Board.KolibriOS.org

Official KolibriOS board
It is currently Sun Dec 15, 2019 1:03 am

All times are UTC+03:00




Post new topic  Reply to topic  [ 609 posts ]  Go to page Previous 15 6 7 8 941 Next
Author Message
PostPosted: Tue Feb 19, 2008 2:42 pm 
Offline

Joined: Sun Feb 04, 2007 2:07 pm
Posts: 178
Вторая. Sapphire Radeon x1600pro 512Mb PCI-e.

Code:
Unknown card detected: 000071C2:0000174B:00000000.
Detected an ATI Radeon X1600 PRO on an unidentified card
Memory base_0 C0000000 size 10000000
Memory base_1 00000000 size 00000001
Memory base_2 DFFE0000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000100
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 00000000 size 00000001
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 0000E800 size 00000100
Io base_5 00000000 size 00000001
Mapped IO at 80C9C000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
 SubsystemVendorID: 0x0000174B SubsystemID: 0x00000840
 IOBaseAddress: 0x0000E800
 Filename: 3C8403SA.008
 BIOS Bootup Message:
        RV530PRO BIOS DDR2 500e/405m                                         
               
Call to AtomBIOS Init succeeded
Detected VGA mode


Top
   
PostPosted: Tue Feb 19, 2008 5:13 pm 
Offline

Joined: Sat Jul 14, 2007 12:17 pm
Posts: 24
Пардон, невнимательно читал :).

Вот
Code:
Unknown card detected: 00007280:0000174B:00000000.
Detected an ATI Radeon X1950 on an unidentified card
Memory base_0 E0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 F1000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 00009000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80DC9000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
 SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E190
 IOBaseAddress: 0x00009000
 Filename: SA999E25.003
 BIOS Bootup Message:
        113-A99931-00 RV570 BIOS 702m/581e                                         
       
Call to AtomBIOS Init succeeded
Detected VGA mode.


.

_________________
Aka Rus.


Top
   
PostPosted: Wed Feb 20, 2008 12:04 am 
Offline

Joined: Wed May 18, 2005 7:27 pm
Posts: 1001
Второй тест

Code:
Unknown card detected: 00007187:0000174B:00000000.
Detected an ATI Radeon X1300/X1550 on an unidentified card
Memory base_0 D0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 E5000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 0000C000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80EE4000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
 SubsystemVendorID: 0x0000174B SubsystemID: 0x00003000
 IOBaseAddress: 0x0000C000
 Filename: JC8513SA.002
 BIOS Bootup Message:
   X1550 Rialto 256mb DDR2 BIOS 550e/400m Channel AB

Call to AtomBIOS Init succeeded
Detected VGA mode.


Top
   
PostPosted: Wed Feb 20, 2008 8:47 am 
Offline
Kernel Optimizer
User avatar

Joined: Mon Jan 16, 2006 7:58 pm
Posts: 657
Code:
Unknown card detected: 000071C6:0000174B:00000000.
Detected an ATI Radeon X1650 on an unidentified card
Memory base_0 D0000000 size 10000000
Memory base_1 00000000 size 00000100
Memory base_2 E1000000 size 00010000
Memory base_3 00000000 size 00000001
Memory base_4 00000000 size 00000001
Memory base_5 00000000 size 00000001
Io base_0 00000000 size 10000000
Io base_1 0000C000 size 00000100
Io base_2 00000000 size 00010000
Io base_3 00000000 size 00000001
Io base_4 00000000 size 00000001
Io base_5 00000000 size 00000001
Mapped IO at 80DB4000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
 SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E040
 IOBaseAddress: 0x0000C000
 Filename: 8E0402SA.003
 BIOS Bootup Message:
        RV530XT AGP Rialto BIOS DDR2 550e/650m                                     
Call to AtomBIOS Init succeeded
Detected VGA mode.


Top
   
PostPosted: Wed Feb 20, 2008 1:43 pm 
Offline
Kernel Developer

Joined: Wed Mar 08, 2006 6:25 pm
Posts: 3952
Спасибо всем за тесты.
Вот ещё один ftp://kolibrios.org/upload/rhd_03.7z
Большая часть для карт с ATOMBIOS. На других картах
просто повторение предыдущих.

