Board.KolibriOS.org

can this OS connect to the network using some device like modem

thanks

Currently KolibriOS can connect to the internet only via LAN (ethernet) port. Other connection types (WiFi, GPRS, 3G etc.) are not supported. The LAN port has to be connected to router - it can't be connected directly to modem (because the router has to setup the ADSL/Cable connection).

what is the web browser I use to get on the internet?

Sorry for the delay. Right now, KolibriOS has just text-only Web browser, called HTMLv. You can start it from Menu-> Network -> Client -> Text-based browser.

I have an IBM Thinkpad 360E (Pentium II /256MB RAM). Kolibri OS loads and runs quite well on it. However the lan connection via cardbus (Texas Instruments), is not recognised. So I cannot get on the web. I would appreciate any help. Thanks

Hi! Sorry, but cardbus is not supported. Only LAN.
See http://wiki.kolibrios.org/wiki/Hardware ... t/#Network

_________________
Звиздеть не мешки ворочать

Any chance of support in the near future ?

Nope very sorry, we are a small project and can not provide the support of such rare and outdated hardware considering the point that such support is rather complex.

_________________
Звиздеть не мешки ворочать

Hello and welcome,

I did some tests on a similar system some years ago, but couldn't get the cardbus properly initialized..
Maybe if you're lucky, it works on your hardware however.. viewtopic.php?f=3&t=2513

What LAN card do you have?

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein

Thanks. It was a nice dream but reality is reality.
regards
h.godavari

h.godavari
I was a bit too fast, please check the hidnplayr's solution.

_________________
Звиздеть не мешки ворочать

Hello:
the cardbus (fast ethernet pc card) was made by OVISLINK (Model: LFS-PCM-32DF). Ovislink provides two drivers for Linux, one for each of kernals 2.2 & 2.4 at this location:

https://contents.driverguide.com/conten ... README.TXT
Can either one of these be used with (or adapted to) Kolibri OS? Thanks for your consideration.

According to that documentation, your card is based on RTL8139 chip.
If we can get the cardbus bridge wording, I see no problem to get this network card working with existing RTL8139 driver for kolibrios.

BR,

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein

What do I need to do, to get the cardbus bridge working?

For starters, this driver needs further development:
http://websvn.kolibrios.org/filedetails ... 8&peg=8038

But I don't know if that's something up your alley

BR,

_________________
"Any intelligent fool can make things bigger, more complex, and more violent. It takes a touch of genius -- and a lot of courage -- to move in the opposite direction." Albert Einstein