

Mon Feb 01, 2016 11:51 pm

Kopa
Проверь пожалуйста переключение на другой монитор.
http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-2.7z

Tue Feb 02, 2016 12:14 am

Готово.

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6107
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295040000 Hz
K : Attach Interrupt 1 Handler 80039DD4
K : IRQ1 return code 80062DC4
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AA9000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/NETWORK/NETCFG Param: A
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/RTL8169.sys mapped to 80AE8000
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: Detected chip: unknown RTL8169 clone
L: /SYS/NETWORK/@ZEROCONF Param:
Zero-config service loaded
L: /SYS/@VOLUME Param:
K : driver /sys/drivers/SOUND.sys mapped to 80AFE000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AFF000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/@SS Param: ASSM
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/TMPDISK Param: A0
K : final: hub 80827E50 port 1 status 0101 change 01
K : final: hub 80827E50 port 2 status 0101 change 01
K : final: hub 80827E50 port 3 status 0101 change 01
K : final: hub 80827E50 port 4 status 0101 change 01
K : final: hub 80827E50 port 6 status 0101 change 01
K : final: hub 80827E50 port 7 status 0101 change 01
K : driver /sys/drivers/tmpdisk.sys mapped to 80B06000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ ãª § , 10% á¢®¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : driver /sys/drivers/usbhid.sys mapped to 8FFFF000
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 00824002 08085002 41010000 008251E0
K : 00825180 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 90001000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : final: hub 80827E50 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : Attach Interrupt 11 Handler 80AE8CDC
RTL8169: Link change detected
RTL8169: Link is down
RTL8169: Link is down
RTL8169: init OK!
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: Link change detected
RTL8169: Link is up, phystatus=0x8B
Trying to contact DHCP server
No answer from DHCP server
No answer from DHCP server
IP assigned by DHCP server successfully
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 90291000

i915 v4.4.1 debug-2 build Feb 1 2016 23:27:22
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 9010f000 131072 bytes
cmdline -v HDMI-A-1:1366x768
i915.cmdline_mode =HDMI-A-1:1366x768

LOG: i915 v4.4.1 debug-2 build Feb 1 2016 23:27:22
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 903606C0
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
enter wake_up_all
raise event
leave wake_up_all
K : warning: relinking handler from IRQ7 to IRQ11
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1366x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901161b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,629)@ 135.50603 -> 135.37396 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901161b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90117a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901192a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 90122cc0
<6>[drm] 90122c30: FB ID: 50 (1)
<6>[drm] main_fb_obj 90122cc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90236000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 90122c30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Sink OUI: 00e04c
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Branch OUI: 00e04c
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] 9011c7a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 105:"1368x768" 60 85885 1368 1440 1584 1800 768 769 772 795 0x20 0x6
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1368x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1368x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 90122cc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] use CRTC 901159e8 ID 21
init_display_kms line 487
init_display_kms line 489
<6>[drm] init_display_kms allocate fb name 1
init_display_kms line 499
init_display_kms line 501
init_display_kms line 503
init_display_kms line 509
init_display_kms line 511
init_display_kms line 513
init_display_kms line 515
K : Process - forced terminate PID: 0000001C [i915]
K : Page fault
K : EAX : 80041F50 EBX : 9011D768 ECX : 0010BB00
K : EDX : 00000200 ESI : 80041F78 EDI : 9011D798
K : EBP : 9010ED70 EIP : 90325F57 ESP : 9010ED2C
K : Flags : 00011006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 90325F57 [ESP+04]: 00000008 [ESP+08]: 00011006
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 00000203
K : [ESP+24]: 00000000 [ESP+28]: 02000000 [ESP+32]: 00001282
K : Process - forced terminate PID: 00000002 [OS]
K : Page fault
K : EAX : 0010BB00 EBX : 00000132 ECX : 00000132
K : EDX : 0000003F ESI : 80827028 EDI : 8001D411
K : EBP : 8003D3BD EIP : 90324F0F ESP : 80821D88
K : Flags : 00210006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 90324F0F [ESP+04]: 00000008 [ESP+08]: 00210006
K : [ESP+12]: 00000000 [ESP+16]: 8003D3BD [ESP+20]: 00000132
K : [ESP+24]: 80827028 [ESP+28]: 8003A1FF [ESP+32]: 80827028