Информация о разъёмах и подключённых устройствах
Quote:
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x01000000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x01000000
rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x01005000 VRAM End: 0x10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 500000
Default Memory Clock: 405000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 500000
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F27
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 1
Attaching Output DAC B to Connector DVI-I 1


Top
   
PostPosted: Wed Feb 20, 2008 7:31 pm 
Offline

Joined: Sat Jul 14, 2007 12:17 pm
Posts: 24
Вот третий тест
Code:
Detected an ATI Radeon X1950 on a Sapphire X1950 Pro
Memory base_0 0xE0000000 size 0x10000000
Memory base_2 0xF1000000 size 0x00010000
Io base_1 0x00009000 size 0x00000100
Mapped IO at 80DB3000 (size 00010000)
The detected amount of videoram exceeds the PCI BAR aperture.
Using only 262144kB of the total 524288kB.
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
 SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E190
 IOBaseAddress: 0x00009000
 Filename: SA999E25.003
 BIOS Bootup Message:
        113-A99931-00 RV570 BIOS 702m/581e                                         
       
Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x1FFFB000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x1FFFB000
rhdAtomAllocateFbScratch: FW FB scratch area 1FFFB000 (size: 00005000) extends beyond available framebuffer size 10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 581000
Default Memory Clock: 702000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 581000
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F2D
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: DVI-I Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
AtomBIOS Connector[9]: DVI-I Device: DFP3 Output: 4 HW DDC 0 HPD 1
Connector[0] {RHD_CONNECTOR_DVI, " CRT1 DFP3", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_DACA, RHD_OUTPUT_LVTMA } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1 DFP3) type 2, ddc 0, hpd 2
Attaching Output DAC A to Connector DVI-I 1
Attaching Output TMDS B to Connector DVI-I 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 2
Attaching Output DAC B to Connector DVI-I 2

.

_________________
Aka Rus.


Top
   
PostPosted: Thu Feb 21, 2008 9:10 am 
Offline
Kernel Optimizer
User avatar

Joined: Mon Jan 16, 2006 7:58 pm
Posts: 657
Unknown card detected: 000071C6:0000174B:0000E040.
Detected an ATI Radeon X1650 on an unidentified card
Memory base_0 0xD0000000 size 0x10000000
Memory base_2 0xE1000000 size 0x00010000
Io base_1 0x0000C000 size 0x00000100
Mapped IO at 80D9E000 (size 00010000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
SubsystemVendorID: 0x0000174B SubsystemID: 0x0000E040
IOBaseAddress: 0x0000C000
Filename: 8E0402SA.003
BIOS Bootup Message:
RV530XT AGP Rialto BIOS DDR2 550e/650m

Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x0FFFB000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x0FFFB000
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 600000
Default Memory Clock: 700000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 600000
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 00007F2F
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[3]: DVI-I Device: DFP1 Output: 3 HW DDC 1 HPD 0
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( DFP1 CRT2) type 2, ddc 1, hpd 1
Attaching Output TMDS A to Connector DVI-I 1
Attaching Output DAC B to Connector DVI-I 1


Top
   
PostPosted: Thu Feb 21, 2008 4:37 pm 
Offline
Kernel Developer

Joined: Wed Mar 08, 2006 6:25 pm
Posts: 3952
Новый супертест для карт с ATOMBIOS.
ftp://kolibrios.org/upload/rhd_04.7z

Определение монитора и доступных режимов.
начало теста повторяется поэтом интересен последний фрагмент
Quote:
EDID data for SyncMaster
Manufacturer: SAM Model: 2a1 Serial#: 1346777401
Year: 2007 Week: 24
EDID Version: 1.3
Digital Display Input
Max H-Image Size [cm]: horiz.: 38 vert.: 30
Gamma: 2.20
DPMS capabilities: Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
Supported VESA Video Modes:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Supported Future Video Modes:
#0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
#1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
#2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
Supported additional Video Mode:
clock: 108.0 MHz Image Size: 376 x 301 mm
h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 140 MHz
Monitor name: SyncMaster
Serial No: HMBP600201
Connector "DVI-I 1" uses Monitor "SyncMaster":
Bandwidth: 140MHz
Horizontal timing:
30.0 - 81.0kHz
Vertical timing:
56.0 - 75.0Hz
DPI: 86x87
Allows reduced blanking.
Attached modes:
Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
Modeline "640x480" 31.00 640 656 720 840 480 481 484 500 -hsync -vsync
Modeline "640x480" 31.00 640 664 704 832 480 489 491 520 -hsync -vsync
Modeline "640x480" 30.00 640 704 768 864 480 483 486 525 -hsync -vsync
Modeline "640x480" 25.00 640 656 752 800 480 490 492 525 -hsync -vsync
Modeline "720x400" 28.00 720 738 846 900 400 412 414 449 -hsync +vsync
Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
Modeline "1024x768" 78.00 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
Modeline "832x624" 57.00 832 864 928 1152 624 625 628 667 -hsync -vsync
Modeline "800x600" 49.00 800 816 896 1056 600 601 604 625 +hsync +vsync
Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
Modeline "1280x1024" 109.00 1280 1361 1496 1712 1024 1027 1034 1063 -hsync +vsync
Modeline "1280x960" 101.00 1280 1358 1493 1706 960 963 967 996 -hsync +vsync
Modeline "1152x864" 104.00 1152 1227 1349 1546 864 867 871 905 -hsync +vsync
Listing modesetting layout:

CRTC 1: tied to PLL 1 and LUT A:
Outputs: TMDS A (DVI-I 1)

CRTC 2: unused

Unused Outputs: DAC A, DAC B


Top
   
PostPosted: Thu Feb 21, 2008 7:22 pm 
Offline

Joined: Wed May 18, 2005 7:27 pm
Posts: 1001
Провести 3-й и 4-й тесты не удается. На доске отладки пишет
Unresolved PciRead16
Unresolved PciRead8
Unresolved PciWrite16
Unresolved PciWrite8


Top
   
PostPosted: Thu Feb 21, 2008 8:11 pm 
Offline
Kernel Developer

Joined: Wed Mar 08, 2006 6:25 pm
Posts: 3952
Wildwest
Надо обновить ядро до #747+. Можно скачать с rhd_02


Top
   
PostPosted: Fri Feb 22, 2008 3:03 pm 
Offline

Joined: Wed May 18, 2005 7:27 pm
Posts: 1001
Code:
Detected an ATI Radeon X1300/X1550 on a RV516 : Radeon X1300/X1550
Memory base_0 0xd0000000 size 0x10000000
Memory base_2 0xe5000000 size 0x10000
Io base_1 0xc000 size 0x100
Mapped IO at 80e9b000 (size 10000)
VideoRAM: 262144 kByte
Getting BIOS copy from legacy VBIOS location
ATOM BIOS Rom:
   SubsystemVendorID: 0x174b SubsystemID: 0x3000
   IOBaseAddress: 0xc000
   Filename: JC8513SA.002
   BIOS Bootup Message:
X1550 Rialto 256mb DDR2 BIOS 550e/400m Channel AB

