K : edx=00005012 K : has_ownership K : enter ehci_init K : HCSPARAMS=00001414, HCCPARAMS=00005012 K : stopped K : reset ok K : attaching to IRQ 0A K : EHCI controller at 00:7D with 4 ports initialized K : OHCI controller at 00:7C with 4 ports initialized K : [232] EHCI 80A2C094: status of port 0 changed to 00001803 K : [232] EHCI 80A2C094: status of port 1 changed to 00001803 K : 1 CPU detected Zero-config service: Detected card: 813910EC Cable disconnected! K : [244] EHCI 80A2C094 port 0 state is 00001801 K : [244] EHCI 80A2C094: port 0 has HS or FS device, resetting K : [244] EHCI 80A2C094 port 1 state is 00001801 K : [248] EHCI 80A2C094: reset port 0 done ========= tmpdisk 0.45 ========= trying to add disk disk size is not specified 10% from free RAM will be used, new DiskSize: 48 MB operation completed successfully K : [253] EHCI 80A2C094 status of port 0 is 00001005 K : address set in device K : [255] EHCI 80A2C094: port 1 has HS or FS device, resetting K : async advance doorbell K : async advance int K : [257] EHCI 80A2C094: reset port 1 done K : address set for controller K : descr8: l=00000010; 12 01 00 02 00 00 00 40 K : [259] EHCI 80A2C094 status of port 1 is 00001005 K : async advance doorbell K : async advance int K : address set in device K : async advance doorbell K : async advance int K : address set for controller K : descr8: l=00000010; 12 01 00 02 09 00 01 40 K : descr: l=00000012 K : 12 01 00 02 00 00 00 40 51 09 07 16 00 02 01 02 03 01 K : found USB device with ID 0951:1607, 1 configurations K : async advance doorbell K : async advance int K : descr: l=00000012 K : 12 01 00 02 09 00 01 40 8F 05 54 62 00 01 00 00 00 01 K : found USB device with ID 058F:6254, 1 configurations K : know_length: l=00000008 K : 09 02 19 00 01 01 00 E0 K : got_config: l=00000019 K : 09 02 19 00 01 01 00 E0 32 09 04 00 00 01 09 00 00 00 07 05 81 03 01 00 0C K : know_length: l=00000008 K : 09 02 20 00 01 01 00 80 K : USB interface class/subclass/protocol = 09/00/00 K : hub config: 09 29 04 80 00 32 64 00 FF K : found hub with 4 ports K : got_config: l=00000020 K : 09 02 20 00 01 01 00 80 64 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00 K : USB interface class/subclass/protocol = 08/06/50 K : USB mass storage device detected K : 1 logical unit(s) K : peripheral device type is 00 K : direct-access mass storage device detected K : media is ready K : 0 attempts, 0 ticks K : sector size is 512, last sector is 15753215 K : [274] int pipe for hub 80823C90 K : [274] hub 80823C90 port 03 clear feature 16 K : final: hub 80823C90 port 3 status 0101 change 01 K : [284] [main] hub 80823C90 port 03 query status K : [284] [connect test] hub 80823C90 port 03 status 0101 change 0000 K : [284] hub 80823C90 port 03 initiate reset K : [284] hub 80823C90 port 03 reset started K : [285] [main] hub 80823C90 port 03 query status K : hub 80823C90 port 03 ResetStatusData = 0111 change = 0000 K : [286] [main] hub 80823C90 port 03 query status K : hub 80823C90 port 03 ResetStatusData = 0503 change = 0010 K : [286] hub 80823C90 port 03 clear feature 20 K : [288] hub 80823C90 port 03 speed 2 K : address set in device K : async advance doorbell K : async advance int K : address set for controller K : descr8: l=00000010; 12 01 00 02 FF FF FF 40 K : async advance doorbell K : async advance int K : descr: l=00000012 K : 12 01 00 02 FF FF FF 40 F0 1A 11 05 00 01 01 02 00 01 K : found USB device with ID 1AF0:0511, 1 configurations K : know_length: l=00000008 K : 09 02 C1 00 01 01 00 80 K : got_config: l=000000C1 K : 09 02 C1 00 01 01 00 80 64 09 04 00 00 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 00 01 09 04 00 01 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 80 00 01 09 04 00 02 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 02 01 09 04 00 03 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 04 01 09 04 00 04 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 0B 01 09 04 00 05 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 0C 01 09 04 00 06 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 80 13 01 09 04 