Spoiler:
K : using mwait for idle loopK : kernel SVN r5202
K : 4 CPU detected
K : has_ownership
K : has_ownership
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 11 Handler 8098F8E6
K : EHCI controller at 00:D0 with 2 ports initialized
K : HCSPARAMS=00200002, HCCPARAMS=00036881
K : Attach Interrupt 7 Handler 8098F8E6
K : EHCI controller at 00:E8 with 2 ports initialized
K : EHCI 809940A4: status of port 0 changed to 00001803
K : EHCI 809970A4: status of port 0 changed to 00001803
K : EHCI 809940A4 port 0 state is 00001801
K : EHCI 809940A4: port 0 has HS or FS device, resetting
K : EHCI 809970A4 port 0 state is 00001801
K : EHCI 809970A4: port 0 has HS or FS device, resetting
K : EHCI 809940A4 status of port 0 is 00001005
K : EHCI 809970A4 status of port 0 is 00001005
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 24 00 00 00 00 00 00 01
K : found USB device with ID 8087:0024, 1 configuration(s)
K : device descriptor: 12 01 00 02 09 00 01 40 87 80 24 00 00 00 00 00 00 01
K : found USB device with ID 8087:0024, 1 configuration(s)
K : Attach Interrupt 1 Handler 80032C50
K : IRQ1 return code 8005BD48
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 01 00 0C
K : config descriptor: 09 02 19 00 01 01 00 E0 00 09 04 00 00 01 09 00 00 00 07 05 81 03 02 00 0C
K : USB interface class/subclass/protocol = 09/00/00
K : USB interface class/subclass/protocol = 09/00/00
K : hub config: 09 29 06 09 00 32 00 00 FF
K : found hub with 6 ports
K : hub config: 0B 29 08 09 00 32 00 00 00 FF FF
K : found hub with 8 ports
L: /SYS/LOADDRV Param: RDC
L: /SYS/NETWORK/NETCFG Param: A
RTL8169: Loading driver
RTL8169: Hooking into device, dev:0, bus:4, irq:5, addr:0000D000
L: /SYS/NETWORK/ZEROCONF Param:
K : final: hub 808272A0 port 2 status 0101 change 01
K : final: hub 808272A0 port 3 status 0101 change 01
K : final: hub 808272A0 port 4 status 0101 change 01
Zero-config service loaded
L: /SYS/MEDIA/PALITRA Param: H 007DCEDF 003C427F
L: /SYS/@PANEL Param:
L: /SYS/@DOCKY Param:
L: /SYS/SETUP Param: BOOT
L: /SYS/@ICON Param:
L: /SYS/@SS Param: ASSM
L: /SYS/TMPDISK Param: A0
trying to add disk
its size is not specified, 10% from free RAM will be used
new DiskSize: 305 MB
K : device descriptor: 12 01 00 02 09 00 02 40 AC 05 32 91 01 01 00 00 00 01
K : found USB device with ID 05AC:9132, 1 configuration(s)
K : config descriptor: 09 02 29 00 01 01 00 E0 32 09 04 00 00 01 09 00 01 00 07 05 81 03 01 00 0C 09 04 00 01 01 09 00 02 00 07 05 81 03 01 00 0C
K : USB interface class/subclass/protocol = 09/00/01
K : note: alternate setting with 09/00/02
K : hub config: 09 29 03 04 00 32 32 04 FF
K : found hub with 3 ports
operation completed successfully
L: /SYS/SEARCHAP Param:
K : device descriptor: 12 01 10 01 00 00 00 08 5E 04 83 00 00 00 01 02 00 01
K : found USB device with ID 045E:0083, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 A0 32 09 04 00 00 01 03 01 02 00 09 21 10 01 00 01 22 34 00 07 05 81 03 04 00 0A
K : USB interface class/subclass/protocol = 03/01/02
K : USB HID device detected
K : report descriptor: 05 01 09 02 A1 01 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 01 75 05 81 01 05 01 09 30 09 31 09 38 15 81 25 7F 75 08 95 03 81 06 C0 C0
K : final: hub 808272A0 port 4 status 0503 change 10
K : device descriptor: 12 01 00 02 00 00 00 40 DA 0B 52 01 97 81 01 02 03 01
K : found USB device with ID 0BDA:0152, 1 configuration(s)
K : config descriptor: 09 02 39 00 02 01 04 80 FA 09 04 00 00 02 08 06 50 05 07 05 01 02 00 02 00 07 05 82 02 00 02 00 09 04 01 00 01 03 00 00 00 09 21 11 01 00 01 22 1E 00 07 05 83 03 01 00 0A
K : USB interface class/subclass/protocol = 08/06/50
K : USB mass storage device detected
K : USB interface class/subclass/protocol = 03/00/00
K : USB HID device detected
K : 5 logical unit(s)
K : report descriptor: 06 1B FF 09 1B A1 01 09 1B 19 01 29 01 15 00 25 01 75 01 95 01 81 02 75 07 95 01 81 01 C0
K : Command 03 failed
K : Command 03 failed
K : final: hub 80828020 port 1 status 0101 change 01
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : Command 03 failed
K : media not ready
K : Command 03 failed
K : media not ready
K : Command 03 failed
K : media not ready
K : Command 03 failed
K : media not ready
K : Command 03 failed
K : media not ready
K : peripheral device type is 00
K : direct-access mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : peripheral device type is 00
K : direct-access mass storage device detected
K : error 9 after -1816844551 bytes in data stage
K : device descriptor: 12 01 10 01 00 00 00 08 AC 05 32 92 14 01 01 02 00 01
K : found USB device with ID 05AC:9232, 1 configuration(s)
K : config descriptor: 09 02 22 00 01 01 00 E0 01 09 04 00 00 01 03 00 00 00 09 21 11 01 00 01 22 37 00 07 05 81 03 08 00 10
K : USB interface class/subclass/protocol = 03/00/00
K : USB HID device detected
K : TD failed:
K : 00610420 00600FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : pipe now:
K : 0060D402 08084005 41020000 00610060
K : 00610420 00600FC0 80008D42 00000000
K : 00000000 00000000 00000000 00000000
K : report descriptor: 05 80 09 01 A1 01 15 00 26 FF 00 75 08 85 02 96 01 01 09 02 B2 02 01 05 82 95 02 85 10 09 10 B1 02 25 04 85 D6 09 D6 B1 02 25 07 85 E7 B1 02 26 FF 00 85 E4 81 02 C0
K : Attach Interrupt 5 Handler 809B6C98
RTL8169: init OK!
Trying to contact DHCP server
No answer from DHCP server
Searchap: additional partition is not found!
L: AUTORUN.DAT processed
No answer from DHCP server
No answer from DHCP server
Link Local IP assigned: 169.254.233.237
Exiting