Call to AtomBIOS Init succeeded
Framebuffer space used by Firmware (kb): 20
Start of VRAM area used by Firmware: 0x7ffb000
AtomBIOS requests 20kB of VRAM scratch space
AtomBIOS VRAM scratch base: 0x7ffb000
rhdAtomAllocateFbScratch: FW FB scratch area not located at the end of VRAM. Scratch End: 0x8000000 VRAM End: 0x10000000
Cannot get VRAM scratch space. Allocating in main memory instead
Call to AtomBIOS Set FB Space succeeded
Default Engine Clock: 550000
Default Memory Clock: 400000
Maximum Pixel ClockPLL Frequency Output: 1100000
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Input: 13500
Minimum Pixel ClockPLL Frequency Input: 1000
Maximum Pixel Clock: 400000
Reference Clock: 27000
Default Engine Clock: 550000
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 0" initialized.
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 1" initialized.
I2C clock prescale value: 0X7F2B
I2C bus "RHD I2C line 2" initialized.
Detected VGA mode.
Minimum Pixel ClockPLL Frequency Output: 0
Maximum Pixel ClockPLL Frequency Output: 1100000
Maximum Pixel Clock: 400000
Reference Clock: 27000
AtomBIOS Connector[0]: VGA Device: CRT1 Output: 1 HW DDC 0 NO HPD
AtomBIOS Connector[2]: SVIDEO Device: TV1 Output: 2 NO DDC NO HPD
AtomBIOS Connector[4]: DVI-I Device: CRT2 Output: 2 HW DDC 1 NO HPD
AtomBIOS Connector[9]: DVI-I Device: DFP3 Output: 4 HW DDC 1 HPD 1
Connector[0] {RHD_CONNECTOR_VGA, " CRT1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_DACA, RHD_OUTPUT_NONE } }
Connector[1] {RHD_CONNECTOR_TV, " TV1", DDC_NONE, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } }
Connector[2] {RHD_CONNECTOR_DVI, " CRT2 DFP3", RHD_DDC_1, RHD_HPD_0 /*swapped*/, { RHD_OUTPUT_DACB, RHD_OUTPUT_LVTMA } }
Call to AtomBIOS Get Connectors succeeded
RHDConnectorsInit: 0 ( CRT1) type 1, ddc 0, hpd 0
Attaching Output DAC A to Connector VGA 1
RHDConnectorsInit: 1 ( TV1) type 4, ddc 255, hpd 0
Attaching Output DAC B to Connector TV
RHDConnectorsInit: 2 ( CRT2 DFP3) type 2, ddc 1, hpd 2
Attaching Output DAC B to Connector DVI-I 1
Attaching Output TMDS B to Connector DVI-I 1
DACASense: DAC: 0x07
DACBSenseCRT: connector type 4 is not supported.
I2C device "RHD I2C line 0:ddc2" registered at address 0xa0.
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4993
Sections to follow: 0
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4988
SW_STATUS: 0x1 4998
SW_STATUS: 0x1 4996
DDC checksum not correct
Checksum error in EDID block
I2C device "RHD I2C line 0:ddc2" removed.
EDIDModeFromDetailedTiming: Ignoring: We only handle separate sync.
EDID data for AL1923
Manufacturer: ACR  Model: 783  Serial#: 4418
Year: 2006  Week: 35
EDID Version: 1.3
Analog Display Input,  Input Voltage Level: 0.700/0.700 V
Sync:  Separate
Max H-Image Size [cm]: horiz.: 37  vert.: 30
Gamma: 2.20
DPMS capabilities: Suspend Off; RGB/Color Display
First detailed timing is preferred mode
redX: 0.651 redY: 0.320   greenX: 0.300 greenY: 0.600
blueX: 0.153 blueY: 0.109   whiteX: 0.313 whiteY: 0.329
Supported VESA Video Modes:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Manufacturer's mask: 0
Supported Future Video Modes:
#0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
#1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
#2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
#3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
Supported additional Video Mode:
clock: 108.0 MHz   Image Size:   5 x 4 mm
h_active: 1280   h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
v_active: 1024   v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
Ranges: V min: 55  V max: 75 Hz, H min: 30  H max: 81 kHz, PixClock max 140 MHz
Monitor name: AL1923
 ACER-V1.00
Connector "VGA 1" uses Monitor "AL1923":
    Bandwidth: 140MHz
    Horizontal timing:
   30.0 - 81.0kHz
    Vertical timing:
   55.0 - 75.0Hz
    DPI: 88x87
    Attached modes:
   Modeline "800x600"  40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
   Modeline "800x600"  36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
   Modeline "640x480"  31.00  640 656 720 840  480 481 484 500 -hsync -vsync
   Modeline "640x480"  31.00  640 664 704 832  480 489 491 520 -hsync -vsync
   Modeline "640x480"  30.00  640 704 768 864  480 483 486 525 -hsync -vsync
   Modeline "640x480"  25.00  640 656 752 800  480 490 492 525 -hsync -vsync
   Modeline "720x400"  28.00  720 738 846 900  400 412 414 449 -hsync +vsync
   Modeline "1280x1024" 135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync
   Modeline "1024x768"  78.00  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
   Modeline "1024x768"  75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync
   Modeline "1024x768"  65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
   Modeline "832x624"  57.00  832 864 928 1152  624 625 628 667 -hsync -vsync
   Modeline "800x600"  49.00  800 816 896 1056  600 601 604 625 +hsync +vsync
   Modeline "800x600"  50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
   Modeline "1152x864" 108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync
   Modeline "1152x864" 104.00  1152 1227 1349 1546  864 867 871 905 -hsync +vsync
   Modeline "1280x720"  74.00  1280 1342 1474 1668  720 723 728 748 -hsync +vsync
   Modeline "1280x960" 101.00  1280 1358 1493 1706  960 963 967 996 -hsync +vsync
   Modeline "1280x1024" 109.00  1280 1361 1496 1712  1024 1027 1034 1063 -hsync +vsync
Listing modesetting layout:

   CRTC 1: tied to PLL 1 and LUT A:
      Outputs: DAC A (VGA 1)

   CRTC 2: unused

      Unused Outputs: DAC B, TMDS B


Top
   
PostPosted: Fri Feb 22, 2008 3:44 pm 
Offline
Kernel Developer

Joined: Wed Mar 08, 2006 6:25 pm
Posts: 3952
Wildwest
Quote:
clock: 108.0 MHz Image Size: 5 x 4 mm

Так всё время определяется?

P.S.
Хорошая новость. Смена видеорежима успешно работает.


Top
   
PostPosted: Fri Feb 22, 2008 10:49 pm 
Offline

Joined: Sat Jul 14, 2007 12:17 pm
Posts: 24
Четвёртый тест.


Attachments:
ATI.TXT [7.45 KiB]
Downloaded 116 times

_________________
Aka Rus.
Top
   
PostPosted: Sat Feb 23, 2008 2:46 pm 
Offline

Joined: Wed May 18, 2005 7:27 pm
Posts: 1001
всё время


Top
   
PostPosted: Sat Feb 23, 2008 5:19 pm 
Offline
Kernel Developer
User avatar

Joined: Mon Mar 20, 2006 10:44 am
Posts: 557
Serge
Смена режима через V86 или средствами драйвера?


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 609 posts ]  Go to page Previous 15 6 7 8 941 Next

All times are UTC+03:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited