Board.KolibriOS.org

Официальный форум KolibriOS
Текущее время: Вс июн 25, 2017 11:40 pm

Часовой пояс: UTC+03:00




Начать новую тему  Ответить на тему  [ 57 сообщений ]  На страницу Пред. 1 2 3 4 След.
Автор Сообщение
 Заголовок сообщения: Re: RTL8169
СообщениеДобавлено: Вт апр 08, 2014 10:32 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
Вот:


Вложения:
PCIDEV.TXT [1.96 КБ]
71 скачивание
BOARDLOG.TXT [8.98 КБ]
59 скачиваний
Вернуться к началу
 Заголовок сообщения: Re: RTL8169
СообщениеДобавлено: Вт апр 08, 2014 10:49 pm 
Не в сети
Mentor/Kernel Developer
Аватара пользователя

Зарегистрирован: Пт июн 30, 2006 9:01 am
Сообщения: 1211
Fixed some known bugs, please try nightbuild #4804

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein


Вернуться к началу
 Заголовок сообщения: Re: RTL8169
СообщениеДобавлено: Вт апр 08, 2014 11:39 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
1. Теперь Интернет работает! Спасибо.
2. Теперь ноутбук перезагружается нормально.
Иногда во время загрузки в WebView сайта ноутбук зависает (полностью). Иногда страницы просто не грузятся (пишет ошибку), потом опять грузятся, потом опять не грузятся.


Вложения:
BOARDLOG2.TXT [17.83 КБ]
58 скачиваний
Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт апр 10, 2014 7:58 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
После 2-3 минут работы с браузером зависает ПК. Не знаю с драйвером или с WebView-ом это связанно, но это неприятно и происходит постоянно. Зависает ПК и ничего кроме кнопки RESET не помогает. Браузер реагирует на нажатие кнопок вверх/вниз и прокручивает окно, другие кнопки не реагируют. Так как ПК зависает не получается сохранить логи, но я переписал последнюю страничку BOARD логов на листик, вот она:
Спойлер: Показать
Chunkline begins at 0x001BBED8
Chunk of 0x00001238 bytes
Resizing buffer 0x001AB000, it will now be 86595 bytes
New buffer = 0x001AB000
Received 4596 bytes
Chunkline begins at 0x001BD110
Chunk of 0x00001F99 bytes
Resizing buffer 0x001AB000, it will now be 94608 bytes
New buffer = 0x001AB000
Received 1398 bytes
Received 1398 bytes
Received 973 bytes
Chunkline begins at 0x001BF0A9
Chunk of 0x00000000 bytes
We got all the data! (82089 bytes)
HTTP_free: 0x0017F000


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт апр 10, 2014 8:05 pm 
Не в сети
Mentor/Kernel Developer
Аватара пользователя

Зарегистрирован: Пт июн 30, 2006 9:01 am
Сообщения: 1211
This part of the log looks OK, did you also check 'kernel' tab of the debug board?

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт апр 10, 2014 8:54 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
Вот kernel:
Спойлер: Показать
K: report descriptor: 06 00 FF 09 01 A1 01 85 10 75 08 95 06
K: device descriptor: 12 01 00 02 EF 02 01 40 C8 0A 49 C3 15
K: found USB device with ID 0AC8:C349, 1 configuration(s)
K: config descriptor: 09 02 E1 01 02 01 00 80 A0 08 0B 00 02
K: USB interface class/subclass/protocol = 0E/01/00
K: failed to load class driver
K: USB interface class/subclass/protocol = 0E/02/00
K: failed to load class driver
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: note: altornate setting with 0E/02/00
K: Attach Interrupt 10 Handler 80AB9B20


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт апр 10, 2014 9:06 pm 
Не в сети
Mentor/Kernel Developer
Аватара пользователя

Зарегистрирован: Пт июн 30, 2006 9:01 am
Сообщения: 1211
Hmm no errors there too.
I will try to reproduce the error on a test machine at home.