Tue Feb 02, 2016 12:17 am

Лог с отключенным сетевым адаптером (на всякий случай)

Spoiler:

K : HPET caps 8086A701
K : using mwait for idle loop
K : kernel SVN r6107
K : 4 CPU detected
K : driver /rd/1/drivers/vidintel.sys mapped to 8098A000
Intel videocard detected, PciId=8086:0A16, which is unknown
K : driver /sys/drivers/EHCI.sys mapped to 80990000
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 809908E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : cpu frequency 2295064000 Hz
K : Attach Interrupt 1 Handler 80039DD4
K : IRQ1 return code 80062DC4
K : driver /rd/1/drivers/PS2MOUSE.SYS mapped to 80AA0000
K : Attach Interrupt 12 Handler 80AA0546
K : EHCI 809950A4: status of port 0 changed to 00001803
L: /SYS/SETUP Param: BOOT
L: /SYS/LOADDRV Param: RDC
K : driver /sys/drivers/RDC.sys mapped to 80AAE000
L: /SYS/ESKIN Param:
L: /SYS/@ICON Param:
L: /SYS/@TASKBAR Param:
L: /SYS/@DOCKY Param:
L: /SYS/@VOLUME Param:
K : EHCI 809950A4 port 0 state is 00001801
K : EHCI 809950A4: port 0 has HS or FS device, resetting
K : driver /sys/drivers/SOUND.sys mapped to 80AE6000
Detecting hardware...
No compatible PCI soundcard found!
Loading SB16
K : driver /sys/drivers/SB16.sys mapped to 80AE7000
detecting hardware...
exiting... May be some problems found?
K : destroy app object
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
K : driver /sys/drivers/tmpdisk.sys mapped to 80AEC000
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ìë© €šáª
¥£® à §¬¥à ¥ ãª § , 10% á¢®¡®€®© ¡ã€¥â šá¯®«ì§®¢ ®
à §¬¥à €šáª ¡ã€¥â: 244 MB
®¯¥à æšï ãá¯¥è® § ¢¥àè¥
K : EHCI 809950A4 status of port 0 is 00001005
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
K : final: hub 80828540 port 1 status 0101 change 01
K : final: hub 80828540 port 2 status 0101 change 01
K : final: hub 80828540 port 3 status 0101 change 01
K : final: hub 80828540 port 4 status 0101 change 01
K : final: hub 80828540 port 6 status 0101 change 01
K : final: hub 80828540 port 7 status 0101 change 01
K : device descriptor: 12 01 10 01 00 00 00 08 33 33 33 33 01 00 00 00 00 01
K : found USB device with ID 3333:3333, 1 configuration(s)
K : config descriptor: 09 02 3B 00 02 01 00 A0 32 09 04 00 00 01 03 01 01 00 09 21 10 01 00 01 22 3F 00 07 05 81 03 08 00 0A 09 04 01 00 01 03 01 02 00 09 21 10 01 00 01 22 49 00 07 05 82 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/01
K : driver /sys/drivers/usbhid.sys mapped to 80AEA000
K : USB HID device detected
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : TD failed:
K : 007E3240 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 007E2002 08085002 41010000 007E31E0
K : 007E3240 005F8FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 01 09 06 A1 01 05 07 19 E0 29 E7 15 00 25 01 75 01 95 08 81 02 95 01 75 08 81 01 95 05 75 01 05 08 19 01 29 05 91 02 95 01 75 03 91 01 95 06 75 08 15 00 25 68 05 07 19 00 29 68 81 00 C0
K : report descriptor: 06 01 00 09 02 A1 01 05 09 19 01 29 05 15 00 25 01 95 05 75 01 81 02 95 01 75 03 81 03 05 01 09 01 A1 00 09 30 09 31 15 81 25 7F 75 08 95 02 81 06 C0 09 38 95 01 81 06 09 3C 15 00 25 01 75 01 95 01 B1 22 95 07 B1 01 C0
K : device descriptor: 12 01 10 02 00 00 00 40 51 09 66 16 01 00 01 02 03 01
K : found USB device with ID 0951:1666, 1 configuration(s)
K : config descriptor: 09 02 20 00 01 01 00 80 FA 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 FF 07 05 02 02 00 02 FF
K : USB interface class/subclass/protocol = 08/06/50
K : driver /sys/drivers/usbstor.sys mapped to 8FFF6000
K : USB mass storage device detected
K : 1 logical unit(s)
K : media is ready
K : 0 attempts, 0 ticks
K : peripheral device type is 00
K : direct-access mass storage device detected
K : sector size is 512, last sector is 60437491
K : final: hub 80828540 port 3 status 0303 change 10
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
K : driver /tmp0/1/i915.dll mapped to 9028B000