00 07 02 FF 00 00 00 07 05 83 03 08 00 07 07 05 82 01 00 14 01 K : USB interface class/subclass/protocol = FF/00/00 K : 07/xx/xx attached K : unknown device K : USB device initialization failed K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 K : note: alternate setting with FF/00/00 Cable disconnected! Cable disconnected! K : process CPU kills slot 4 [ZEROCONF] K : [2950] EHCI 80A2C094: status of port 2 changed to 00001003 K : [2960] EHCI 80A2C094 port 2 state is 00001801 K : [2960] EHCI 80A2C094: port 2 has HS or FS device, resetting K : [2962] EHCI 80A2C094: reset port 2 done K : [2964] EHCI 80A2C094 status of port 2 is 00001801 K : releasing to companion K : [2964] EHCI 80A2C094: status of port 2 changed to 00003002 K : port_after_reset [2977] status of port 2 is 00000103 K : address set in device K : address set for controller K : descr8: l=00000010; 12 01 00 02 00 00 00 40 K : descr: l=00000012 K : 12 01 00 02 00 00 00 40 F0 03 17 2B 00 01 01 02 03 01 K : found USB device with ID 03F0:2B17, 1 configurations K : know_length: l=00000008 K : 09 02 20 00 01 01 00 C0 K : got_config: l=00000020 K : 09 02 20 00 01 01 00 C0 31 09 04 00 00 02 07 01 02 00 07 05 01 02 40 00 00 07 05 81 02 40 00 00 K : USB interface class/subclass/protocol = 07/01/02 K : 07/xx/xx attached K : USB printer is ready to work K : USB printer attached K : alloc memory K : look for OUT endpoint K : next descriptor K : all data in descriptor? K : check if OUT K : load params from descriptor K : open pipe! K : pipe is opened K : start printing K : return something after USB Normal Transfer... K : print finishedK : USB device disconnected K : [4359] EHCI 80A2C094: status of port 2 changed to 00001003 K : [4369] EHCI 80A2C094 port 2 state is 00001801 K : [4369] EHCI 80A2C094: port 2 has HS or FS device, resetting K : [4371] EHCI 80A2C094: reset port 2 done K : [4373] EHCI 80A2C094 status of port 2 is 00001005 K : address set in device K : async advance doorbell K : async advance int K : address set for controller K : descr8: l=00000010; 12 01 00 02 00 00 00 40 K : async advance doorbell K : async advance int K : descr: l=00000012 K : 12 01 00 02 00 00 00 40 F0 03 17 2B 00 01 01 02 03 01 K : found USB device with ID 03F0:2B17, 1 configurations K : know_length: l=00000008 K : 09 02 20 00 01 01 00 C0 K : got_config: l=00000020 K : 09 02 20 00 01 01 00 C0 31 09 04 00 00 02 07 01 02 00 07 05 01 02 00 02 00 07 05 81 02 00 02 00 K : USB interface class/subclass/protocol = 07/01/02 K : 07/xx/xx attached K : USB printer is ready to work K : USB printer attached K : alloc memory K : look for OUT endpoint K : next descriptor K : all data in descriptor? K : check if OUT K : load params from descriptor K : open pipe! K : pipe is opened K : start printing K : return something after USB Normal Transfer... K : print finishedK : [5182] EHCI 80A2C094: status of port 0 changed to 00001002 K : USB mass storage device disconnected K : async advance doorbell K : async advance int K : USB device disconnected K : [5420] EHCI 80A2C094: status of port 0 changed to 00001803 K : [5430] EHCI 80A2C094 port 0 state is 00001801 K : [5430] EHCI 80A2C094: port 0 has HS or FS device, resetting K : [5432] EHCI 80A2C094: reset port 0 done K : [5434] EHCI 80A2C094 status of port 0 is 00001005 K : address set in device K : async advance doorbell K : async advance int K : address set for controller K : descr8: l=00000010; 12 01 00 02 00 00 00 40 K : async advance doorbell K : async advance int K : descr: l=00000012 K : 12 01 00 02 00 00 00 40 51 09 07 16 00 02 01 02 03 01 K : found USB device with ID 0951:1607, 1 configurations K : know_length: l=00000008 K : 09 02 20 00 01 01 00 80 K : got_config: l=00000020 K : 09 02 20 00 01 01 00 80 64 09 04 00 00 02 08 06 50 00 07 05 81 02 00 02 00 07 05 02 02 00 02 00 K : USB interface class/subclass/protocol = 08/06/50 K : USB mass storage device detected K : 1 logical unit(s) K : peripheral device type is 00 K : direct-access mass storage device detected K : media is ready K : 0 attempts, 0 ticks K : sector size is 512, last sector is 15753215