Page 3 of 3
Re: Работа с сетью
Posted: Mon Jul 15, 2013 10:43 am
by hidnplayr
G@К wrote:Привет
Не нашел как настроить IP вручную для сети (роутер не назначает ip адрес, возможно не работает DHCP)
It needs to be set in network.ini
In the future, netstat should also be able to do it.
Re: Работа с сетью
Posted: Mon Jul 29, 2013 8:27 am
by G@К
Zeroconf
Не хватает нуля после имени файла
И еще нужно изменить код, при обращении к api-ipv4
примерно на такой
Code: Select all
mov ebx , API_IPv4+3
mov bh, [device]
mcall 76, , edx
invoke ini.get_str, path, str_ipconfig, str_gateway, inibuf, 16, 0
mov edx, inibuf
call Ip2dword
mov ebx , API_IPv4+9
mov bh, [device]
mcall 76, , edx
invoke ini.get_str, path, str_ipconfig, str_dns, inibuf, 16, 0
mov edx, inibuf
call Ip2dword
mov ebx , API_IPv4+5
mov bh, [device]
mcall 76, , edx
invoke ini.get_str, path, str_ipconfig, str_subnet, inibuf, 16, 0
mov edx, inibuf
call Ip2dword
mov ebx , API_IPv4+7
mov bh, [device]
mcall 76, API_IPv4 + 7, edx
Re: Работа с сетью
Posted: Mon Jul 29, 2013 9:17 pm
by hidnplayr
G@К: The first error should be fixed now, the second, I did not understand, sorry
Re: Работа с сетью
Posted: Tue Jul 30, 2013 11:27 pm
by G@К
G@К wrote:
И еще нужно изменить код, при обращении к api-ipv4
hidnplayr wrote: I did not understand
Zeroconf работает с network.ini IP адрес устанавливается в loopback
Re: Работа с сетью
Posted: Wed Jul 31, 2013 12:07 am
by hidnplayr
Ok, should be fixed now
Re: Работа с сетью
Posted: Mon Aug 23, 2021 9:42 pm
by hidnplayr
punk_joker wrote:Не определяется сетевуха в последней ночной сборке: Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0)
Do you still have it? It can be made to work with latest AR81xx driver but have been unable to test.