i915 v4.4.1 debug-2 build Feb 1 2016 23:27:22
usage: i915 [options]
-f
--fbsize <0-9> Set framebuffer size in megabytes (default: 16)
--rc6 <-1,0-7> Enable power-saving render C-state 6.
Different stages can be selected via bitmask values
(0 = disable; 1 = enable rc6; 2 = enable deep rc6;
4 = enable deepest rc6).
For example, 3 would enable rc6 and deep rc6,
and 7 would enable everything.
default: -1 (use per-chip default)
--fbc <-1,0,1> Enable frame buffer compression for power savings
(default: -1 (use per-chip default))
-l
--log <path> path to log file
-m
--mode <WxHxHz> set videomode
-v
--video <CONNECTOR>:<xres>x<yres>[M][R][-<bpp>][@<refresh>][m][eDd]
set videomode for CONNECTOR
sys_alloc 32 bytes
os_mmap 90109000 131072 bytes
cmdline -v HDMI-A-1:1366x768
i915.cmdline_mode =HDMI-A-1:1366x768

LOG: i915 v4.4.1 debug-2 build Feb 1 2016 23:27:22
PCI device 8086:9c43 bus:0 devfn:f8
PCI device 8086:a16 bus:0 devfn:10
PCI device 8086:a04 bus:0 devfn:0
<6>SMBIOS 2.7 present.
<7>DMI: Dell Inc. Inspiron 3537/028XKX, BIOS A06 09/27/2013
<6>[drm] device 8086:a16
<6>[drm]
<6>[drm] i915 device info: gen=7, pciid=0x0a16 rev=0x09 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,<6>[drm] Found LynxPoint LP PCH
<6>[drm] Memory usable by graphics device = 2048M
<6>[drm] GMADR size = 256M
<6>[drm] GTT stolen size = 64M
<6>[drm] ppgtt mode: 1
<6>[drm] slice total: 0
<6>[drm] subslice total: 0
<6>[drm] subslice per slice: 0
<6>[drm] EU total: 0
<6>[drm] EU per subslice: 0
<6>[drm] has slice power gating: n
<6>[drm] has subslice power gating: n
<6>[drm] has EU power gating: n
<6>[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
<6>[drm] Driver supports precise vblank timestamp query.
<6>[drm] Set default to SSC at 120000 kHz
<6>[drm] Using VBT from PCI ROM: $VBT HASWELL d
<6>[drm] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
<6>[drm] crt_ddc_bus_pin: 2
<6>[drm] DRRS supported mode is seamless
<6>[drm] Found panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1366x768" 0 76300 1366 1430 1478 1606 768 770 775 792 0x8 0xa
<6>[drm] VBT initial LVDS value 200300
<6>[drm] VBT backlight PWM modulation frequency 200 Hz, active high, min brightness 13, level 255
<6>[drm] Found SDVO panel mode in BIOS VBT tables:
<6>[drm] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
<6>[drm] No SDVO device info is found in VBT
<6>[drm] DRRS State Enabled:0
<6>[drm] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
<6>[drm] VBT HDMI level shift for port A: 0
<6>[drm] Port B VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
<6>[drm] VBT HDMI level shift for port B: 7
<6>[drm] Memory reserved for graphics device: 65536K, usable: 64512K
<6>[drm] enabling always-on
<6>[drm] enabling display
<6>[drm] irq=7
K : Attach Interrupt 7 Handler 9035A6C0
<6>[drm] Primary WM0 latency 20 (2.0 usec)
<6>[drm] Primary WM1 latency 4 (2.0 usec)
<6>[drm] Primary WM2 latency 36 (18.0 usec)
<6>[drm] Primary WM3 latency 90 (45.0 usec)
<6>[drm] Primary WM4 latency 160 (80.0 usec)
<6>[drm] Sprite WM0 latency 20 (2.0 usec)
<6>[drm] Sprite WM1 latency 4 (2.0 usec)
<6>[drm] Sprite WM2 latency 36 (18.0 usec)
<6>[drm] Sprite WM3 latency 90 (45.0 usec)
<6>[drm] Sprite WM4 latency 160 (80.0 usec)
<6>[drm] Cursor WM0 latency 20 (2.0 usec)
<6>[drm] Cursor WM1 latency 4 (2.0 usec)
<6>[drm] Cursor WM2 latency 36 (18.0 usec)
<6>[drm] Cursor WM3 latency 90 (45.0 usec)
<6>[drm] Cursor WM4 latency 160 (80.0 usec)
<6>[drm] 3 display pipes available.
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] Max CD clock rate: 450000 kHz
<6>[drm] Max dotclock rate: 450000 kHz
<6>[drm] Adding eDP connector on port A
<6>[drm] cur t1_t3 2000 t8 0 t9 2000 t10 500 t11_t12 6000
<6>[drm] vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
<6>[drm] panel power up delay 200, power down delay 50, power cycle delay 600
<6>[drm] backlight on delay 1, off delay 200
<6>[drm] registering DPDDC-A bus for
<6>[drm] Turning eDP port A VDD on
<6>[drm] PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
i915_driver_thread
enter wake_up_all
raise event
leave wake_up_all
K : warning: relinking handler from IRQ7 to IRQ11
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] DPCD: 11 0a 82 01 00 00 01 80 02 00 00 00 00 01 00
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Display Port TPS3 support: source yes, sink no
<6>[drm] panel power sequencer register settings: PP_ON 0x7d00001, PP_OFF 0x1f40001, PP_DIV 0x4af06
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] VBT doesn't support DRRS
<6>[drm] Connector eDP-1 backlight initialized, enabled, brightness 937/937
<6>[drm] cmdline mode for connector HDMI-A-1 1366x768@60Hz
<6>[drm] Adding DP connector on port C
<6>[drm] registering DPDDC-C bus for
<6>[drm] [CRTC:21] hw state readout: enabled
<6>[drm] [CRTC:25] hw state readout: disabled
<6>[drm] [CRTC:29] hw state readout: disabled
<6>[drm] WRPLL 1 hw state readout: crtc_mask 0x00000001, on 1
<6>[drm] WRPLL 2 hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] SPLL hw state readout: crtc_mask 0x00000000, on 0
<6>[drm] [ENCODER:31:TMDS-31] hw state readout: enabled, pipe A
<6>[drm] [ENCODER:40:TMDS-40] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:43:TMDS-43] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:45:DP MST-45] hw state readout: disabled, pipe A
<6>[drm] [ENCODER:46:DP MST-46] hw state readout: disabled, pipe B
<6>[drm] [ENCODER:47:DP MST-47] hw state readout: disabled, pipe C
<6>[drm] [CONNECTOR:32:eDP-1] hw state readout: enabled
<6>[drm] [CONNECTOR:41:HDMI-A-1] hw state readout: disabled
<6>[drm] [CONNECTOR:44:DP-1] hw state readout: disabled
<6>[drm] [CONNECTOR:48:HDMI-A-2] hw state readout: disabled
<6>[drm] Set [MODE:1366x768] for CRTC state 901101b8
<6>[drm] crtc 21: hwmode: htotal 1606, vtotal 792, vdisplay 768
<6>[drm] crtc 21: clock 76489 kHz framedur 16629214 linedur 20996
<6>[drm] crtc 0 : v 0x5 p(0,724)@ 127.681157 -> 127.665955 [e 1 us, 0 rep]
<6>[drm] [CRTC:21][setup_hw_state] config 901101b8 for pipe A
<6>[drm] cpu_transcoder: D
<6>[drm] pipe bpp: 18, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 1, lanes: 2, gmch_m: 2673519, gmch_n: 8388608, link_m: 148528, link_n: 524288, tu: 64
<6>[drm] dp: 1, lanes: 2, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"1366x768" 60 76489 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] crtc timings: 76489 1366 1430 1478 1606 768 770 775 792, type: 0x40 flags: 0x9
<6>[drm] port clock: 270000
<6>[drm] pipe src size: 1024x768
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x05560300, enabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 2147483648; dpll_hw_state: wrpll: 0x90280202 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:18 plane: 0.0 idx: 0 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:20 plane: 0.1 idx: 1 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:22 plane: 0.1 idx: 2 disabled, scaler_id = 0
<6>[drm] [CRTC:25][setup_hw_state] config 90111a88 for pipe B
<6>[drm] cpu_transcoder: B
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:23 plane: 1.0 idx: 3 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:24 plane: 1.2 idx: 4 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:26 plane: 1.1 idx: 5 disabled, scaler_id = 0
<6>[drm] [CRTC:29][setup_hw_state] config 901132a0 for pipe C
<6>[drm] cpu_transcoder: C
<6>[drm] pipe bpp: 0, dithering: 0
<6>[drm] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
<6>[drm] dp: 0, lanes: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
<6>[drm] audio: 0, infoframes: 0
<6>[drm] requested mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] adjusted mode:
<6>[drm] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
<6>[drm] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
<6>[drm] port clock: 0
<6>[drm] pipe src size: 0x0
<6>[drm] num_scalers: 0, scaler_users: 0x0, scaler_id: 0
<6>[drm] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
<6>[drm] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
<6>[drm] ips: 0
<6>[drm] double wide: 0
<6>[drm] ddi_pll_sel: 0; dpll_hw_state: wrpll: 0x0 spll: 0x0
<6>[drm] planes on this crtc
<6>[drm] STANDARD PLANE:27 plane: 2.0 idx: 6 disabled, scaler_id = 0
<6>[drm] CURSOR PLANE:28 plane: 2.3 idx: 7 disabled, scaler_id = 0
<6>[drm] STANDARD PLANE:30 plane: 2.1 idx: 8 disabled, scaler_id = 0
<6>[drm] pipe A with fb: size=1024x768@32, offset=0, pitch 10240, size 0x1000000
<6>[drm] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=1000000
<6>[drm] offset=0x0, size=16777216
<6>[drm] initial plane fb obj 9011ccc0
<6>[drm] 9011cc30: FB ID: 50 (1)
<6>[drm] main_fb_obj 9011ccc0 gtt_offset 0x00000000
<6>[drm] reserving preallocated space: 0 + 1000000
<6>[drm] clearing unused GTT space: [1000000, 7ffff000]
<6>[drm] Allocated pde space (2M) at GTT entry: 7fdf0
<6>[drm] Adding PPGTT at offset 7fdf0000
sys_alloc 136 bytes
os_mmap 90230000 131072 bytes
<6>[drm] HW context support initialized
<6>[drm] render ring hws offset: 0x01011000
<6>[drm] render ring pipe control offset: 0x01032000
<6>[drm] bsd ring hws offset: 0x01033000
<6>[drm] blitter ring hws offset: 0x01054000
<6>[drm] video enhancement ring hws offset: 0x01075000
<6>[drm] Current CD clock rate: 450000 kHz
<6>[drm] found possible fb from plane A
<6>[drm] pipe B not active or no fb, skipping
<6>[drm] pipe C not active or no fb, skipping
<6>[drm] checking plane A for BIOS fb
<6>[drm] pipe A area: 1366x768, bpp: 32, size: 7864320
<6>[drm] fb big enough for plane A (16777216 >= 7864320)
<6>[drm] pipe B not active, skipping
<6>[drm] pipe C not active, skipping
<6>[drm] 9011cc30: FB ID: 50 (2)
<6>[drm] using BIOS fb for initial console
<6>[drm] [CONNECTOR:32:eDP-1]
<6>[drm] [CONNECTOR:32:eDP-1]
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Sink OUI: 00e04c
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Branch OUI: 00e04c
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] 901167a0: blob ID: 35 (1)
<6>[drm] eDP-1: Assigning EDID-1.4 digital sink color depth as 6 bpc.
<6>[drm] ELD: no CEA Extension found
<6>[drm] [CONNECTOR:32:eDP-1] probed modes :
<6>[drm] Modeline 33:"1366x768" 60 76300 1366 1430 1478 1606 768 770 775 792 0x48 0x9
<6>[drm] Modeline 34:"1366x768" 40 50800 1366 1430 1478 1606 768 770 775 792 0x40 0x9
<6>[drm] [CONNECTOR:41:HDMI-A-1]
<6>[drm] [CONNECTOR:41:HDMI-A-1]
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
enter wake_up_all
raise event
leave wake_up_all
<6>[drm] Monitor has basic audio support
<6>[drm] HDMI-A-1: HDMI sink does deep color 30.
<6>[drm] HDMI-A-1: HDMI sink does deep color 36.
<6>[drm] HDMI-A-1: Assigning HDMI sink color depth as 12 bpc.
<6>[drm] HDMI-A-1: HDMI sink does YCRCB444 in deep color.
<6>[drm] ELD monitor MStar Demo
<6>[drm] HDMI: DVI dual 0, max TMDS clock 225, latency present 0 0, video latency 192 1, audio latency 4 65
<6>[drm] ELD size 36, SAD count 2
<6>[drm] [CONNECTOR:41:HDMI-A-1] probed modes :
<6>[drm] Modeline 52:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
<6>[drm] Modeline 89:"1920x1080" 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 68:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 83:"1920x1080i" 60 74250 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 95:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 102:"1920x1080i" 60 74176 1920 2008 2052 2200 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 75:"1920x1080" 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 57:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x15
<6>[drm] Modeline 80:"1920x1080i" 50 74250 1920 2448 2492 2640 1080 1084 1094 1125 0x40 0x20015
<6>[drm] Modeline 77:"1920x1080" 30 74250 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 99:"1920x1080" 30 74176 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 76:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 87:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 88:"1920x1080" 24 74250 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 98:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x5
<6>[drm] Modeline 103:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x1c005
<6>[drm] Modeline 104:"1920x1080" 24 74176 1920 2558 2602 2750 1080 1084 1089 1125 0x40 0x4005
<6>[drm] Modeline 58:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
<6>[drm] Modeline 61:"1440x900" 60 88750 1440 1488 1520 1600 900 903 909 926 0x40 0x9
<6>[drm] Modeline 105:"1368x768" 60 85885 1368 1440 1584 1800 768 769 772 795 0x20 0x6
<6>[drm] Modeline 53:"1360x768" 60 85500 1360 1424 1536 1792 768 771 777 795 0x40 0x5
<6>[drm] Modeline 67:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 81:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 82:"1280x720" 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 94:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
<6>[drm] Modeline 100:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 101:"1280x720" 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 56:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
<6>[drm] Modeline 78:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x1c005
<6>[drm] Modeline 79:"1280x720" 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x4005
<6>[drm] Modeline 60:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
<6>[drm] Modeline 59:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
<6>[drm] Modeline 55:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa
<6>[drm] Modeline 74:"720x576i" 50 13500 720 732 795 864 576 580 586 625 0x40 0x101a
<6>[drm] Modeline 90:"720x480" 60 27027 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 54:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa
<6>[drm] Modeline 96:"720x480i" 60 13514 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 69:"720x480i" 60 13500 720 739 801 858 480 488 494 525 0x40 0x101a
<6>[drm] Modeline 63:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] Modeline 65:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1]
<6>[drm] [CONNECTOR:44:DP-1] disconnected
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] [CONNECTOR:48:HDMI-A-2]
<6>[drm] Live status not up!<6>[drm] [CONNECTOR:48:HDMI-A-2] disconnected
<6>[drm]
<6>[drm] connector 32 enabled? yes
<6>[drm] connector 41 enabled? yes
<6>[drm] connector 44 enabled? no
<6>[drm] connector 48 enabled? no
<6>[drm] looking for cmdline mode on connector eDP-1
<6>[drm] looking for preferred mode on connector eDP-1 0
<6>[drm] connector eDP-1 on pipe A [CRTC:21]: 1366x768
<6>[drm] connector HDMI-A-1 has no encoder or crtc, skipping
<6>[drm] connector DP-1 not enabled, skipping
<6>[drm] connector HDMI-A-2 not enabled, skipping
<6>[drm] fallback: Not all outputs enabled
<6>[drm] Enabled: 1, detected: 2
<6>[drm] Not using firmware configuration
<6>[drm] looking for cmdline mode on connector 32
<6>[drm] looking for preferred mode on connector 32 0
<6>[drm] found mode 1366x768
<6>[drm] looking for cmdline mode on connector 41
<6>[drm] found mode 1368x768
<6>[drm] picking CRTCs for 8192x8192 config
<6>[drm] desired mode 1366x768 set on crtc 21 (0,0)
<6>[drm] desired mode 1368x768 set on crtc 25 (0,0)
<6>[drm] re-using BIOS fb
<6>[drm] allocated 1024x768 fb: 0x00000000, bo 9011ccc0
Info drm_fb_helper_single_fb_probe fb0: inteldrmfb frame buffer device
<6>[drm]
<6>[drm] use CRTC 9010f9e8 ID 21
init_display_kms line 487
init_display_kms line 489
<6>[drm] init_display_kms allocate fb name 1
init_display_kms line 499
init_display_kms line 501
init_display_kms line 503
init_display_kms line 509
init_display_kms line 511
init_display_kms line 513
init_display_kms line 515
K : Process - forced terminate PID: 00000019 [i915]
K : Page fault
K : EAX : 80041F50 EBX : 90117768 ECX : 0010BB00
K : EDX : 00000200 ESI : 80041F78 EDI : 90117798
K : EBP : 90108D70 EIP : 9031FF57 ESP : 90108D2C
K : Flags : 00011006 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 9031FF57 [ESP+04]: 00000008 [ESP+08]: 00011006
K : [ESP+12]: 00000000 [ESP+16]: 00000000 [ESP+20]: 00000203
K : [ESP+24]: 00000000 [ESP+28]: 02000000 [ESP+32]: 00001282
K : Process - forced terminate PID: 00000002 [OS]
K : Page fault
K : EAX : 0010BB00 EBX : 00000116 ECX : 00000116
K : EDX : 00000043 ESI : 80827028 EDI : 8001D411
K : EBP : 8003D3BD EIP : 9031EF0F ESP : 80821D88
K : Flags : 00210002 CS : 00000008 (kernel)
K : Stack dump:
K : [ESP+00]: 9031EF0F [ESP+04]: 00000008 [ESP+08]: 00210002
K : [ESP+12]: 00000000 [ESP+16]: 8003D3BD [ESP+20]: 00000116
K : [ESP+24]: 80827028 [ESP+28]: 8003A1FF [ESP+32]: 80827028a

Tue Feb 02, 2016 12:47 am

Kopa
Ошибку в обработчике прерывания я исправил.
http://ftp.kolibrios.org/users/Serge/ne ... 1-dbg-3.7z

Встроенные видеокарты Intel

Who is online