Page 1 of 1

Realtek RTL8139

Posted: Wed Apr 29, 2015 7:06 pm
by punk_joker
It does not work network. No notification even successful network settings. Should two network cards. The second (rtl8169 works, though not for a long time)

Re: Драйвер rtl8139

Posted: Fri May 01, 2015 12:45 pm
by hidnplayr
punk_joker wrote:It does not work network. No notification even successful network settings. Should two network cards. The second (rtl8169 works, though not for a long time)
Current zeroconfig only works with the first registered network card.
Edit autorun.dat and remove "netcfg A".
After boot, run netcfg and select the wanted ethernet card.

(Or, remove rtl8169.obj from kolibri.img and only rtl8139.obj will be loaded)

Re: Драйвер rtl8139

Posted: Thu Jan 07, 2016 1:44 am
by punk_joker
rtl8139 Network some time stops working. On board: HTTP GET error

Re: Драйвер rtl8139

Posted: Thu Jan 07, 2016 10:18 am
by hidnplayr
More details please.
Are you using an emulator or real hardware?
Does the network completely stop working and does not recover?
When does it stop working? After heavy usage? After a certain amount of time, even when no heavy usage?

Re: Драйвер rtl8139

Posted: Thu Jan 07, 2016 2:02 pm
by punk_joker
In my case, it falls on the real hardware, and in the emulator. Falls after a certain period of time. Restarting @ zerokonf sometimes restores the network, but then it stops working again. When the connection can not be restored, written on board: not answer from DHCP server/

Re: Драйвер rtl8139

Posted: Tue Feb 02, 2016 12:58 pm
by punk_joker
I am tested another PCI lan card on chip rtl8139. Connected lan cable is detected, but network don't work.

P.S. My two cards on chip rtl8139 don't work in KolibriOS.

Re: Драйвер rtl8139

Posted: Tue Feb 02, 2016 1:41 pm
by hidnplayr
punk_joker:
Where is the Ethernet cable connected to? Is there a DHCP server on the network?
More details about the network card(s) please, post PCI vendor, device and revision ID or pcidev.txt
Also, what is the name of the interface(s) in netstat? (for example: RTL8139D)

Re: Драйвер rtl8139

Posted: Tue Feb 02, 2016 1:46 pm
by hidnplayr
Also, try (re)connecting the cable after the system had time to initialize.

Re: Драйвер rtl8139

Posted: Tue Feb 02, 2016 3:19 pm
by punk_joker
hidnplayr wrote:Also, try (re)connecting the cable after the system had time to initialize.
Reconnect the cable fails
Spoiler:RTL8139: no link
RTL8139: link changed to 100 mbit
Trying to contact DHCP server
DHCP failed
IP address 169.254.93.106 assigned to network interface 1 through Link-Local
IPv4_output: No route to host!
UDP_output: failed
CP866
CP866
IPv4_output: No route to host!
UDP_output: failed
RTL8139: no link
HTTP GET error!
CP866
CP866
RTL8139: link changed to 100 mbit
Trying to contact DHCP server
DHCP failed
IP address 169.254.220.189 assigned to network interface 1 through Link-Local
IPv4_output: No route to host!
UDP_output: failed
HTTP GET error!
CP866
CP866
K : destroy app object

Re: Драйвер rtl8139

Posted: Tue Feb 02, 2016 4:05 pm
by punk_joker
RTL8139D

Re: Драйвер rtl8139

Posted: Mon Feb 15, 2016 6:56 pm
by hidnplayr
punk_joker: There was a bug in TX configuration which resulted in problems on RTL8139D cards, this has been fixed.
Check again if everything works on latest nightbuild.