Just dont expect a fix tomorrow ;)
PS: if you dont want me to forget about this bug (because it really annoys you), please make a bug report on bugs.kolibrios.org

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт апр 10, 2014 9:18 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
ok, added.


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт июл 10, 2014 8:01 pm 
Не в сети

Зарегистрирован: Вт апр 08, 2014 9:25 pm
Сообщения: 12
Проблема все еще актуальна. После 2-3 минут работы с браузером зависает ПК. Не знаю с драйвером или с WebView-ом это связанно, но это неприятно и происходит постоянно. Зависает ПК и ничего кроме кнопки RESET не помогает. Браузер реагирует на нажатие кнопок вверх/вниз и прокручивает окно, другие кнопки не реагируют.


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Ср июл 16, 2014 4:13 pm 
Не в сети

Зарегистрирован: Сб ноя 30, 2013 4:07 pm
Сообщения: 39
MarkTok/All
Ref; viewtopic.php?f=29&t=664&start=30#p56703
PCIDEV-2.txt :
" Network - misc
10ec 8168 02 00 00 06 02 00 00 0a REALTEK SEMICONDUCTOR CORP. Network - Ethernet "

If 8168 causes problem in Linux, e.g.,
http://wiki.linuxmce.org/index.php/Realtek_8168
http://www.linuxquestions.org/questions ... 175490602/
http://crunchbang.org/forums/viewtopic.php?id=26545
perhaps not surprizing similar problem(s) are seen in KolibriOS?


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Ср июл 16, 2014 5:07 pm 
Не в сети
Mentor/Kernel Developer
Аватара пользователя

Зарегистрирован: Пт июн 30, 2006 9:01 am
Сообщения: 1211
buyerninety писал(а):
perhaps not surprizing similar problem(s) are seen in KolibriOS?


Yes the RTL8169 driver has been based on r8169.c from linux.

I have only one RTL8168 card (PCI express) but I have no motherboard with PCI express available at the moment for testing.
Sorry guys :)

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Чт июл 17, 2014 6:54 pm 
Не в сети
Kernel Developer
Аватара пользователя

Зарегистрирован: Чт сен 03, 2009 1:52 pm
Сообщения: 1593
MarkTok писал(а):
Проблема все еще актуальна. После 2-3 минут работы с браузером зависает ПК. Не знаю с драйвером или с WebView-ом это связанно, но это неприятно и происходит постоянно. Зависает ПК и ничего кроме кнопки RESET не помогает. Браузер реагирует на нажатие кнопок вверх/вниз и прокручивает окно, другие кнопки не реагируют.

Для начала проверь r5001, я исправила там одну ошибку в сетевом стеке, hidnplayr отключил полуэкспериментальный код IPv6. Если зависания продолжатся, нужно больше информации: при загрузке на синем экране включи опцию "[c] Дублировать дебаг-вывод на экран монитора:" - с ней ядро будет печатать отладочную информацию поверх всех окон - и скопируй сюда последние несколько строчек перед зависанием.

_________________
Сделаем мир лучше!


Вернуться к началу
 Заголовок сообщения: "Ночные" сборки KolibriOS
СообщениеДобавлено: Сб янв 10, 2015 12:36 am 
Не в сети

Зарегистрирован: Пн мар 27, 2006 6:33 am
Сообщения: 526
Логи с RTL8169
Спойлер: Показать
K : using mwait for idle loop
K : kernel SVN r5365
K : 4 CPU detected
Intel videocard detected, PciId=8086:0A16, which is unknown
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 80A988E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : EHCI 80A9D0A4: status of port 0 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C564
K : EHCI 80A9D0A4 port 0 state is 00001801
K : EHCI 80A9D0A4: port 0 has HS or FS device, resetting
K : Attach Interrupt 12 Handler 80AA8546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: probe
RTL8169: init_board
RTL8169: init_board: TxConfig & 0x7c800000 = 0x44800000
RTL8169: init_board: chipset=2
RTL8169: MAC = 74-86-7A-59-63-87
RTL8169: hw_PHY_config: priv.mcfg=3, priv.pcfg=3
L: /SYS/NETWORK/ZEROCONF Param:
K : EHCI 80A9D0A4 status of port 0 is 00001005
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
K : final: hub 80828AA0 port 3 status 0101 change 01
K : final: hub 80828AA0 port 4 status 0101 change 01
K : final: hub 80828AA0 port 6 status 0101 change 01
K : final: hub 80828AA0 port 7 status 0101 change 01
L: /SYS/@PANEL Param:
RTL8169: Set MAC Reg C+CR Offset 0x82h = 0x01h
L: /SYS/@DOCKY Param:
RTL8169: Waiting for auto-negotiation to complete
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
L: /SYS/SEARCHAP Param:
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : final: hub 80828AA0 port 4 status 0103 change 10
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: auto-negotiation complete
RTL8169: resetting
RTL8169: init_ring
RTL8169: hw_start
RTL8169: Attaching int handler to irq B
K : Attach Interrupt 11 Handler 80ABA558
RTL8169: Waiting for chip to reset... RTL8169: done!
RTL8169: Set MAC Reg C+CR Offset 0xE0: bit-3
RTL8169: set_rx_mode
RTL8169: init OK!
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0020
Trying to contact DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
No answer from DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90008000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90008000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
Link LocRTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
al IP assigned: 169.254.47.143
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 4084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
Exiting
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100


Спойлер: Показать
K : using mwait for idle loop
K : kernel SVN r5365
K : 4 CPU detected
Intel videocard detected, PciId=8086:0A16, which is unknown
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 80A988E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : EHCI 80A9D0A4: status of port 0 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C564
K : EHCI 80A9D0A4 port 0 state is 00001801
K : EHCI 80A9D0A4: port 0 has HS or FS device, resetting
K : Attach Interrupt 12 Handler 80AA8546
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: probe
RTL8169: init_board
RTL8169: init_board: TxConfig & 0x7c800000 = 0x44800000
RTL8169: init_board: chipset=2
RTL8169: MAC = 74-86-7A-59-63-87
RTL8169: hw_PHY_config: priv.mcfg=3, priv.pcfg=3
L: /SYS/NETWORK/ZEROCONF Param:
K : EHCI 80A9D0A4 status of port 0 is 00001005
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
K : final: hub 80828AA0 port 3 status 0101 change 01
K : final: hub 80828AA0 port 4 status 0101 change 01
K : final: hub 80828AA0 port 6 status 0101 change 01
K : final: hub 80828AA0 port 7 status 0101 change 01
L: /SYS/@PANEL Param:
RTL8169: Set MAC Reg C+CR Offset 0x82h = 0x01h
L: /SYS/@DOCKY Param:
RTL8169: Waiting for auto-negotiation to complete
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : final: hub 80828AA0 port 6 status 0503 change 10
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: auto-negotiation complete
RTL8169: resetting
RTL8169: init_ring
RTL8169: hw_start
RTL8169: Attaching int handler to irq B
K : Attach Interrupt 11 Handler 80ABA558
RTL8169: Waiting for chip to reset... RTL8169: done!
RTL8169: Set MAC Reg C+CR Offset 0xE0: bit-3
RTL8169: set_rx_mode
RTL8169: init OK!
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0020
Trying to contact DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
No answer from DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90008000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
No answer from DHCP server
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
Link LocRTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
al IP assigned: 169.254.47.143
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
Exiting
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100

Спойлер: Показать
K : using mwait for idle loop
K : kernel SVN r5365
K : 4 CPU detected
Intel videocard detected, PciId=8086:0A16, which is unknown
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 80A988E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : EHCI 80A9D0A4: status of port 0 changed to 00001803
K : Attach Interrupt 1 Handler 800333B0
K : IRQ1 return code 8005C564
K : Attach Interrupt 12 Handler 80AA8546
K : EHCI 80A9D0A4 port 0 state is 00001801
K : EHCI 80A9D0A4: port 0 has HS or FS device, resetting
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:1, irq:B, addr:00004000
RTL8169: probe
RTL8169: init_board
RTL8169: init_board: TxConfig & 0x7c800000 = 0x44800000
RTL8169: init_board: chipset=2
RTL8169: MAC = 74-86-7A-59-63-87
RTL8169: hw_PHY_config: priv.mcfg=3, priv.pcfg=3
L: /SYS/NETWORK/ZEROCONF Param:
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
K : EHCI 80A9D0A4 status of port 0 is 00001005
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 00 80 04 00 00 00 00 01
K : found USB device with ID 8087:8000, 1 configuration(s)
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 0B 29 08 09 00 00 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/@PANEL Param:
RTL8169: Set MAC Reg C+CR Offset 0x82h = 0x01h
L: /SYS/@DOCKY Param:
RTL8169: Waiting for auto-negotiation to complete
K : final: hub 80828AA0 port 3 status 0101 change 01
K : final: hub 80828AA0 port 4 status 0101 change 01
K : final: hub 80828AA0 port 6 status 0101 change 01
K : final: hub 80828AA0 port 7 status 0101 change 01
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
¯à®¡ãî €®¡ ¢šâì ¢šàâã «ì­ë© €šáª
¥£® à §¬¥à ­¥ 㪠§ ­, 10% ᢮¡®€­®© Ž‡“ ¡ã€¥â šá¯®«ì§®¢ ­®
à §¬¥à €šáª  ¡ã€¥â: 244 MB
®¯¥à æšï ãᯥ譮 § ¢¥à襭 
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 D9 15 4F 0A 00 01 00 01 00 01
K : found USB device with ID 15D9:0A4F, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 11 01 00 01 22 42 00 07 05 81 03 06 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 85 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 16 00 F8 26 FF 07 75 0C 95 02 81 06 09 38 15 81 25 7F 75 08 95 01 81 06 C0 C0
K : device descriptor: 12 01 10 01 E0 01 01 40 F3 0C 36 00 01 00 00 00 00 01
K : found USB device with ID 0CF3:0036, 1 configuration(s)
K : config descriptor: 09 02 B9 00 02 01 00 E0 32 08 0B 00 02 E0 01 01 00 09 04 00 00 03 E0 01 01 00 07 05 81 03 10 00 01 07 05 82 02 40 00 01 07 05 02 02 40 00 01 09 04 01 00 02 E0 01 01 00 07 05 83 01 00 00 01 07 05 03 01 00 00 01 09 04 01 01 02 E0 01 01 00 07 05 83 01 09 00 01 07 05 03 01 09 00 01 09 04 01 02 02 E0 01 01 00 07 05 83 01 11 00 01 07 05 03 01 11 00 01 09 04 01 03 02 E0 01 01 00 07 05 83 01 19 00 01 07 05 03 01 19 00 01 09 04 01 04 02 E0 01 01 00 07 05 83 01 21 00 01 07 05 03 01 21 00 01 09 04 01 05 02 E0 01 01 00 07 05 83 01 31 00 01 07 05 03 01 31 00 01
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : USB interface class/subclass/protocol = E0/01/01
K : failed to load class driver
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : note: alternate setting with E0/01/01
K : final: hub 80828AA0 port 6 status 0503 change 10
K : device descriptor: 12 01 00 02 FF FF FF 40 DA 0B 29 01 60 39 01 02 03 01
K : found USB device with ID 0BDA:0129, 1 configuration(s)
K : config descriptor: 09 02 27 00 01 01 04 A0 FA 09 04 00 00 03 FF 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 07 05 83 03 03 00 0A
K : USB interface class/subclass/protocol = FF/06/50
K : failed to load class driver
K : device descriptor: 12 01 00 02 EF 02 01 40 45 0C AD 64 11 33 02 01 00 01
K : found USB device with ID 0C45:64AD, 1 configuration(s)
K : config descriptor: 09 02 49 02 02 01 00 80 FA 28 FF 42 49 53 54 00 01 06 01 10 00 00 00 00 00 D1 10 F4 01 D2 11 F4 01 D3 12 F4 01 D4 13 F4 01 D5 14 F4 01 D6 15 F4 01 08 0B 00 02 0E 03 00 05 09 04 00 00 01 0E 01 00 05 0D 24 01 00 01 67 00 C0 E1 E4 00 01 01 09 24 03 05 01 01 00 04 00 1A 24 06 03 70 33 F0 28 11 63 2E 4A BA 2C 68 90 EB 33 40 16 08 01 02 01 1F 00 1A 24 06 04 C3 85 B8 0F C2 68 47 45 90 F7 8F 47 57 9D 95 FC 08 01 03 01 0F 00 12 24 02 01 01 02 00 00 00 00 00 00 00 00 03 00 00 00 0B 24 05 02 01 00 00 02 7F 15 00 07 05 83 03 10 00 06 05 25 03 10 00 09 04 01 00 00 0E 02 00 05 0F 24 01 02 2B 01 81 00 05 00 00 00 01 00 00 1B 24 04 01 06 59 55 59 32 00 00 10 00 80 00 00 AA 00 38 9B 71 10 01 00 00 00 00 22 24 05 01 00 80 02 E0 01 00 00 65 04 00 00 CA 08 00 60 09 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 02 00 60 01 20 01 00 40 73 01 00 80 E6 02 00 18 03 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 03 00 40 01 F0 00 00 40 19 01 00 80 32 02 00 58 02 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 04 00 B0 00 90 00 00 D0 5C 00 00 A0 B9 00 00 C6 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 22 24 05 05 00 A0 00 78 00 00 50 46 00 00 A0 8C 00 00 96 00 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 1E 24 05 06 00 00 05 D0 02 00 00 AB 09 00 00 AB 09 00 20 1C 00 22 DF 0D 00 01 22 DF 0D 00 06 24 0D 01 01 04 0B 24 06 02 01 00 01 00 00 00 00 22 24 07 01 00 00 05 D0 02 18 14 30 0D 30 28 60 1A 4D 22 1C 00 15 16 05 00 02 15 16 05 00 2A 2C 0A 00 06 24 0D 01 01 04 09 04 01 01 01 0E 02 00 00 07 05 81 05 80 00 01 09 04 01 02 01 0E 02 00 00 07 05 81 05 00 01 01 09 04 01 03 01 0E 02 00 00 07 05 81 05 20 03 01 09 04 01 04 01 0E 02 00 00 07 05 81 05 20 0B 01 09 04 01 05 01 0E 02 00 00 07 05 81 05 20 13 01 09 04 01 06 01 0E 02 00 00 07 05 81 05 00 14 01
K : USB interface class/subclass/protocol = 0E/01/00
K : failed to load class driver
K : USB interface class/subclass/protocol = 0E/02/00
K : failed to load class driver
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
K : note: alternate setting with 0E/02/00
RTL8169: auto-negotiation complete
RTL8169: resetting
RTL8169: init_ring
RTL8169: hw_start
RTL8169: Attaching int handler to irq B
K : Attach Interrupt 11 Handler 80ABA558
RTL8169: Waiting for chip to reset... RTL8169: done!
RTL8169: Set MAC Reg C+CR Offset 0xE0: bit-3
RTL8169: set_rx_mode
RTL8169: init OK!
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0020
Trying to contact DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
No answer from DHCP server
RTL8169: Transmitting packet, buffer:80AB1000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90008000, size:304
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0008
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
No answer from DHCP server
RTL8169: Transmitting packet, buffer:90008000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
Link LoRTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
cal IP assigned: 169.254.47.143
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100
RTL8169: Transmitting packet, buffer:80AAB000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6110
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6110
RTL8169: Transmitting packet, buffer:80AB0000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6120
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6120
RTL8169: Transmitting packet, buffer:80AB0000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6130
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6130
RTL8169: Transmitting packet, buffer:80AB0000, size:60
RTL8169: To: FF-FF-FF-FF-FF-FF From: 74-86-7A-59-63-87 Type:0608
RTL8169: Using TX desc: 80AB6100
Exiting
RTL8169: INT
RTL8169: Device: 80AB6000 Status: 0084
RTL8169: TX ok!
RTL8169: Freeing up TX desc: 80AB6100


Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Сб янв 10, 2015 2:27 am 
Не в сети
Public Relations
Аватара пользователя

Зарегистрирован: Пн июн 07, 2010 12:01 pm
Сообщения: 1879
SVN r5365: ASRock Q2900-ITX (SoC Intel Pentium J2900)
Realtek RTL8168 PCIe Gigabit Ethernet - it doesn't work in KolibriOS, and also stops working in Windows 7 after warm reboot from KolibriOS (cold reboot is necessary to get it working in Windows 7 again).
Opened a Mantis bug as requested, and attached all info there: http://bugs.kolibrios.org/view.php?id=91
Цитата:
hidnplayr « Fri Jan 09, 2015 10:57 pm » yogev_ezra: Can you verify wether it can send/receive?
yogev_ezra « Fri Jan 09, 2015 10:57 pm » hidnplayr: How?
hidnplayr « Fri Jan 09, 2015 10:58 pm » (is it connected to the local network with your other computer?)
yogev_ezra « Fri Jan 09, 2015 10:58 pm » hidnplayr: It's connected to the home router, yes. Now sitting from the same computer on Windows 7 - DHCP received fine.
hidnplayr « Fri Jan 09, 2015 10:59 pm » yogev_ezra: If you ping an unexisting IP address on that LAN (from your windows computer), the KolibriOS computer should see the ARP packet on the LAN
yogev_ezra « Fri Jan 09, 2015 11:00 pm » hidnplayr: But how exactly do I capture that?
hidnplayr « Fri Jan 09, 2015 11:01 pm » yogev_ezra: You will see an increment in netstat for received ARP packets
hidnplayr « Fri Jan 09, 2015 11:01 pm » now, total received (ethernet) packets is 0
Tried also the PING test for around 5 minutes - 0 ARP packets received. 6 ARP packets appear sent (but that was without the PING test even).
Copy of the board log with DEBUG turned on for RTL8169 network driver is attached here as well.


Вложения:
RTL8168_DEBUG_LOG2.TXT [4.24 КБ]
42 скачивания
RTL8168_DEBUG_LOG.TXT [4.29 КБ]
40 скачиваний
Вернуться к началу
 Заголовок сообщения: Re: Драйвер RTL8169
СообщениеДобавлено: Сб янв 10, 2015 12:13 pm 
Не в сети
Mentor/Kernel Developer
Аватара пользователя

Зарегистрирован: Пт июн 30, 2006 9:01 am
Сообщения: 1211
yogev_ezra: thanks for a detailed report.

All other users with RTL8111/8168/8169, if you have two minutes time, can you check if the same applies to your card or not.
Please post this information here, together with PCI id's of the card (vendor id, device id and revision are enough)
This information can be obtained in NETCFG and PCIDEV programs in kolibri, "lspci -n" in linux, and even device manager in windows.

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein


Вернуться к началу
Показать сообщения за:  Поле сортировки  
Начать новую тему  Ответить на тему  [ 57 сообщений ]  На страницу Пред. 1 2 3 4 След.

Часовой пояс: UTC+03:00


Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость


Вы не можете начинать темы
Вы не можете отвечать на сообщения
Вы не можете редактировать свои сообщения
Вы не можете удалять свои сообщения
Вы не можете добавлять вложения

Найти:
Перейти:  
Создано на основе phpBB® Forum Software © phpBB Limited
Русская поддержка phpBB